T-SB-0104-21 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
Vehicle report
2023 TOYOTA COROLLA
Service bulletins
88 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-SB-0055-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0088-23 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE August 19, 2025: This bulletin is now obsolete. Please see T-SB-0059-25.
T-SB-0059-25
Service Bulletin/Repair Instructions
Some 2020 – 2025 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine’s Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. This condition does not affect the operation of the vehicle.
T-SB-0010-24 Rev2
Service Bulletin/Repair Instructions
Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected
T-SB-0058-23 Rev1
Service Campaign
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-TT-0779-25
Service Bulletin/Repair Instructions
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0029-25
Service Bulletin/Repair Instructions
Some 2023 – 2024 model year Corolla vehicles may exhibit a rattling noise condition from the forward recognition camera cover. The forward recognition camera covers have been modified to address this condition.
T-SB-0107-20 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.
T-SB-0013-24 Rev1
Service Bulletin/Repair Instructions
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
T-SB-0021-25
Service Bulletin/Repair Instructions
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0120-20 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE January 30, 2025: This bulletin is now obsolete. Please see T-SB-0015-25.
T-SB-0015-25
Service Bulletin/Repair Instructions
Some 2021 – 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.
T-SB-0011-25
Service Bulletin/Repair Instructions
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.
T-SB-0111-20 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE January 23, 2025: This bulletin is now obsolete. Please see T-SB-0011-25.
T-SB-0010-24 Rev1
Service Bulletin/Repair Instructions
Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected
T-SB-0035-24 Rev2
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev2
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev2
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0061-23 Rev2
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
T-SB-0062-23 Rev2
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
T-TT-0753-24 Rev1
Service Bulletin/Repair Instructions
Some technicians may report an engine oil leak from the Engine Oil Level Sensor area
T-SB-0098-24
Service Bulletin/Repair Instructions
Some 2022 model year Avalon and Avalon Hybrid, 2022 – 2024 model year Camry, Camry Hybrid, Corolla, Corolla Hatchback, Corolla Hybrid, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid, 2023 – 2024 model year Crown, and 2024 model year Grand Highlander vehicles may exhibit a high-pitched noise coming from the front HVAC blower motor while operating the air conditioner or heater. This condition does not affect the operation of the vehicle, however, a heater cover has been developed to help reduce or potentially eliminate the noise.
T-SB-0062-24 Rev1
Service Bulletin/Repair Instructions
Some 2023 model year RAV4 Prime vehicles with Data Communication Module (DCM) firmware version earlier than LG-N210hh1V1V-09 may exhibit a condition in which the remote climate system is inoperative after the vehicle has been off for three hours or more. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hatchback, Corolla Hybrid, Crown, GR Corolla, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles and 2024 model year Grand Highlander and Grand Highlander Hybrid vehicles with DCM firmware versions earlier than LG-N210jj3333-09, LG-N210nn1212-09, LG-N310kk4646-0I, LG-N310ll4A4A-0I, LG-N310mm8A8A-0I, LG-N310nnBLBM-0I, or LG-N310oo1B1B-0I may exhibit a condition in which remote services are inoperative. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, and Highlander Hybrid vehicles, 2023 – 2024 model year Corolla Hybrid, GR Corolla, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles, 2024 model year Grand Highlander, Grand Highlander Hybrid, and Land Cruiser vehicles; 2023 – 2025 Corolla Hatchback and Crown vehicles, and 2025 Crown Signia vehicles with DCM firmware versions earlier than LG-N210qq####-## or LG-N310qq####-## may exhibit a condition in which Apple Music® or Amazon Music streaming and/or remote services are inoperative. A DCM firmware update is now available.
T-SB-0041-24 Rev1
Service Bulletin/Repair Instructions
OBSOLETE NOTICE September 24, 2024: This bulletin is now obsolete. Please see T-SB-0081-24
T-SB-0081-24
Service Bulletin/Repair Instructions
Some 2023 – 2024 model year Corolla and Corolla Cross vehicles with M20A-FKS engines may exhibit a MIL ON condition with one or both of the following Diagnostic Trouble Codes (DTCs) present: •P11EA00 – (Bank 1 Air-Fuel Ratio Imbalance (Port)) •P013A7C – (A/F Sensor – Rich to Lean Bank 1 Sensor 2 Slow Response) There are no drivability issues or other symptoms associated with this condition.
T-SB-0077-24
Service Bulletin/Repair Instructions
Some 2021 – 2024 model year Corolla, 2022 – 2024 model year Corolla Cross, and 2023 – 2024 model year Corolla Cross Hybrid vehicles with M20A-FKS or M20A-FXS engines may exhibit an oil leak that originates between the oil pan sub-assembly and the stiffening crankcase assembly.
T-SB-0055-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0027-24 Rev1
Service Bulletin/Repair Instructions
OBSOLETE NOTICE July 18, 2024: This bulletin is now obsolete. Please see T-SB-0062-24.
T-SB-0062-24
Service Bulletin/Repair Instructions
Some 2023 model year RAV4 Prime vehicles with Data Communication Module (DCM) firmware version earlier than LG-N210hh1V1V-09 may exhibit a condition in which the remote climate system is inoperative after the vehicle has been off for three hours or more. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hatchback, Corolla Hybrid, Crown, GR Corolla, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles and 2024 model year Grand Highlander, and Grand Highlander Hybrid vehicles with previous versions of DCM firmware (see Table 1 below) may exhibit a condition in which remote services are inoperative. A DCM firmware update is now available to address this condition.
T-SB-0035-24 Rev1
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev1
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev1
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0055-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0103-20 Rev1
Service Bulletin/Repair Instructions
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
24TC03
Service Bulletin/Repair Instructions
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC03 DATA COMMUNICATON MODULE (DCM) UPDATE CERTAIN 2023 COROLLA, COROLLA CROSS, COROLLA HATCHBACK, COROLLA HV, GR COROLLA, CROWN, HIGHLANDER, HIGHLANDER HV, PRIUS, RAV4, RAV4 PRIME, RAV4 HV, VENZA HV
T-SB-0061-23 Rev1
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
T-SB-0062-23 Rev1
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
24TC01
Service Campaign
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC01 BRAKE ACTUATOR ASSEMBLY (SKID CONTROL ECU SOFTWARE UPDATE CERTAIN 2023 MODEL COROLLA
T-SB-0041-24
Service Bulletin/Repair Instructions
Some 2023 – 2024 model year Corolla and Corolla Cross vehicles with M20A-FKS engines may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P11EA00 (Bank 1 Air-Fuel Ratio Imbalance (Port)) present. There are no drivability issues or other symptoms associated with this condition.
T-SB-0035-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
T-SB-0039-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-TT-0754-24
Service Bulletin/Repair Instructions
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
T-TT-0753-24
Service Bulletin/Repair Instructions
Some technicians may report an engine oil leak from the Engine Oil Level Sensor area
T-SB-0088-23
Service Bulletin/Repair Instructions
Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. REVISION NOTICE April 01, 2024 Rev1: •The Warranty Information section has been updated
T-PANT-2024-004-
Service Bulletin/Repair Instructions
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
T-SB-0013-24
Service Bulletin/Repair Instructions
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
TSB010421
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
TTT074423
Service Bulletin/Repair Instructions
TT: Some 2022/2023 Japan built (VIN JTD) Corolla/Corolla HV sedan vehicles may have a rattle noise coming from the headliner.
TTT074323
Service Bulletin/Repair Instructions
TT: MIL On with DTC P045600 Evaporative Emission System Leak Detected (Very Small Leak)
TSB008823
Service Bulletin/Repair Instructions
TSB: Some 2020 ? 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. Follow the Repair Procedure in this bulletin to improve this condition.
23TC01
Service Bulletin/Repair Instructions
DP: The subject vehicles are equipped with Toyota Safety Sense (TSS) which consists of several driving assist features, including pre-collision braking, lane departure warning, and more. Due to inappropriate programming of the software within the forward recognition camera, there is a possibility that under certain conditions, TSS functions could become inoperative for approximately 4 seconds before rebooting and becoming operational again.
23TC01 Dealer Pa
Service Bulletin/Repair Instructions
DP: The subject vehicles are equipped with Toyota Safety Sense (TSS) which consists of several driving assist features, including pre-collision braking, lane departure warning, and more. Due to inappropriate programming of the software within the forward recognition camera, there is a possibility that under certain conditions, TSS functions could become inoperative for approximately 4 seconds before rebooting and becoming operational again.
23TC01 Region Le
Service Bulletin/Repair Instructions
RL: The subject vehicles are equipped with Toyota Safety Sense (TSS) which consists of several driving assist features, including pre-collision braking, lane departure warning, and more. Due to the programming of the software within the forward recognition camera, there is a possibility that under certain conditions, TSS functions could become inoperative for approximately 4 seconds before rebooting and becoming operational again.
23TC01 TI - Publ
Service Bulletin/Repair Instructions
TI: TECHNICAL INSTRUCTIONS FOR 23TC01 TOYOTA SAFETY SENSE INOPERATIVE INTERMITTENTLY
23TC01a
Service Bulletin/Repair Instructions
RL: The subject vehicles are equipped with Toyota Safety Sense (TSS) which consists of several driving assist features, including pre-collision braking, lane departure warning, and more. Due to the programming of the software within the forward recognition camera, there is a possibility that under certain conditions, TSS functions could become inoperative for approximately 4 seconds before rebooting and becoming operational again.
23TC01b
Service Bulletin/Repair Instructions
TI: TECHNICAL INSTRUCTIONS FOR 23TC01 TOYOTA SAFETY SENSE INOPERATIVE INTERMITTENTLY
TSB005823
Service Bulletin/Repair Instructions
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
TSB003220
Service Bulletin/Repair Instructions
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TTT073723
Service Bulletin/Repair Instructions
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
23TC02
Service Bulletin/Repair Instructions
DP: Due to certain programming in the brake ECU, under certain conditions, DTC U0100 is stored and cannot be cleared even though a technician attempts to do so. This condition does not affect the vehicle operation.
23TC02a
Service Bulletin/Repair Instructions
RL: Due to certain programming in the brake ECU, under certain conditions, DTC U0100 is stored and cannot be cleared even though a technician attempts to do so. This condition does not affect the vehicle operation.
T-SB-0107-20
Service Bulletin/Repair Instructions
TSB: Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0042-23
Service Bulletin/Repair Instructions
TSB: Some 2023 ? 2024 model year Toyota vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.
T-TT-0734-23
Service Bulletin/Repair Instructions
TT: When setting up the Toyota Audio Multimedia (21MM) user profile, if the QR code is not working please use the following recommendations.
23TD01 Corolla L
Service Bulletin/Repair Instructions
DP: The front license plate bracket provided with the vehicle has clips that potentially interfere with the lower grille assembly. This interference can make it more difficult to install the front license plate bracket.
T-TT-0731-23
Service Bulletin/Repair Instructions
TT: Some customers may complain of the suspension feeling stiff while driving or going over bumps. Some dealerships may have forgotten to remove the transportation spacer during the PDS process which can result in a stiffer than normal suspension feel.
T-TT-0699-22 Rev
Service Bulletin/Repair Instructions
TT: Some Model Year 2018-2023 vehicles equipped with A25A-FKS/FXS or M20A-FKS/FXS engines may display the following message ?Engine Maintenance Required Visit Your Dealer? on the combination meter
T-SB-0120-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2021 ? 2023 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. Techstream software has been modified to indicate when configuration software is required. A new Configure column has been added to the Techstream Health Check Results screen to show when configuration software is available for a specific ECU. Follow the Operation Procedure in this bulletin to complete the ECU Software Configure Process.
T-SB-0012-23
Service Bulletin/Repair Instructions
TSB: Some 2023 model year bZ4X vehicles with multimedia version 1505 or older; Corolla, Corolla Hybrid, and Corolla Hatchback vehicles with multimedia version 1506 or older; and Crown vehicles with multimedia version 1511 or older may exhibit one or more of the following conditions: ?Head unit rebooting. ?User Profile enhancements. ??Software Update Complete? pop-up message. ?Display screen frozen/non-responsive. ?Navigation items show on non-navigation multimedia system (Mexico market only). ?Newly added phone contact name will not show on display screen. ?Noise during hands-free calls. ?GPS location indicator stays on after map is off. ?Map does not display. ?Route guidance guides to incorrect side. ?App button(s) appear pressed. ?Sonar system display will not update on display screen. ?Back-up camera messages are in English instead of non-English. ?Incorrect HD radio icon color. ?Bluetooth profile version update. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-TT-0678-21 Rev
Service Bulletin/Repair Instructions
TT: Some 19CY LG DCM equipped vehicles may not be able to complete the firmware update due to not having an active account or waived services during the trial. Follow the steps below to enable ?Temp DCM Activation?.
T-SB-0031-22 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE November 28, 2022: This bulletin is now obsolete. Please see T-SB-0105-22
T-SB-0032-22 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE November 28, 2022: This bulletin is now obsolete. Please see T-SB-0104-22.
T-SB-0104-22
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer
T-SB-0105-22
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
T-SB-0029-22 Rev
Service Bulletin/Repair Instructions
TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference
T-SB-0033-22 Rev
Service Bulletin/Repair Instructions
TSB: Hybrid vehicles are equipped with two types of batteries: ?Hybrid vehicle (HV) battery. ?Auxiliary (12V) battery. If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified SOC of the vehicle?s battery while in stock and ensure proper SOC at delivery.
T-SB-0036-22 Rev
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
T-SB-0100-22
Service Bulletin/Repair Instructions
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year Corolla Cross and Corolla Cross Hybrid vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines.
T-SB-0099-22
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year GR Corolla vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines
T-SB-0084-22
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year Corolla, Corolla Hatchback, Corolla Hybrid vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines.
T-SB-0032-22 Rev
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.
T-SB-0031-22 Rev
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle
TTT069522
Service Bulletin/Repair Instructions
TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
T-SB-0036-22
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately
T-SB-0032-22
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.
T-SB-0029-22
Service Bulletin/Repair Instructions
TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.