Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
24TE04
Although the flow shut-off valve is covered by Toyota’s New Vehicle Limited Warranty for 36 months or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing coverage for repairs related to Flow Shut-off Valve Coolant Leak.
T-SB-0097-23 Rev1
Some 2018 – 2024 model year Camry and 2018 – 2026 model year Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass.
T-SB-0104-21 Rev2
OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
T-SB-0106-22 Rev2
OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.
T-SB-0001-26
Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
T-SB-0055-24 Rev2
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0010-24 Rev2
Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected
T-SB-0112-24 Rev2
Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0058-23 Rev1
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-TT-0780-25
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0112-24 Rev1
Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0010-24 Rev1
Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected
T-SB-0035-24 Rev2
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev2
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev2
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0061-23 Rev2
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
T-SB-0112-24
Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0062-23 Rev2
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
T-SB-0032-23 Rev2
OBSOLETE NOTICE November 05, 2024: This bulletin is now obsolete. Please see T-SB-0101-24.
T-SB-0101-24
Some 2019 – 2022 model year Avalon and Avalon Hybrid, 2018 – 2024 model year Camry, and 2018 – 2025 model year Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked and/or a carpet loop is torn. The condition(s) can occur on both the driver and front passenger sides of the vehicle. An improved floor mat No. 2 has been developed to reduce the likelihood of these conditions.
T-SB-0055-24 Rev1
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0035-24 Rev1
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev1
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev1
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0055-24
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0103-20 Rev1
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
T-SB-0061-23 Rev1
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
T-SB-0062-23 Rev1
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
T-SB-0044-24
Some 2018 – 2019 model year Toyota Camry vehicles equipped with an A25A-FKS engine may exhibit reduced engine power and/or a MIL ON condition with one or more of the following throttle body Diagnostic Trouble Codes (DTCs) present in freezing temperatures: •P210015: Throttle Actuator “A” Control Motor Circuit Short to Battery or Open. •P210019: Throttle Actuator “A” Control Motor Circuit Current Above Threshold. •P211172: Throttle Actuator “A” Control System Actuator Stuck Open. •P01201C: Throttle / Pedal Position Sensor / Switch “A” Circuit Voltage Out of Range. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0035-24
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
T-SB-0039-24
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-TT-0754-24
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
T-PANT-2024-004-
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
TSB001024
TSB: Some 2021 ? 2022 model year Avalon, 2018 ? 2024 Camry, and 2019 ? 2024 RAV4 vehicles with A25A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F ? 41°F: ?P030027 ? Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold ?P030000 ? Random/Multiple Cylinder Misfire Detected ?P030100 ? Cylinder 1 Misfire Detected ?P030200 ? Cylinder 2 Misfire Detected ?P030300 ? Cylinder 3 Misfire Detected ?P030400 ? Cylinder 4 Misfire Detected Follow the Repair Procedure in this bulletin to address these conditions.
TSB010622
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
TSB010421
TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
TSB011620
OBSOLETE NOTICE December 04, 2023: This bulletin is now obsolete. Please see T-SB-0097-23.
TSB009723
TSB: Some 2018 ? 2024 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition.
TSB005823
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
TSB003220
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TSB005123
OBSOLETE NOTICE August 17, 2023: This bulletin is no longer applicable and is now obsolete
TTT073723
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
T-SB-0032-23
TSB: Some 2019 ? 2022 model year Avalon and Avalon Hybrid and 2018 ? 2023 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles.
TSB-0032-23
TSB: Some 2019 ? 2022 model year Avalon and Avalon Hybrid and 2018 ? 2023 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles
T-SB-0057-18
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
T-SB-0017-23
TSB: Some 2018 ? 2020 model year Camry Hybrid and 2019 ? 2020 model year Avalon Hybrid vehicles equipped with a A25A-FXS engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P05A074 (Active Grill Air Shutter ?A? Actuator Slipping). To address these concerns an updated radiator shutter sub-assembly was developed
23TE01 Dealer Pa
DP: Although the high-pressure fuel pump is covered by Toyota?s New Vehicle Limited Warranty for 5 years or 60,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the presence of a fuel odor in or around the engine bay originating at the high-pressure fuel pump of the subject vehicles.
T-TT-0699-22 Rev
TT: Some Model Year 2018-2023 vehicles equipped with A25A-FKS/FXS or M20A-FKS/FXS engines may display the following message ?Engine Maintenance Required Visit Your Dealer? on the combination meter
T-SB-0115-22 Rev
TSB: Some 2019 ? 2022 model year Avalon, 2018 ? 2023 model year Camry, 2017 ? 2022 model year Highlander, and 2017 ? 2020 model year Sienna vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump at idle.
23TE04
DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Toyota?s agreement to provide a Customer Support Program for certain 2014-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20TA02, Safety Recall 21TA03, Safety Recall 21TA05 or Special Service Campaign 21TC03. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
TSB000923
TSB: Some 2014 ? 2020 model year Toyota vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions.
T-SB-0115-22
TSB: Some 2019 ? 2022 model year Avalon, 2018 ? 2023 model year Camry, 2017 ? 2022 model year Highlander, 2017 ? 2020 model year Sienna, and 2016 ? 2023 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump at idle. Follow the Repair Procedure in this bulletin to address this condition
T-TT-0611-20 Rev
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-SB-0119-20 Obs
OBSOLETE NOTICE December 08, 2022: This bulletin is now obsolete. Please see T-SB-0106-22.
T-SB-0106-22
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
T-SB-0094-21 Rev
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0015-20 Obs
OBSOLETE NOTICE September 26, 2022: This bulletin is now obsolete. Please see T-SB-0088-22.
T-SB-0088-22
TSB: Some 2018 ? 2022 model year Camry and Camry Hybrid vehicles may exhibit a brake squeal/squeak noise from the front brake components. A new brake caliper assembly and fitting kit has been developed to address this condition. Follow the Repair Procedures in this bulletin to address this condition
T-TT-0708-22
TT: Some Model Year 2018-2022 vehicles equipped with A25A-FKS or A25A-FXS engines may experience a MIL ON condition with the following DTCs: P043F00, P043E00, P24007E, P24007F, P24187E
TTT069922
TT: Some Model Year 2018-2021 vehicles equipped with A25A-FKS/FXS or M20A-FKS/FXS engines may display the following message ?Engine Maintenance Required Visit Your Dealer? on the combination meter.
TSB001221Rev2
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0015-21 Rev
TSB: This Service Bulletin provides a procedure to properly perform the Techstream ?Control the Injection Mode? active test in some 2016 ? 2022 model year Toyota vehicles equipped with an FKS engine
TSB009421Rev1
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
TTT069522
TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
TSB013118Rev2
TSB: Some 2018 ? 2022 model year Camry and Camry Hybrid vehicles with a panoramic roof may exhibit a gap between the interior center garnish panel and roof and/or an interior center garnish panel that is loose. Follow the Repair Procedure in this bulletin to address this condition
TSB011620Rev2
TSB: Some 2018 ? 2022 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition
22TE02
RL: Although the Steering Intermediate Shaft is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to a steering wheel which potentially, over time, requires the effort to turn the steering wheel to gradually increase and/or for the steering wheel to gradually become slower to return to center. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
Customer Support
DP: Although the Steering Intermediate Shaft is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to a steering wheel which potentially, over time, requires effort to turn the steering wheel to gradually increase and/or for the steering wheel to gradually become slower to return to center
TSB002822
TSB: Some 2018 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the steering wheel requires increased effort and/or exhibits reduced return to center. The steering wheel may exhibit a slight resistance at certain points during low-speed steering maneuvers. This condition may be caused by the lower universal joint of the steering intermediate shaft assembly. A new steering intermediate shaft assembly has been developed to address this condition
TSB002019
OBSOLETE NOTICE March 22, 2022: This bulletin is now obsolete. Please see T-SB-0024-22.
TSB002422
TSB: Some 2018 model year Camry and Camry Hybrid, 2019 model year Avalon and Avalon Hybrid, 2020 ? 2021 model year Highlander, Highlander Hybrid, and Corolla, and 2021 model year Sienna Hybrid vehicles may exhibit decreased front windshield defroster performance at extremely low ambient temperatures. This condition may be the result of the fresh/recirculation servo actuator separating from the servo. This condition does not affect the airflow of the defroster. Follow the Repair Procedure in this bulletin to address this condition.
TTT063620
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
T-TT-0686-22
TT: The purpose of this Tech Tip is to provide diagnostic tips to prevent misdiagnosis of the following DTC?s and prevent repeat repairs. One or more of the Heated Oxygen Sensors (O2) or Air Fuel ratio sensor (A/F) DTCs below could set due to a leaking exhaust system. If you encounter a vehicle with any of these DTCs
T-TT-0687-22
TT: When customers have a concern about a discharged battery, no start, or general battery concern, the DCA-8000 is the only appropriate tool to use for diagnosis
T-SB-0012-21 Rev
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0119-20 Rev
TSB: Some 2018 ? 2020 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
T-SB-0104-21
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit one or more of the following conditions: ?Milky/Discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch "A" Signal Stuck in Range) and/or P052477 (Engine Oil Pressure too low [Severe]). Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
T-SB-0094-21
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0088-21
TSB: For proper calibration of the millimeter wave radar sensor, the vehicle and radar target must be on a level surface with a consistent plane. If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor.
T-TT-0578-19 Rev
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-SB-0116-20 Rev
TSB: Some 2018 ? 2021 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0663-21
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
T-TT-0631-20 Rev
TT: NOTE: This document only applies to certain audio packages for the following vehicles. 2019 C-HR (Audio Plus & Premium Only) 2020 Prius (Audio Only) 2020 Prius Prime (Audio Plus Only) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi Pre-Paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the Pre-Paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi Trial.
T-SB-0080-19 Rev
TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
T-SB-0046-20 Obs
OBSOLETE NOTICE July 09, 2020: This bulletin is now obsolete. Please see T-SB-0053-21.
T-SB-0053-21
TSB: Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation. ?Screen freezing. ?Intermittent rebooting. ?Abnormal clock operation. ?Abnormal Apple CarPlay® operation. ?Echoing during Apple CarPlay® phone call. ?Abnormal Pandora® operation after answering WhatsApp phone call. ?Alexa® app inoperative when using iOS devices. Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation. ?Screen freezing. ?Intermittent rebooting. ?Abnormal clock operation. ?Abnormal Apple CarPlay® operation. ?Echoing during Apple CarPlay® phone call. ?Abnormal Pandora® operation after answering WhatsApp phone call. ?Alexa® app inoperative when using iOS devices. Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1050) or Premium Audio (version 1050) or earlier may exhibit one or more of the following conditions: ?Intermittent rebooting. ?Pixelated screen during phone calls when using Apple CarPlay®. Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Premium Audio (navigation version 1030 or 1040) or earlier may exhibit one or more of the following conditions: ?Navigation expiration pop-up that is more than a year in the future. ?Destination ETA calculation does not account for time zone change or daylight-saving time.
T-SB-0122-20 Rev
TSB: Some 2017 ? 2018 model year Highlander and Sienna, 2018 model year Camry, and 2019 model year Avalon vehicles with and without the stop and start feature may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P07407E and/or P27567F. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
Toyota PRO21-UFR
UPDATES TO THE 2014-2021 TOYOTA UNIVERSAL FLAT RATE MANUAL
T-SB-0071-20 Rev
TSB: Some 2019 model year Avalon and Avalon Hybrid vehicles equipped with Entune? Audio Plus (version 1002) or Entune? Premium Audio (version 1002) or earlier may exhibit one or more of the following conditions: ?Incorrect GPS date and time. ?Abnormal Bluetooth® operation. ?Abnormal Wi-Fi operation. ?Microphone remains on the screen after voice recognition failure. ?Unable to see text with headlights on (text is the same color as the background). Some 2019 ? 2020 model year Toyota vehicles equipped with Entune? Audio (version 1007), Entune? Audio Plus (version 1011), or Entune? Premium Audio (version 1011) or earlier may exhibit one or more of the following conditions: ?Phone does not auto-connect on startup. ?Intermittent black screen. ?Apple CarPlay® home screen widget turns white when USB flash drive is disconnected. ?Abnormal phone book sorting. ?Unable to see DCM Status when in dark red or dark blue modes. ?XM no signal banner appears at all times. ??Check antenna,? ?ID Displaying,? or ?Seeking? always displays on XM mode. ?Unable to switch Bluetooth® devices. ?Apps button is inactive in the voice recognition hint screen when using Apple CarPlay®. ?Incorrect Spanish translations. ?Voice recognition is not canceled during a phone call. ?Low Easy Speak volume. ?Voice recognition ?Web Search? is inoperative. ?Entune? apps are inoperative and ?When it is safe and legal to do so, please ensure your Entune? App Suite application is running and logged in on your phone? pop-up appears. ?Download screen appears even though nothing is being downloaded. ?Intermittent partially white screen. ?Screen intermittently locked. ?Text goes off the edge of the screen. ?Screen is black for 10 seconds after shifting out of Reverse when using Apple CarPlay® A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the softwa
J0P - Dealer Let
J0P - Dealer Letter - Expired 4.30.2021
T-SB-0015-21
TSB: This Service Bulletin provides a procedure to properly perform the Techstream ?Control the Injection Mode? active test in some 2016 ? 2021 model year Toyota vehicles equipped with an FKS engine.
T-SB-0044-16 Obs
OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0012-21.
Toyota Safety Re
Toyota Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0636-20 Rev
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0012-21
TSB: Some 2010 ? 2021 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0032-20 Rev
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-SB-0122-20
TSB: Some 2017 ? 2018 model year Highlander and Sienna, 2018 model year Camry, and 2019 model year Avalon vehicles with and without the stop and start feature may exhibit a flex lock-up concern and MIL ON with Diagnostic Trouble Codes (DTCs) P07407E and/or P27567F. Vehicles that have experienced a delay in engagement from R to D will experience flex lock-up concerns from loss of solenoid pressure. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition.
T-SB-0129-18 Rev
TSB: Some 2018 ? 2020 model year Camry and Camry Hybrid vehicles with brushed aluminum or gray metallic trim may exhibit a condition where the instrument panel LH and RH outside register assemblies reflect upon the side window glass.
T-TT-0636-20
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0010-18 Rev
TSB: When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2018 model year Camry vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle.
T-SB-0013-19 Rev
TSB: Some 2016 ? 2018 model year Prius and Tacoma, 2017 ? 2018 model year Prius Prime and Sienna, and 2018 model year Camry and Camry Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P261093 (ECM/PCM Engine Off Timer Performance No Operation) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0047-19 Obs
OBSOLETE NOTICE December 11, 2020: This bulletin is now obsolete. Please see T-SB-0119-20.
T-SB-0071-18 Rev
TSB: Some 2018 model year Camry and 2019 model year Avalon vehicles equipped with 2GR-FKS (V6) engines may exhibit a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?P030000 ? Random/Multiple Cylinder Misfire Detected. ?P030027 ? Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold. ?P030085 ? Random/Multiple Cylinder Misfire Detected (Over Temperature) Signal Above Allowable Range. ?P030500 ? Cylinder 5 Misfire Detected. ?P030600 ? Cylinder 6 Misfire Detected. ?P160500 ? Rough Idling. Common characteristics when the misfire occurs are: ?High engine speed (5000 ? 6500 rpm). ?High engine load (100%+). ?Accelerator pedal position at 100%. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0119-20
TSB: Some 2018 ? 2020 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
T-SB-0116-20
TSB: Some 2018 ? 2020 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0110-20
TSB: This bulletin includes basic procedures for performing an at battery rescue charge on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
T-TT-0631-20
TT: NOTE: This document only applies to certain audio packages for the following vehicles. 2019 C-HR (Audio Plus & Premium Only) 2020 Prius (Audio Only) 2020 Prius Prime (Audio Plus Only) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi Pre-Paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the Pre-Paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account.
T-TT-0628-20
TT: HVAC drain tube is found to be blocked/clogged.
T-SB-0103-20
TSB: This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 ? 2021 model year Toyota vehicles.
T-SB-0062-20 Rev
TSB: Some 2004 ? 2020 model year Hybrid vehicles may exhibit an excessive buildup of dust, lint, or debris in the HV battery intake filter or cooling fan. The condition could reduce the efficiency of the HV battery cooling system. Perform the procedures outlined in this bulletin to address this condition.
T-SB-0015-20 Rev
TSB: Some 2018 ? 2020 model year Camry and Camry Hybrid vehicles may exhibit a brake squeal/squeak noise from the front brake components. For customers who find these characteristics objectionable, an updated brake caliper assembly and fitting kit is now available as a service part. Follow the Repair Procedures in this bulletin to address this condition.
T-TT-0468-17 Rev
TT: HVAC drain tube is found to be blocked/clogged.
T-TT-0618-20
TT: During the Phase 3 update to add Apple CarPlay® to 2018 model year Camry, Camry HV, and Sienna vehicle head units, if the procedure in the TSBs aren?t followed exactly as written, damage to the head unit may occur. Please take extra precautions when performing these TSBs.
T-TT-0553-19 Rev
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ?Circuit demand is too high for GFCI rating ?Worn out GFCI internal contacts ?Improper installation or wiring of GFCI breaker
T-TT-0552-19 Rev
TT: Repairing a 1234YF HVAC system on a gas powered (non-hybrid) Toyota vehicle may require additional compressor oil to complete the repairs. The various 1234YF compressor oils (ND-12, PS-D1, or VC100YF) are available through the Toyota Approved Dealer Equipment website.
T-SB-0062-20
TSB: Some 2004 ? 2020 model year Hybrid vehicles may exhibit an excessive buildup of dust, lint, or debris in the HV battery intake filter or cooling fan. The condition could reduce the efficiency of the HV battery cooling system. Perform the procedures outlined in this bulletin to address this condition.
T-TT-0615-20 Rev
TT: The Toyota Quality group is looking to better understand our customers expectation regarding vehicle drivability. Specifically, we are looking at vehicle surge/hesitation condition (inconsistent acceleration) and would like to recover detailed customer voice and vehicle data.
T-TT-0615-20
TT: The Toyota Quality group is looking to better understand our customers expectation regarding vehicle drivability. Specifically, we are looking at vehicle surge/hesitation condition (inconsistent acceleration) and would like to recover detailed customer voice and vehicle data.
T-TT-0611-20
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-TT-0516-18_Rev
TT: The microphone circuit passes through the DCM before reaching the radio/navigation system. To simplify the diagnosis of the microphone, Safety Connect SOS button lights, and DCM (Data Communication Module/telematics transceiver) inoperative conditions, refer to the procedure below to prevent unnecessary parts replacement.
T-SB-0041-19 Obs
TSB: OBSOLETE NOTICE May 11, 2020: This bulletin is now obsolete. Please see T-SB-0046-20.
T-SB-0046-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0041-19. The aforementioned bulletin is obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. Some 2018 ? 2019 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1010) or Entune? 3.0 Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation ?Screen freezing ?Intermittent rebooting ?Abnormal clock operation ?Abnormal Apple CarPlay® operation ?Echoing during Apple CarPlay® phone call ?Abnormal Pandora® operation after answering WhatsApp phone call ?Alexa® app inoperative when using iOS devices Some 2018 ? 2019 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1026) or Entune? 3.0 Premium Audio (version 1026, 1031) or earlier may exhibit one or more of the following conditions: ?Intermittent rebooting ?Navigation location inaccurate ?Too many or inconvenient U-turns ?Inaccurate speed categories ?Inaccurate search matches ?Flashing map update screen Some 2018 ? 2019 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1050) or Entune? 3.0 Premium Audio (version 1050) or earlier may exhibit one or more of the following conditions: ?Intermittent rebooting ?Pixelated screen during phone calls when using Apple CarPlay® Some 2018 ? 2019 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? Premium Audio (Navigation version 1030 or 1040) or earlier may exhibit one or more of the following conditions: ?Navigation expiration pop-up that is more than a year in the future ?Destination ETA calculation doesn't account for time zone change or daylight-saving time A software update is now available to addre
T-SB-0044-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0055-19. Service Bulletin No T-SB-0055-19 is obsolete and any printed versions should be discarded. The procedure in this Service Bulletin is a full reformat of the multimedia system. Failure to follow the procedure exactly as written may cause damage to the head unit. This reformatting changes the system from a Phase 2 to a Phase 3 system, which includes Apple CarPlay® and Amazon Alexa?. The reformat requires all linked files and folders extracted from the zip file to be placed onto the root directory of the USB flash drive, otherwise damage to the head unit will occur.
T-SB-0055-19 Obs
TSB: OBSOLETE NOTICE May 01, 2020: This bulletin is now obsolete. Please see T-SB-0044-20.
T-TT-0537-19_Rev
TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments.
T-SB-0033-20
TSB: Some 2018 model year Camry Hybrid vehicles may experience sensitive brakes when driving at slow speeds after the engine has been off for two minutes or longer. Customers may describe the brakes as "grabby" or "touchy" when backing out of or pulling into a parking spot. The VSC/ABS/ECB ECU logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition by installing a calibration software update.
T-SB-0304-17 Obs
TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
T-SB-0032-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-SB-0041-19_Rev
TSB: Some 2018 ? 2019 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1010) or Entune? 3.0 Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation ?Screen freezing ?Intermittent rebooting ?Abnormal clock operation ?Abnormal Apple CarPlay® operation ?Echoing during Apple CarPlay® phone call ?Abnormal Pandora® operation after answering WhatsApp phone call ?Alexa® app inoperative when using iOS devices Some 2018 ? 2019 Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1026) or Entune? 3.0 Premium Audio (version 1026, 1031) or earlier may exhibit one or more of the following conditions: ?Intermittent rebooting ?Navigation location inaccurate ?Too many or inconvenient U-turns ?Inaccurate speed categories ?Inaccurate search matches ?Flashing map update screen Some 2018 ? 2019 Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1050) or Entune? 3.0 Premium Audio (version 1050) or earlier may exhibit one or more of the following conditions: ?Intermittent rebooting ?Pixelated screen during phone calls when using Apple CarPlay® A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-TT-0603-20
TT: For proper calibration of the millimeter wave radar sensor, the vehicle must be on a level surface. If a level surface is not available, this tech tip should be used in conjunction with the repair manual to set the angle of the front millimeter wave radar sensor and reflector height before performing beam axis adjustment.
T-SB-0052-18_Rev
Some 2018 model year Camry, Camry Hybrid, and Sienna Japan-produced vehicles equipped with Entune? 3.0 Audio (version 1000) or earlier may exhibit one or both of the following conditions: ?Bluetooth® continuously connects and disconnects ?Inoperative Entune? voice recognition Some 2018 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio (version 1021) or earlier may exhibit one or more of the following conditions: ?Unable to update radio ?Software Information screen displays in French ?Phone Number Favorites missing from Home screen ?Intermittent radio freezing ?Terms of Service has garbled characters ?Incorrect Entune? application is recommended for installation on the phone after Bluetooth® pairing ?Certain apps disappear when reordered Some 2018 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio (version 1022) or earlier may exhibit one or more of the following conditions: ?Intermittent ?There Are No Applications Available? pop-up ?Incoming voice is muted during phone call?Cancel button inoperative while downloading apps ?Voice recognition for iPod is inoperative after adding playlist to device ?Intermittent Bluetooth audio connection ?Software version does not update if the IG is turned off during software update ?Apps version is not displayed ?USB screen is not available ?Update history shows UTC date rather than time-zone-corrected date ?Update history is temporarily not displayed ?Abnormal voice recognition operation during hands-free phone call ?Incorrect phone book sorting ?Difficult to read the DCM status when dark theme selected ?Entune? update pop-up appears after downloading and installing Entune? A software update is now available to address these conditions, while providing other functional and security enhancements.
T-SB-0152-19_Rev
TSB: Some 2018 ? 2019 model year Camry vehicles with an A25A engine may exhibit a hesitation on acceleration from a slow roll or rolling stop under the following conditions. ?Driving 6 mph or below ?Immediately following a 3 ? 1 downshift ?Less than 40% accelerator pedal application The Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been modified to reduce the potential for hesitation. Follow the Repair Procedure in this bulletin to update the ECM calibration.
T-SB-0016-20
TSB: Some 2018 ? 2020 model year North American Produced (NAP) Camry, 2018 ? 2019 model year Japan produced Camry, 2018 ? 2020 model year Camry hybrid, 2019 ? 2020 model year Avalon, and 2019 ? 2020 model year Avalon hybrid vehicles may exhibit a condition in which the fuel filler door is difficult to open when the release button is pressed. This may be caused by the fuel filler door spring not having sufficient stroke to push the fuel filler door to the open position. The fuel filler door spring has been updated. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0015-20
TSB: Some 2018 ? 2020 model year Camry and Camry Hybrid vehicles may exhibit a brake squeal/squeak noise from the front brake components. For customers who find these characteristics objectionable, an updated brake caliper assembly and fitting kit is now available as a service part. Follow the Repair Procedures in this bulletin to address this condition.
T-TT-0594-20_Rev
TT: Some vehicles equipped with Dynamic Navigation may experience a pop-up message notifying them that their map update service will end soon. The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle, and is only informing the user of the expiration date.
T-SB-0008-20
TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
T-TT-0580-19_Rev
TT: Currently under investigation. Please contact TAS if you have a vehicle that exhibits a leak from the Transmission Side Cover with no signs of damage or other conditions unrelated to regardless of miles or months in service. If it?s a Sunday or holiday continue with diagnosis and repair, save all parts and details, contact TAS on the next available work day and review details with TAS engineer.
T-TT-0520-19_Rev
TT: In certain cases of leaking air conditioning systems, the root cause of the leak is inadvertently overlooked, causing a repeat repair. To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.
T-SB-0005-20
TSB: Some 2018 ? 2020 model year Camry and Camry Hybrid vehicles may exhibit one or more of the following conditions: ? Diagnostic Trouble Code (DTC) C1AAE is displayed. ? A camera malfunction error message is displayed on the Multi-display Unit and/or hood damage from aftermarket parts is exhibited. These conditions may be caused by an aftermarket forward recognition hood also known as a camera heater. Follow the Repair Procedure in this bulletin to address these conditions.
T-TT-0594-20
TT: Some vehicles equipped with Dynamic Navigation may experience a pop-up message notifying them that their map update service will end soon. The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle, and is only informing the user of the expiration date.
T-SB-0047-19_Rev
TSB: REVISION NOTICE December 13, 2019 Rev1: ? Applicability has been updated to include several 2020 model year Toyota vehicles. ? The Required Tools & Equipment section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 ? 2020 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 9) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 3). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
T-SB-0168-19
TSB: Some 2018 ? 2020 model year Camry vehicles may exhibit a Parking Brake Malfunction or Cruise Control Malfunction warning message on the MID (multi-information display) with Diagnostic Trouble Code (DTC) C13B0 (Electric Parking Brake ECU Malfunction) present. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0442-17_Rev
TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active after the initial trial period. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as ?ATX webserver is Down? or ?ATX error? will be displayed.
T-SB-0316-17_Rev
TSB: REVISION NOTICE November 14, 2019 Rev2: ? The Applicability has been updated to include 2019 model year Toyota vehicles. ? The Introduction and Repair Procedure sections have been updated. August 15, 2018 Rev1: ? The Applicability has been updated to include 2018 model year Highlander, Sienna, and Tacoma vehicles. ? The Introduction and Warranty Information sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 ? 2019 model year 2GR-FKS-equipped Camry, 2017 ? 2019 model year Highlander and Sienna, and 2016 ? 2019 model year Tacoma vehicles may exhibit a knocking noise from the vacuum pump with the engine idling. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0580-19
TT: Some 2018-2020 model year UA80/UB80 transmission equipped models may experience a leak from the Transmission Side Cover. This issue is currently under investigation. Vehicles are being sought regardless of months in service or mileage. Only seeking vehicles with leaking transmissions with no other signs of damage to the side cover.
T-TT-0578-19
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-TT-0566-19
TT: Some vehicles may display an error message that displays "New software is not compatible with the system. Contact your dealer." after the Display Control Unit (DCU) or navigation Multimedia Extension Unit (MEU) is replaced if the Phase 3 (CarPlay) retrofit is not applied prior to replacement. Panasonic exchange MEU and DCU parts are now being shipped with Phase 3 software installed.
T-SB-0055-19_Rev
TSB: REVISION NOTICE August 09, 2019 Rev2: ? Step 25 of the Software Update Procedure section has been updated with a Note. May 28, 2019 Rev1: ? The Introduction and Software Update Procedure sections have been updated and the Software Download and Extraction Procedure has been added. Any previous printed versions of this bulletin should be discarded. The procedure in this Service Bulletin is a full reformat of the multimedia system. Failure to follow the procedure exactly as written may cause damage to the head unit. This reformatting changes the system from a Phase 2 to a Phase 3 system, which includes Apple CarPlay® and Amazon Alexa?. The reformat requires all linked files and folders extracted from the zip file to be placed onto the root directory of the USB flash drive, otherwise damage to the head unit will occur. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ.
T-TT-0560-19
TT: Some customers may experience "tightness" when turning the steering wheel. No Power Steering DTCs are recorded.
T-TT-0558-19
TT: In some situations, the Blind Spot Monitor (BSM) Beam Axis may not update during the Blind Spot Monitor Beam Axis Confirmation. The procedure recommended below can be used to confirm the beam axis has been updated when performing the Blind Spot Monitor Beam Axis Confirmation.
T-SB-0131-18_Rev
TSB: REVISION NOTICE August 02, 2019 Rev1: * Applicability has been updated to include 2019 model year Camry and Camry Hybrid vehicles. Any previous printed versions of this bulletin should be discarded. Some 2018 - 2019 model year Camry and Camry Hybrid vehicles with a panoramic roof may exhibit a gap between the interior center garnish panel and roof and/or an interior center garnish panel that is loose. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0553-19
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker
T-SB-0080-19
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0033-14. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0033-14 is obsolete and any printed versions should be discarded. Some 2006 ? 2019 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part. NOTE The ARINIX® Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.
T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-TT-0552-19
TT: When repairing a 1234YF HVAC system on a gas powered (Non-Hybrid) Toyota and the addition of compressor oil is required to complete the repairs, the various 1234YF compressor oils (ND-12, PS-D1, or VC100YF) are available through the Toyota Approved Dealer Equipment website.
T-TT-0551-19
TT: Some customers may experience an Entune? update pop-up message after every key cycle.
T-TT-0549-19
TT: The new 12V Battery Warranty Testers (DSS-5000 & DCA-8000) require certain information to generate a test result and warranty code. Below is an explanation of what information is required when testing a 12V battery on the new Warranty Battery Testers.
T-SB-0020-17_Rev
TSB: REVISION NOTICE May 31, 2019 Rev2: ? Applicability has been updated to include 2019 model year Avalon Hybrid vehicles. ? The entire bulletin has been updated. June 1, 2018 Rev1: ? Applicability has been updated to include 2018 model year Camry Hybrid, Prius, and Prius Prime vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Prius, 2017 ? 2018 model year Prius Prime, 2018 model year Camry Hybrid, and 2019 model year Avalon Hybrid vehicles may exhibit an intermittent condition where it is difficult to refuel. This condition may be caused by the fuel filler door not opening completely, or interference between the fuel filler nozzle splash guard and the fuel door lock switch. If the fuel filler door does not open completely, or if interference occurs, the fuel vapor containment valve may return to a closed position after pressing the fuel door opening button. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0057-19_Rev
TSB: REVISION NOTICE May 24, 2019 Rev1: ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. The procedure in this Service Bulletin is a full reformat of the multimedia system. Failure to follow the procedure exactly as written may cause damage to the head unit. This reformatting changes the system from a Phase 2 to a Phase 3 system, which includes Apple CarPlay® and Amazon Alexa?. This reformat requires all linked files and folders extracted from the zip file to be placed onto the root directory of the USB flash drive, otherwise damage to the head unit will occur. NOTE ? This procedure is a two-part process that includes an automatic file download from the USB flash drive once it is inserted into the USB port. Once the headlight flash step is performed, the system will begin the installation of the downloaded files. ? Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ. NOTICE Failure to follow the Software Update Procedure exactly as written may cause damage to the head unit.
T-TT-0543-19
TT: While performing the retrofit TSB, and creating the USB stick, it is critical that all files that are included in the .zip folder are extracted in the root directory (not in any folders) of the USB drive.
T-SB-0055-19
TSB: Entune? 3.0 Audio is now available with additional features such as Apple CarPlay® and Amazon Alexa? for 2018 model year Camry, Camry Hybrid, and Sienna vehicles. Follow the Software Update Procedure in this bulletin to install these new features. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ.
T-SB-0057-19
TSB: Entune? 3.0 Premium Audio is now available with additional features such as Apple CarPlay® and Amazon Alexa? for 2018 model year Camry, Camry Hybrid, and Sienna vehicles. Follow the Software Update Procedure in this bulletin to install these new features. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ. NOTICE Failure to follow the Software Update Procedure exactly as written may cause damage to the head unit.
T-SB-0047-19
TSB: Some 2018 ? 2019 model year Toyota vehicles equipped with the Entune? 3.0 Premium Audio Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 9), and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 2). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update. NOTE Map data is released once each year through the shipment of an SST USB flash drive to each dealer. The SST MUST be stored in the SST cabinet to ensure it can be easily found
T-TT-0537-19
TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments.
J0R_Dealer Email
Dealer Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R_Dealer Packa
Dealer Packet: 04/16/2019 ? UIO quantities and production ranges have been updated to reflect added vehicles. The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R_Region Email
Region Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R_Region Lette
Region Letter: 04/16/2019 ? UIO quantities and production ranges have been updated to reflect added vehicles. ? Op codes to cover specific instances of ICS ECU failure during reprogramming have been included. The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R_Clearance Wa
Technical Instructions: Update 4/9/2019: Note added on p. 5. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN J0R INTELLIGENT CLEARANCE SONAR (ICS) SYSTEM REPROGRAM CERTAIN: 2018 CAMRY & CAMRY HYBRID 2016 ? 2018 PRIUS 2017 - 2018 PRIUS PRIME
K0A_Sienna Camry
Technical Instructions: Update 4/5/2019: Note added on p. 6. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN K0A ENGINE ECU SOFTWARE UPDATE CERTAIN 2018 CAMRY & 2018 SIEN
H0T_Camry Wheel
Technical Instructions: HOT Expired on March 31, 2019 TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN HOT REAR WHEEL ARCH SEALER GAP CERTAIN 2018 CAMRY
H0T_Dealer Packa
Dealer Package: April 1, 2019 ?A watermark has been added to the Dealer Letter to indicate that H0T expired on March 31, 2019.
TSR-SC-032819
Technician Certification Requirements.
Lever 3000 Load
Common portion of a presentation provided to mutiple OEM customers concerning a potential issue and investigation involving a seat adjustment recliner mechanism.
K0A_Dealer Lette
Dealer Letter: The engine ECUs in the subject vehicles are equipped with software to monitor the rear oxygen sensors. Under a specific condition, this software may not detect a malfunctioning sensor due to an error in the software. As a result, affected vehicles do not meet certain onboard diagnostic (OBD) regulations.
T-SB-0022-19
TSB: Some 2018 model year Camry and Camry Hybrid vehicles and 2019 model year Avalon and Avalon Hybrid vehicles may exhibit a brake squeal/squeak noise from the front brake components. For customers who find these characteristics objectionable, an updated brake caliper is now available as a service part.
T-SB-0020-19
TSB: Some 2018 model year Camry and Camry Hybrid and 2019 model year Avalon and Avalon Hybrid vehicles may exhibit decreased front windshield defroster performance at extremely low ambient temperatures. This condition may be the result of the fresh/recirculation servo actuator separating from the servo. This condition does not affect the airflow of the defroster. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0414-16-Rev
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-TT-0468-17-Rev
TT: HVAC drain tube is found to be blocked/clogged.
T-TT-0511-18-Rev
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
T-SB-0019-19
TSB: This bulletin details the supplemental procedure to confirm Telematics Data Communication Module (DCM) activation for applicable 2017 ? 2019 model year Toyota vehicles after the process is initiated by Techstream. The steps outlined in this bulletin include: ? Techstream Messages ? DCM Activation Confirmation ? Vehicle Confirmation
T-SB-0044-16_Rev
TSB: REVISION NOTICE February 7, 2019 Rev2: * Applicability has been updated to include 2010 - 2014 model year Matrix, 2017 - 2019 model year C-HR, 2019 model year Corolla Hatchback, and 2018 - 2019 model year Toyota vehicles. G418 The Introduction and Repair Procedure sections have been updated. March 7, 2017 Rev1: * Applicability has been updated to include 2017 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0040-08. * Applicability has been updated to include applicable 2016 model year vehicles. Service Bulletin No. T-SB-0040-08 is obsolete and any printed versions should be discarded. Some 2010 - 2019 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0071-18_Rev
TSB: REVISION NOTICE February 7, 2018 Rev1: ? Applicability has been updated to include 2019 model year Avalon vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 model year Camry and 2019 model year Avalon vehicles equipped with 2GR-FKS (V6) engines may exhibit a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs). ? P030000 (Random/Multiple Cylinder Misfire Detected) ? P030027 (Random/Multiple Cylinder Misfire Detected [Emission] Signal Rate of Change Above Threshold) ? P030085 (Random/Multiple Cylinder Misfire Detected [Over Temperature] Signal Above Allowable Range) ? P030500 (Cylinder 5 Misfire Detected) ? P030600 (Cylinder 6 Misfire Detected) ? P160500 (Rough Idling) Common characteristics when the misfire occurs are: ? High engine speed (5000 ? 6500 rpm) ? High engine load (100%+) ? Accelerator pedal position at 100% The Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0013-19
TSB: Some 2016 - 2018 model year Prius and Tacoma, 2017 - 2018 model year Prius Prime and Sienna, and 2018 model year Camry and Camry Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P261093 (ECM/PCM Engine Off Timer Performance No Operation) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0521-19
TT: The current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. To avoid this condition, technicians should raise engine RPM when changing back and forth between the Direct Injection and Port Injection active tests. Use the recommended procedure below to avoid this concern while testing injection mode of FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
T-TT-0520-19
TT: In certain cases of leaking air conditioning systems, the root cause of the leak is inadvertently overlooked, causing a repeat repair. To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.
T-TT-0515-18
TT: When adjusting the Forward Recognition Camera on vehicles with Toyota Safety Sense, it can be difficult to print the repair manual target to the proper size.
J0R-Dealer Packe
Dealer Packet: 11/26/2018 ? Owner Notification section has been updated. ? CAL ID clarification has been provided in the Op Code section. The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R_Dealer Daily
Dealer Daily Message: In our continuing effort to encourage increased customer participation in Special Service Campaigns, Toyota will be piloting a new method for contacting customers whose vehicles have compatible multimedia head units in Special Service Campaign J0R. This new method will leverage the Notification application in vehicles with these head units. See images below for examples of the messages that customers will receive.
T-SB-0285-17_Obs
TSB: OBSOLETE NOTICE November 09, 2018: This bulletin is now obsolete. Please see T-SB-0133-18.
T-SB-0010-18_Rev
TSB: REVISION NOTICE November 15, 2018 Rev1: ? The Production Change Confirmation Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2018 model year Camry vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle.
T-SB-0069-18_Rev
TSB: REVISION NOTICE November 14, 2018 Rev1: ? Applicability has been updated to include 2018 model year Camry and Camry HV vehicles. ? The Repair Procedure section has been updated to include the removal/discarding of the resin spacers. Any previous printed versions of this bulletin should be discarded. Some 2018 model year Camry and Camry Hybrid vehicles with a sliding roof may exhibit a creak or squeak noise from the roof area while driving on uneven surfaces. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0133-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0285-17. ? Applicability has been updated to include 2019 model year Camry and Camry Hybrid vehicles and 2018 ? 2019 model year Mirai and Sienna vehicles. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0285-17 is obsolete and any printed versions should be discarded. Some 2018 model year Camry and Camry Hybrid vehicles equipped with Entune? 3.0 Audio Plus (version 1004 or earlier) or Entune? 3.0 Premium Audio (version 1000 or earlier) may exhibit one or more of the following conditions: ? Abnormal display operation in the destination screen after ?IG-ON? ? Abnormal turn-by-turn direction operation ? Inaccurate traffic information displays ? Abnormal navigation routing ? Abnormal destination and ETA operation while navigation is operating ? Abnormal rerouting operation ? Abnormal navigation operation after ?IG-OFF/ON? cycle ? Navigation will not avoid areas that have been set to avoid ? Intermittent rebooting ? Navigation will not set from Destination Assist Navigation will intermittently not boot up after ?IG-ON? ? Abnormal operation when selecting unplayable songs from the USB flash drive ? Abnormal screen appearance ? Abnormal music browsing when manually browsing music ? Apps take a long time to load ? Abnormal shuffle function when listening to iPhone ? Voice output for temperature is incorrect unit ? Rebooting when connecting an Apple® device with more than 501 podcasts ? Abnormal brightness of Entune? apps ? Voice recognition inoperative ? Delay after answering a phone call ? Incoming call continues to ring (unable to answer or decline)
T-TT-0512-18
TT: On 2018-2019 model year Camry and 2019 model year Avalon, equipped with the 2GR-FKS engine, technicians may observe that the bank 1 (rear) exhaust manifold may be ?missing? a stud and nut. The repair manual shows that, as per design intent, the exhaust manifold is NOT missing a stud and nut.
T-TT-0511-18
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
J0R-Dealer Daily
Dealer Daily Message: Intelligent Clearance Sonar (ICS) System Reprogram ? Special Service Campaign J0R Dealer Letter and Technical Instructions now available on TIS.
J0R-Dealer Email
Dealer Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R-Dealer Packa
Dealer Package: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R-Region Email
Region Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R-Region Lette
Region Letter: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R-Technical In
Technical Instructions: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN J0R INTELLIGENT CLEARANCE SONAR (ICS) SYSTEM REPROGRAM CERTAIN: 2018 CAMRY & CAMRY HYBRID 2016 ? 2018 PRIUS 2017 - 2018 PRIUS PRIME
Lexus Safety Rec
Safety Recall and Service Campaign - Technician Certification Requirements
T-SB-0131-18
TSB: Some 2018 model year Camry and Camry Hybrid vehicles with a panoramic roof may exhibit a gap between the interior center garnish panel and roof and/or an interior center garnish panel that is loose. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0129-18
TSB: Some 2018 ?? 2019 model year Camry and Camry Hybrid vehicles with brushed aluminum or gray metallic trim may exhibit a condition where the instrument panel LH and RH outside register assemblies reflect upon the side window glass. Alternative outside register assemblies with a gloss black finish have been developed to reduce this condition. Follow the Repair Procedure in this bulletin to reduce this condition.
PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
T-TT-0503-18_Rev
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
T-TT-0503-18
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
T-SB-0316-17 Rev
TSB: REVISION NOTICE August 15, 2018 Rev1: ? The Applicability has been updated to include 2018 model year Highlander, Sienna, and Tacoma vehicles. ? The Introduction and Warranty Information sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2GR-FKS-equipped Camry (2018 model year), Highlander, Sienna (both 2017 ? 2018 model year), and Tacoma (2016 ? 2018 model year) vehicles may exhibit a knocking noise from the vacuum pump. Follow the Repair Procedure in this bulletin to address this condition.
TT-0445-17-Rev2
TT: Some fuel filler nozzles are equipped with splash guards that may interfere with the fuel filler door switch. The fuel filler door switch is normally closed by the fuel filler door, which will close the fuel vapor recovery valve.
Technician Certi
Safety Recall and Service Campaign - Technician Certification Requirements
T-SB-0304-17_Rev
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
T-SB-0071-18
TSB: Some 2018 model year Camry vehicles equipped with 2GR-FKS (V6) engines may exhibit a MIL ?ON? condition with one or more of the following Diagnostic Trouble Codes (DTCs). ? P030000 (Random/Multiple Cylinder Misfire Detected) ? P030027 (Random/Multiple Cylinder Misfire Detected [Emission] Signal Rate of Change Above Threshold) ? P030085 (Random/Multiple Cylinder Misfire Detected [Over Temperature] Signal Above Allowable Range) ? P030500 (Cylinder 5 Misfire Detected) ? P030600 (Cylinder 6 Misfire Detected) ? P160500 (Rough Idling) Common characteristics when the misfire occurs are: ? High engine speed (5000 ? 6500 rpm) ? High engine load (100%+) ? Accelerator pedal position at 100% The Engine Control Module (ECM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0073-18
TSB: Some 2016 ? 2018 model year Tacoma, 2017 ? 2018 model year Sienna, Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit an engine oil leak from the cam sensor bolt hole(s). Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0293-17_Rev
TSB: REVISION NOTICE July 26, 2018 Rev1: ? The Introduction, Repair Procedure, and Parts Information sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 model year Camry and Camry Hybrid vehicles may exhibit a condition where the audio system volume is low, cannot be changed from level 41, or there is no sound until the vehicle is restarted. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0069-18
TSB: Some 2018 model year Camry and Camry Hybrid vehicles with a sliding roof may exhibit a creak or squeak noise from the roof area while driving on uneven surfaces. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0235-17_Obs
TSB: OBSOLETE NOTICE July 20, 2018: This bulletin is now obsolete. Please see T-SB-0068-18.
T-SB-0068-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0235-17. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0235-17 is obsolete and any printed versions should be discarded. An initialization procedure is required to activate the Entune 3.0, App Suite Connect for Entune 3.0, Audio Entune 3.0 , Audio Plus, and Entune 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. A Wi-Fi connection is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 app onto the smartphone. Following the initialization procedure, individual Entune 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.
T-SB-0052-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0274-17. * The entire bulletin has been updated. Service Bulletin No. T-SB-0274-17 is obsolete and any printed versions should be discarded. Some Japan-produced 2018 model year Camry and Camry HV vehicles equipped with Entune 3.0 Audio (version 1000) or earlier may exhibit one or both of the following conditions: * Bluetooth® continuously connects and disconnects * Inoperative Entune voice recognition Some 2018 model year Camry and Camry HV vehicles equipped with Entune 3.0 Audio (version 1021) or earlier may exhibit one or more of the following conditions: * Unable to update radio * Software Information screen displays in French * Phone Number Favorites missing from Home screen * Intermittent radio freezing * Software enhancements * Terms of Service has garbled characters * Incorrect Entune application is recommended for installation on the phone after Bluetooth® pairing * Certain apps disappear when reordered A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-SB-0274-17_Obs
TSB: OBSOLETE NOTICE June 22, 2018: This bulletin is now obsolete. Please see T-SB-0052-18.
T-SB-0050-18
TSB: Some 2018 model year Camry and Camry HV vehicles equipped with Blind Spot Monitor (BSM) may exhibit a BSM outer mirror indicator that stays on without a vehicle in the detection area, after being passed by another vehicle. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0042-18
TSB: Some 2018 model year Camry and Camry plug-in hybrid vehicles may exhibit a condition where there is a musty odor or wetness in the RH front floor area of the cabin. This condition may be caused by water entry on the RH front side of the vehicle. Follow the procedure in this bulletin to address this condition.
T-SB-0220-17_Rev
TSB: REVISION NOTICE June 1, 2018 Rev1: ? Applicability has been updated to include 2018 model year Camry HV, Prius, and Prius Prime vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Prius, 2017 ? 2018 model year Prius Prime, and 2018 model year Camry HV vehicles may exhibit an intermittent condition where it is difficult to refuel. This condition may be caused by the fuel filler door not opening completely, or interference between the fuel filler nozzle splash guard and the fuel door lock switch. If the fuel filler door does not open completely, or if interference occurs, the fuel vapor containment valve may return to a closed position after pressing the fuel door opening button. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0197-17_Rev
TSB: REVISION NOTICE May 22, 2018 Rev2: * The Before Delivery section has been updated. May 08, 2018 Rev1: * Applicability has been updated to include 2019 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE - BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position with the auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.
T-SB-0285-17_Rev
TSB: REVISION NOTICE May 21, 2018 Rev2: * The entire bulletin has been updated. January 19, 2018 Rev1: * The Introduction, Software Update Information, and Software Update Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 model year Camry and Camry HV vehicles equipped with Entune 3.0 Audio Plus (version 1004 or earlier) or Entune 3.0 Premium Audio (version 1000 or earlier) may exhibit one or more of the following conditions: * Abnormal display operation in the destination screen after "IG-ON" * Abnormal turn-by-turn direction operation * Inaccurate traffic information displays * Abnormal navigation routing * Abnormal destination and ETA operation while navigation is operating * Abnormal rerouting operation * Abnormal navigation operation after "IG-OFF/ON" cycle * Navigation will not avoid areas that have been set to avoid * Intermittent rebooting * Navigation will not set from Destination Assist * Navigation will intermittently not boot up after "IG-ON" * Abnormal operation when selecting unplayable songs from the USB flash drive * Abnormal screen appearance * Abnormal music browsing when manually browsing music * Apps take a long time to load * Abnormal shuffle function when listening to iPhone * Voice output for temperature is incorrect unit * Rebooting when connecting an Apple® device with more than 501 podcasts * Abnormal brightness of Entune apps * Voice Recognition inoperative * Delay after answering a phone call * Incoming call continues to ring (unable to answer or decline).
T-TT-0498-18
TT: Some customers may experience issues using Entune or Scout functions of the head unit. The following is a diagnostic supplement to assist in understanding how to diagnose this system.
T-TT-0445-17-Rev
TT: Some fuel filler nozzles are equipped with splash guards that may interfere with the fuel filler door switch. The fuel filler door switch is normally closed by the fuel filler door, which will close the fuel vapor recovery valve.
T-SB-0018-18
TSB: Some 2018 model year Camry vehicles equipped with four-cylinder engines may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P07407E (Torque Converter Clutch Actuator Stuck On). The Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) logic has been modified to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0472-17_Rev
TT: Some customers may experience an inoperative Entune Apps Suite and Scout moving maps when connecting an Apple device with iOS version 11.2.1 - 11.2.5 via USB tethering.
T-SB-0016-18
TSB: Some 2016 ? 2017 model year Tacoma, 2017 model year Sienna and Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit a chirping noise from the high-pressure fuel pump. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0274-17_Rev
TSB: REVISION NOTICE February 19, 2018 Rev2: ? The Software Update Procedure section has been updated. January 4, 2018 Rev1: ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some Japan-produced 2018 model year Camry and Camry HV vehicles equipped with Entune? 3.0 Audio (version 1000) or earlier may exhibit one or both of the following conditions: ? Bluetooth continuously connects and disconnects ? Inoperative Entune? voice recognition Some 2018 model year Camry and Camry HV vehicles equipped with Entune? 3.0 Audio (version 1001) or earlier may exhibit one or more of the following conditions: ? Unable to update radio ? Software Information screen displays in French ? Phone Number Favorites missing from Home screen ? Intermittent radio freezing ? Terms of Service has garbled characters ? Incorrect Entune? application is recommended for installation on the phone after Bluetooth pairing ? Certain apps disappear when reordered A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-SB-0015-18
TSB: Some 2018 model year Camry, Camry HV, and Sienna vehicles may exhibit Bluetooth® connectivity conditions with the multimedia system. This Service Bulletin is a diagnostic supplement to help determine the cause of the Bluetooth® connectivity conditions.
T-SB-0235-17_Rev
TSB: REVISION NOTICE February 16, 2018 Rev2: ? Applicability has been updated to include 2018 model year Mirai and Camry HV vehicles. ? The Introduction and Initialization/Update Procedure sections have been updated. ? Instructions for adding a Safety Connect static cling to applicable vehicles have been added. July 20, 2017 Rev1: ? Applicability has been updated to exclude 2018 model year Avalon vehicles. ? The Initialization/Update Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. An initialization procedure is required to activate the Entune? App Suite Connect for Entune? 3.0 Audio, Entune? 3.0 Audio Plus, and Entune? 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Following the initialization procedure, individual Entune? apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.
T-TT-0420-16_Rev
TT: Techstream cannot perform a DCM (Telematics ECU) Activation following a DCM replacement. Techstream may exhibit an ?ATX web service unavailable? error or similar message when attempting a DCM activation. This is a known condition and will be remedied in the near future.
T-SB-0187-12_Rev
TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum.
T-SB-0009-18
TSB: The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather and synthetic leather care in Toyota vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care.
T-SB-0010-18
TSB: When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2018 model year Camry vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle. NOTICE Mismatched transaxle assembly hardware and ECM (PCM) software combinations may result in a harsh shift or shift flare. If this occurs after the original repair, additional ECM (PCM) replacement and reprogramming will be required. This additional ECM (PCM) replacement/reprogramming is NOT covered under warranty. Use the information in this Service Bulletin to confirm that the correct ECM (PCM) hardware and software are used based on the transaxle assembly part number and serial number.
T-SB-0133-18_Rev
TSB: REVISION NOTICE January 18, 2019 Rev1: ? Applicability has been updated to exclude 2019 model year vehicles. ? The Introduction section has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0285-17. ? Applicability has been updated to include 2019 model year Camry and Camry Hybrid vehicles and 2018 ? 2019 model year Mirai and Sienna vehicles. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0285-17 is obsolete and any printed versions should be discarded. Some 2018 model year Camry and Camry Hybrid vehicles equipped with Entune? 3.0 Audio Plus (version 1004 or earlier) or Entune? 3.0 Premium Audio (version 1000 or earlier) may exhibit one or more of the following conditions: ? Abnormal display operation in the destination screen after ?IG-ON? ? Abnormal turn-by-turn direction operation ? Inaccurate traffic information displays ? Abnormal navigation routing ? Abnormal destination and ETA operation while navigation is operating ? Abnormal rerouting operation ? Abnormal navigation operation after ?IG-OFF/ON? cycle ? Navigation will not avoid areas that have been set to avoid ? Intermittent rebooting ? Navigation will not set from Destination Assist ? Navigation will intermittently not boot up after ?IG-ON? ? Abnormal operation when selecting unplayable songs from the USB flash drive ? Abnormal screen appearance ? Abnormal music browsing when manually browsing music ? Apps take a long time to load ? Abnormal shuffle function when listening to iPhone ? Voice output for temperature is incorrect unit ? Rebooting when connecting an Apple® device with more than 501 podcasts ? Abnormal brightness of Entune? apps ? Voice recognition inoperative ? Delay after answering a phone call ? Incoming call continues to ring (unable to answer or decline)
T-TT-0475-18
TT: In the event that injector seal repair is required on vehicles equipped with a direct injection fuel system, a Special Service Tool Set is required to properly install the seal onto the injector. As new vehicle configurations have been released, several injector seal tool sets have been distributed to accommodate these new vehicles. There are a total of three injector seal tool sets for Toyota models, located in the appropriate SST cabinets. Each kit contains multiple pieces as shown in the diagram below. The individual pieces must remain together to ensure these tools are used correctly. Refer to the repair manual for the tool information to ensure the correct tool is used for the desired application.
H0X_Toyota Safet
Safety Recall and Service Campaign - Technician Certification Requirements.
T-TT-0474-18
TT: For some repairs on 2017-2018 Sienna and Highlander and 2018 Camry vehicles equipped with the 8-speed transmission, it is necessary to determine transmission serial number and understand production date.
T-SB-0233-17_Rev
TSB: REVISION NOTICE January 4, 2018 Rev2: ? Applicability has been updated to exclude 2018 model year Sienna vehicles. ? The Repair Procedure section has been updated. NOTE This Service Bulletin ONLY applies to 2018 model year Camry vehicles equipped with Service Connect and Entune? 3.0 Audio Plus or Entune? 3.0 Premium Audio. These vehicles can be identified by the presence of an SOS button on the overhead console. When a maintenance alert occurs, a message displays on the head unit with the Call Dealer button. It is important to program the dealer contact information into the head unit to ensure that the customer can schedule service. Use the procedure in this bulletin to input the dealer contact information for 2018 model year Camry vehicles equipped with Entune? 3.0 Audio Plus or Entune? 3.0 Premium Audio.
T-TT-0472-17
TT: Some customers may experience an inoperative Entune Apps Suite after connecting an Apple device with iOS version 11-2 or later via USB tethering.
T-TT-0469-17
TT: After the DCM (Data Communication Module) has been replaced, Toyota Entune Remote is unable to remote unlock/lock the doors or remote start the vehicle.
TSR-1212-17
Technician Certification Requirements.
T-SB-0330-17
Shift shock on initial start-up or reaccelertation.
T-SB-0323-17
TSB: Some 2018 model year Camry vehicles equipped with four-cylinder engines may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P26CB71 (Electric Water Pump Speed Stuck). The Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) logic has been modified to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0322-17
TSB: Some 2018 model year Camry and Camry HV vehicles may exhibit a condition where the incoming caller will hear an echo during a Bluetooth call through the head unit. This applies to Panasonic head units equipped with JBL. Updated head units are available through the exchange program to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0467-17
TT: While performing T-SB-0274-17, some vehicles may not accept the software update. To verify the current software version and to see if the head unit needs to be updated, please see the recommendations below.
T-SB-0229-12_Rev
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
T-SB-0316-17
TSB: Some 2016 ? 2017 model year Tacoma, 2017 model year Sienna and Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump. Follow the Repair Procedure below to address this condition.
T-SB-0203-17-Rev
TSB: Camry/Camry HV 2018 Pre-Delivery Service Check Sheet.
T-SB-0204-17_Rev
TSB: REVISION NOTICE November 14, 2017 Rev2: ? The Warranty Information, Before Inspection, and Road Test sections have been updated. July 11, 2017 Rev1: ? The Warranty Information and Before Inspection sections have been updated. Any previous printed versions of this bulletin should be discarded. Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ? Careful inspection for paint chips/scratches and body dents/dings. ? Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ? Proper function of mechanical systems. A new PDS Check Sheet has been developed for the 2018 model year Camry/Camry HV. Some check points have been added, expanded, or clarified. Bulletins are available for items in bold type.
T-SB-0313-17
TSB: Some 2015 ? 2018 model year Toyota vehicles may exhibit brake vibration due to improper lug nut torque. Brake vibration can occur at any time if improper torque is applied to lug nuts. Even one lug nut over or under torqued can cause vibration.
T-SB-0134-16_Rev
TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU's information.
T-TT-0460-17
TT: Some customers may experience a pop-up message while driving that will prompt them that an Entune? update is required. This is NOT the same update that is found in the Software Update TSB.
T-SB-0304-17
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
H0T_Dealer Email
Dealer Email: In the subject vehicles, the inner portion of the right rear fender arch may have an improper sealer application. In these vehicles, water and salt may enter and cause rust spots, paint blistering, or perforation of the rear fender arch. This condition is most likely to occur in areas with heavy road salt application.
H0T_Dealer Lette
Dealer Letter: In the subject vehicles, the inner portion of the right rear fender arch may have an improper sealer application. In these vehicles, water and salt may enter and cause rust spots, paint blistering, or perforation of the rear fender arch. This condition is most likely to occur in areas with heavy road salt application.
H0T_Region Email
Region Email: In the subject vehicles, the inner portion of the right rear fender arch may have an improper sealer application. In these vehicles, water and salt may enter and cause rust spots, paint blistering, or perforation of the rear fender arch. This condition is most likely to occur in areas with heavy road salt application.
H0T_Region Lette
Region Letter: In the subject vehicles, the inner portion of the right rear fender arch may have an improper sealer application. In these vehicles, water and salt may enter and cause rust spots, paint blistering, or perforation of the rear fender arch. This condition is most likely to occur in areas with heavy road salt application.
H0T_Technical In
TI: Technical Instructions for Limited Service Campaign H0T, Rear Wheel Arch Sealer Gap Certain 2018 Camry.
T-SB-0293-17
TSB: Some 2018 model year Camry and Camry HV vehicles may exhibit a condition where the volume cannot be changed from level 41 in any mode or intermittently there is no sound until the vehicle is restarted.
T-SB-0285-17
TSB: Some 2018 model year Camry and Camry HV vehicles equipped with Entune? 3.0 Audio Plus (version 1004 or earlier) or Entune? 3.0 Premium Audio (version 1000 or earlier) may exhibit one or more of the following conditions: ? Abnormal display operation in the destination screen after ?IG-ON? ? Abnormal turn-by-turn direction operation ? Inaccurate traffic information displayed ? Abnormal navigation routing ? Abnormal destination and ETA operation while navigation is operating ? Abnormal rerouting operation ? Abnormal navigation operation after ?IG-OFF/ON? cycle ? Navigation will not avoid areas that have been set to avoid ? Intermittent rebooting ? Navigation will not set from Destination Assist ? Navigation will intermittently not boot up after ?IG-ON? ? Abnormal operation when selecting unplayable songs from USB drive ? Abnormal screen appearance ? Abnormal music browsing when manually browsing music ? Apps take a long time to load ? Abnormal shuffle function when listening to iPhone ? Voice output for temperature is incorrect unit ? Rebooting when connecting an Apple® device with more than 501 podcasts ? Abnormal brightness of Entune? Apps ? Voice Recognition inoperative ? Delay after answering a phone call ? Incoming call continues to ring (unable to answer or decline). A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-SB-0274-17
TSB: Some Japan produced 2018 model year Camry and Camry HV vehicles equipped with Entune? 3.0 Audio (version 1000) or earlier may experience one or both of the following conditions: ? Bluetooth continuously connects and disconnects ? EntuneTM Apps Voice Recognition is inoperative A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-TT-0450-17
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-TT-0451-17
TT: Some customers may experience greyed out buttons or inactive screens (lockouts) while driving. This is to promote safe driving practices and reduce the amount of distractions while driving. These lockouts cannot be deactivated or defeated through any settings.
T-SB-0218-17_Rev
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.
T-SB-0203-17_Rev
2018 Pre-Delivery Service Check Sheet
T-SB-0235-17
TSB: An initialization procedure is required to activate the Entune App Suite Connect for Entune 3.0 Audio, Entune 3.0 Audio Plus and Entune 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also need to be performed under other circumstances, such as following a head unit replacement or after the customer's personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed and other factors.
T-SB-0233-17
TSB: When a maintenance alert occurs, a message displays on the head unit with the "Call Dealer" button. It is important to program the dealer contact information into the head unit to ensure that the customer can schedule service.
T-TT-0442-17
TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.
T-TT-0441-17
TT: During previous air conditioning service, leakage prevention agent (A/C stop leak) may have been added to the A/C system. Adding stop leak products to the A/C system is not a recommended or approved Toyota repair process. During A/C service, moisture enters the A/C system, and can react with the previously added A/C stop leak, forming a gelatinous substance. The gel substance that forms can cause the A/C compressor to bind and or seize.
T-TT-0432-17_Rev
TT: Rev2 Some Customers may complain about a Hybrid Vehicle Battery cooling system warning message. This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet. Refer to the information below to address this issue.
T-SB-0203-17
TSB: 2018 Pre-Delivery Service Check List
T-SB-0204-17
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection of paint chips/scratches and body dents/dings, Proper operation of electrical accessories (including interior light, clock, and radio reset), Interior cleanliness, Proper function of mechanical systems.
T-SB-0197-17
TSB: Hybrid vehicles are equipped with 2 types of batteries: ? Hybrid Vehicles (HV) battery. ? Auxiliary (12V) battery. If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary.
T-SB-0196-17
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle's system and components. Any problems that are found should be corrected immediately.
T-SB-0195-17
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharges and/or failed batteries due to lack of maintenance. It is the dealer's responsibility to maintain the specific State-Of-Charge (SOC) of the vehicle's battery while in stock and assure proper SOC at delivery.
T-SB-0192-17
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the following procedure to ensure that the original tires stay in the same location on the vehicle.
T-SB-0188-17
TSB: 2018 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate Installation Procedure to attach the driver?s side, and if applicable the passenger?s side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips during Pre-Delivery Service (PDS).
T-TT-0435-17
TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory.
T-SB-0185-17
TSB: Some 2018 model year vehicles are equipped with a Smart Key system, which allows the customer to enter and start the vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected using the following procedure during Pre-Delivery Service (PDS).
TTT043217 Rev1
TT: Some Customers may complain about a Hybrid Vehicle Battery cooling system warning message. This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet.
TTT043217
TT: Some Customers may complain about a Hybrid Vehicle Battery cooling system warning message. This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet.
Safety Recall an
Update on Technician Certification Requirements.
T-PG007-01
Replacement vin plates.
T-PG002-91
Product general information.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.