T-SB-0106-22 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.
Vehicle report
2020 TOYOTA PRIUS PRIME
Service bulletins
100 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-SB-0001-26
Service Bulletin/Repair Instructions
Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
T-SB-0055-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-TT-0784-25 Rev1
Service Bulletin/Repair Instructions
Some ECUs can set a DTC that is common with other ECUs. This can lead to accidental use of the wrong repair manual when diagnosing these type of DTCs.
T-SB-0058-23 Rev1
Service Campaign
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-TT-0784-25
Service Bulletin/Repair Instructions
Some ECUs can set a DTC that is common with other ECUs. This can lead to accidental use of the wrong repair manual when diagnosing these type of DTCs.
T-TT-0780-25
Service Bulletin/Repair Instructions
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0035-24 Rev2
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev2
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev2
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0061-23 Rev2
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
T-SB-0062-23 Rev2
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
T-SB-0055-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0035-24 Rev1
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev1
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev1
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0055-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0061-23 Rev1
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
T-SB-0062-23 Rev1
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
T-SB-0035-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
T-SB-0039-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0016-24 Rev1
Service Bulletin/Repair Instructions
Some 2020 – 2024 Corolla HV, 2017 – 2022 Prius Prime, and 2016 – 2022 Prius vehicles equipped with a 2ZR-FXE engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P210015 (Throttle Actuator "A" Control Motor Circuit Short to Battery or Open), or P210019 (Throttle Actuator "A" Control Motor Circuit Current Above Threshold), or P211172 (Throttle Actuator "A" Control System Actuator Stuck Open) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. REVISION NOTICE April 17, 2024 Rev1: •The Required Tools & Equipment section has been updated.
T-TT-0754-24
Service Bulletin/Repair Instructions
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
T-SB-0016-24
Service Bulletin/Repair Instructions
Some 2020 – 2024 Corolla HV, 2017 – 2022 Prius Prime, and 2016 – 2022 Prius vehicles equipped with a 2ZR-FXE engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P210015 (Throttle Actuator "A" Control Motor Circuit Short to Battery or Open), or P210019 (Throttle Actuator "A" Control Motor Circuit Current Above Threshold), or P211172 (Throttle Actuator "A" Control System Actuator Stuck Open) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition
T-PANT-2024-004-
Service Bulletin/Repair Instructions
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
TSB010622
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
T-PANT-2024-001-
Service Bulletin/Repair Instructions
PANT: Toyota is pleased to announce to all field and dealer personnel that we have launched a new part number to the Toyota Complete Maintenance Care (TCMC) Program, effective February 1, 2024. This new H4 Battery will be phased in over time as inventory levels for the current part number are depleted. Additionally, this new part number will have the same pricing as the current part number and will be drop shipped by an Interstate Battery Distributor.
TSB008523A
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
TSB008523
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
TSB005823
Service Bulletin/Repair Instructions
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
TSB003220
Service Bulletin/Repair Instructions
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TTT073723
Service Bulletin/Repair Instructions
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
T-SB-0057-18
Service Bulletin/Repair Instructions
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
T-TT-0611-20 Rev
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-SB-0106-22
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
T-TT-0703-22
Service Bulletin/Repair Instructions
TT: Vehicles listed above equipped with a Denso Ten radio (Entune Audio Plus or Premium Audio) may exhibit a condition in which the radio screen continues to show a Bluetooth phone call in progress after the call has ended. This condition has been confirmed with multiple Android phones, including Samsung Galaxy S21 and S22, and Google Pixel 6.
T-TT-0701-22
Service Bulletin/Repair Instructions
TT: Mil On. DTC P0AFB11 (Hybrid/EV Battery Current Sensor "A" Circuit Short to Ground), P0ABF15 (Hybrid/EV Battery Current Sensor "A" Circuit Short to Auxiliary Battery or Open), P0ABF28 (Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure), P0AA649 (Hybrid/EV Battery Voltage System Isolation Internal Electronic Failure) or P33CF49 ( Hybrid/EV Battery Voltage System Isolation Internal Electronic Failure Abnormal Area Detection Failure) present for HV Battery Current Sensor/Battery ECU
TSB001221Rev2
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
TSB004522Rev1
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
TTT069522
Service Bulletin/Repair Instructions
TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
TSB014919Rev2
Service Bulletin/Repair Instructions
TSB: Some 2017 ? 2022 model year Prius Prime vehicles may exhibit corrosion on the back door steel reinforcement panel sub-assembly area visible below the opener switch and rear camera.
T-SB-0045-22
Service Bulletin/Repair Instructions
Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now avail
TSB003120Rev2
Service Bulletin/Repair Instructions
TSB: Some 2017 ? 2018 model year Prius Prime vehicles equipped with Premium Audio (R10A5430) or earlier may exhibit one or more of the following conditions. Updated multimedia software is now available to address these conditions. Follow the Multimedia Software Update Procedure in this bulletin to install the latest software version.
TTT063620
Service Bulletin/Repair Instructions
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
T-TT-0687-22
Service Bulletin/Repair Instructions
TT: When customers have a concern about a discharged battery, no start, or general battery concern, the DCA-8000 is the only appropriate tool to use for diagnosis
T-SB-0012-21 Rev
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
T-TT-0578-19 Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-SB-0112-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2020 model year Sienna (XLE, Limited); 2019 model year Avalon, Avalon Hybrid, Corolla Hatchback, Highlander (Platinum only), Highlander Hybrid (Platinum only), RAV4, and RAV4 Hybrid; and 2020 model year Corolla, Corolla Hybrid, Prius (excluding Limited), and Prius Prime (excluding XLE, LTD) vehicles equipped with Safety Connect may exhibit one or more of the following conditions: ?SOS button lights are inoperative. ?Bluetooth® microphone and voice command are inoperative. ?Right front audio speakers are inoperative. ?Connected services are inoperative. ?Remote start is inoperative. A replacement telematics transceiver assembly is now available to address these conditions. Follow the Repair Procedure in this bulletin to address these conditions.
T-TT-0631-20 Rev
Service Bulletin/Repair Instructions
TT: NOTE: This document only applies to certain audio packages for the following vehicles. 2019 C-HR (Audio Plus & Premium Only) 2020 Prius (Audio Only) 2020 Prius Prime (Audio Plus Only) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi Pre-Paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the Pre-Paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi Trial.
T-SB-0080-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
T-SB-0047-20 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE July 09, 2021: This bulletin is now obsolete. Please see T-SB-0051-21.
T-SB-0051-21
Service Bulletin/Repair Instructions
TSB: Some 2019 model year RAV4 and RAV4 Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Toyota apps fail to download. ?Bluetooth® is unable to automatically connect after key cycle. ?Abnormal microphone operation. ?Sirius XM® antenna disconnection history Diagnostic Trouble Code (DTC) B15FE. ?No outgoing voice during phone calls when using Apple CarPlay®. ?Incoming calls incorrectly show on the multi-information display (MID) when using Apple CarPlay®. ?CAN networking DTC B1321. ?Volume inoperative after using Siri®. ?Unable to adjust the treble audio setting. ?Song information flickering. ?Unable to select Sirius XM® music genre by voice recognition. ?Noise when hanging up call on handset. ?Transferred contacts do not match the number of handset contacts. ?Sirius XM® sound slow to start. ?Abnormal Toyota apps and Scout Operation Some 2020 model year Prius and Prius Prime, 2019 model year RAV4 and RAV4 Hybrid, and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1195), Premium Audio (version 1195), or Navigation (version 1035) or earlier may exhibit one or more of the following conditions: ?Unable to play audio source after incoming call. ?Software enhancements. ?Intermittent rebooting. ?Unable to register Bluetooth® devices from Bluetooth® Audio Mode. ?Unable to pair Android? devices after Google? apps update. ?Unable to access camera diagnosis system. ?USB audio does not resume. ?Intermittent Bluetooth® disconnection. ?Abnormal voice recognition operation. ?Phone call history does not update. ?Bluetooth® loses connection after USB connection is made. ?Clock not displayed on the map screen. ?Intermittent phone ringing with no incoming phone call.
Toyota PRO21-UFR
Service Bulletin/Repair Instructions
UPDATES TO THE 2014-2021 TOYOTA UNIVERSAL FLAT RATE MANUAL
Toyota Safety Re
Service Bulletin/Repair Instructions
Toyota Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0636-20 Rev
Service Bulletin/Repair Instructions
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0012-21
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2021 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0149-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2017 ? 2021 model year Prius Prime vehicles may exhibit corrosion on the back door sub-assembly steel reinforcement panel visible below the opener switch and rear camera. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0032-20 Rev
Service Bulletin/Repair Instructions
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-TT-0636-20
Service Bulletin/Repair Instructions
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0047-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2019 model year RAV4 and RAV4 Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Toyota apps fail to download. ?Bluetooth® is unable to automatically connect after key cycle. ?Abnormal microphone operation. ?Sirius XM® antenna disconnection history Diagnostic Trouble Code (DTC) B15FE. ?No outgoing voice during phone calls when using Apple CarPlay®. ?Incoming calls incorrectly show on the multi-information display (MID) when using Apple CarPlay®. ?CAN networking DTC B1321. ?Volume inoperative after using Siri®. ?Unable to adjust the treble audio setting. ?Song information flickering. ?Unable to select Sirius XM® music genre by voice recognition. ?Noise when hanging up call on handset. ?Transferred contacts do not match the number of handset contacts. ?Sirius XM® sound slow to start. ?Abnormal Toyota apps and Scout Operation.
T-SB-0112-20
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2020 model year Sienna (XLE, Limited); 2019 model year Avalon, Avalon Hybrid, Corolla Hatchback, Highlander (Platinum only), Highlander Hybrid (Platinum only), RAV4, and RAV4 Hybrid; and 2020 model year Corolla, Corolla Hybrid, Prius (excluding Limited), and Prius Prime (excluding XLE, LTD) vehicles equipped with Safety Connect may exhibit one or more of the following conditions: ?SOS button lights are inoperative ?Bluetooth® microphone and voice command are inoperative ?Right front audio speakers are inoperative ?Connected services are inoperative ?Remote start is inoperative A replacement telematics transceiver assembly is now available to address these conditions. Follow the Repair Procedure in this bulletin to address these conditions.
T-TT-0631-20
Service Bulletin/Repair Instructions
TT: NOTE: This document only applies to certain audio packages for the following vehicles. 2019 C-HR (Audio Plus & Premium Only) 2020 Prius (Audio Only) 2020 Prius Prime (Audio Plus Only) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi Pre-Paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the Pre-Paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account.
T-TT-0628-20
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to be blocked/clogged.
T-SB-0062-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2004 ? 2020 model year Hybrid vehicles may exhibit an excessive buildup of dust, lint, or debris in the HV battery intake filter or cooling fan. The condition could reduce the efficiency of the HV battery cooling system. Perform the procedures outlined in this bulletin to address this condition.
T-SB-0158-18 Rev
Service Bulletin/Repair Instructions
2020 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.
T-SB-0073-19 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE July 31, 2020: This bulletin is no longer applicable and is now obsolete.
T-TT-0468-17 Rev
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to be blocked/clogged.
T-TT-0553-19 Rev
Service Bulletin/Repair Instructions
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ?Circuit demand is too high for GFCI rating ?Worn out GFCI internal contacts ?Improper installation or wiring of GFCI breaker
T-SB-0062-20
Service Bulletin/Repair Instructions
TSB: Some 2004 ? 2020 model year Hybrid vehicles may exhibit an excessive buildup of dust, lint, or debris in the HV battery intake filter or cooling fan. The condition could reduce the efficiency of the HV battery cooling system. Perform the procedures outlined in this bulletin to address this condition.
T-TT-0613-20
Service Bulletin/Repair Instructions
TT: Unibody vehicles commonly have lashing holes on the under body used for securing the vehicle during logistics -The lashing holes are intended to be plugged during Pre-Delivery Service (PDS) -The plugs are: oRequired for anti-corrosion purposes oUsually located in the glove box prior to PDS -The number of plugs may be different based on model and production location
T-TT-0611-20
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-TT-0516-18_Rev
Service Bulletin/Repair Instructions
TT: The microphone circuit passes through the DCM before reaching the radio/navigation system. To simplify the diagnosis of the microphone, Safety Connect SOS button lights, and DCM (Data Communication Module/telematics transceiver) inoperative conditions, refer to the procedure below to prevent unnecessary parts replacement.
T-SB-0039-19 Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE May 11, 2020: This bulletin is now obsolete. Please see T-SB-0047-20.
T-SB-0047-20
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0039-19. The aforementioned bulletin is obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. Some 2019 model year RAV4, RAV4 Hybrid and some 2018 ? 2020 model year Sienna vehicles equipped Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Toyota Apps fail to download ?Bluetooth® is unable to automatically connect after key cycle ?Abnormal microphone operation ?Sirius XM® antenna disconnection history Diagnostic Trouble Code (DTC) B15FE ?No outgoing voice during phone calls when using Apple CarPlay® ?Incoming calls incorrectly shown on the Multi-information Display (MID) when using Apple CarPlay® ?CAN networking DTC B1321 ?Volume inoperative after using Siri® ?Unable to adjust the treble audio setting ?Song information flickering ?Unable to select Sirius XM® music genre by voice recognition ?Noise when hanging up call on handset ?Transferred contacts do NOT match the number of handset contacts ?Sirius XM® sound slow to start ?Abnormal Toyota Apps and Scout Operation Some 2020 model year Prius, Prius Prime, some 2019 model year RAV4, RAV4 Hybrid, and some 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1195), Premium Audio (version 1195) or Navigation (version 1035) or earlier may exhibit one or more of the following conditions:?Unable to play audio source after incoming call ?Software enhancements ?Intermittent rebooting ?Unable to register Bluetooth® devices from Bluetooth® Audio Mode ?Unable to pair Android? devices after Google? apps update ?Unable to access camera diagnosis system ?USB audio does not resume ?Intermittent Bluetooth® disconnection ?Abnormal voice recognition operation ?Phone call history does not
T-TT-0606-20
Service Bulletin/Repair Instructions
TT: Due to the challenges caused by the COVID-19 virus threat, some dealers are experiencing reduced traffic into their stores and causing dealer stock to age. Due to this situation, dealers are reminded and recommended to follow the Long-Term Vehicle Storage Guidelines outlined in T-SB-0009-19 and other Service Bulletin publications to ensure customers receive their vehicles in a fresh and well maintained condition Please ensure that both Sales and Service at your dealership are aware of these guidelines and are following the recommended maintenance and storage processes and procedures to ensure the highest customer satisfaction with their new vehicle purchase.
T-TT-0537-19_Rev
Service Bulletin/Repair Instructions
TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments.
T-SB-0032-20
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-SB-0009-19_Rev
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
T-SB-0022-20
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2020 model year Toyota vehicles may exhibit naturally occurring odors emitted from the HVAC system and/or related environmental factors. Follow the General Procedure in this bulletin to minimize the odors experienced.
T-SB-0008-19_Rev
Service Bulletin/Repair Instructions
TSB: An initialization procedure is required to activate the Entune? 3.0 App Suite Connect for Audio, Audio Plus, and Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Following the initialization procedure, individual Entune? 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the Initialization/Update Procedure in this bulletin to perform the initialization and app updates.
T-SB-0236-17_Rev
Service Bulletin/Repair Instructions
TSB: Some 2017 ? 2018 model year Prius Prime vehicles equipped with Premium Audio (R10A5430) or earlier may exhibit one or more of the following conditions. Updated multimedia software is now available to address these conditions. Follow the Multimedia Software Update Procedure in this bulletin to install the latest software version.?No iPod® connection when connecting via USB ?Intermittent rebooting when connecting/disconnecting the iPod® USB ?Intermittent error screen when connecting/disconnecting the iPod® USB ?Navigation screen is locked after ACC/ON ?Internet radio is inoperative after connecting/disconnecting the iPod® USB ?Screen flick operation updates ?Navigation voice guidance is intermittently in the wrong language ?Audio does not mute when using Siri® Eyes Free ?Hands-free call is disconnected when another call is received?Voice cannot be heard for several seconds on the handset after the navigation unit is turned off?Sound settings reset after ACC OFF/ON?Volume control intermittently inoperative?Unable to switch between audio modes?Ending video playback concerns?Intermittent rebooting?Unable to connect to an Apple® device via USB?Navigation map inoperative after software update?Navigation map does not display?Screen will not dim?Abnormal operation after using Siri® Eyes Free?Abnormal operation when using BT Audio?My Car Log does not show mileage?Flickering screen?CAN date/time shift?Intermittent sound from JBL equipped vehicles?Backup camera stays on?Abnormal noise when during ACC ON?Cannot change songs when playing PANDORA®?Intermittent black screen?Intermittent rebooting?Delay when using navigation?Intermittently Rebooting?Intermittent screen flashing?Intermittent screen going blank?Abnormal phone touch tone operation during Apple CarPlay® (if equipped)?Sound settings intermittently reset?Unable to switch audio modes
Safety Recall an
Service Bulletin/Repair Instructions
Safety Recall and Service Campaign - Technician Certification Requirements
T-SB-0060-19_Rev
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our dealership?s new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories. ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet ?Final Inspection and Cleaning.?) A new PDS Check Sheet has been developed for the 2020 model year Prius Prime. Some check points have been added, expanded, or clarified.
T-SB-0039-19_Rev
Service Bulletin/Repair Instructions
Some 2019 model year RAV4, RAV4 Hybrid and some 2019 ? 2020 model year Sienna vehicles equipped Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Toyota Apps fail to download ?Bluetooth® is unable to automatically connect AFTER key cycle ?Abnormal microphone operation ?Sirius XM® antenna disconnection history Diagnostic Trouble Code (DTC) B15FE?No outgoing voice during phone calls when using Apple CarPlay® ?Incoming calls incorrectly shown on the Multi-information Display (MID) when using Apple CarPlay® ?CAN networking DTC B1321 ?Volume inoperative AFTER using Siri® ?Unable to adjust the treble audio setting ?Song information flickering ?Unable to select Sirius XM® music genre by voice recognition ?Noise when hanging up call on handset ?Transferred contacts do NOT match the number of handset contacts ?Sirius XM® sound slow to start ?Abnormal Toyota Apps and Scout Operation ?Some vehicles equipped with Audio Plus (version 1195), Premium Audio (version 1195) or Navigation (version 1035) or earlier may exhibit one or more of the following conditions: ?Unable to play audio source after incoming call ?Software enhancements ?Intermittent rebooting ?Unable to register Bluetooth® devices from Bluetooth® Audio Mode ?Unable to pair Android? devices after Google? apps update ?Unable to access camera diagnosis system ?USB audio doesn?t resume ?Intermittent Bluetooth® disconnection ?Abnormal voice recognition operation?Phone call history does not update ?Bluetooth® loses connection after USB connection is made ?Navigation inoperative ?Microphone disconnected pop-up message ?Clock not displayed on the map screen ?Intermittent phone ringing with no incoming phone call ?Clock format changes from 12 ? 24 hours intermittently ?Screen intermittently goes blank ?Sound changes from one speake
T-SB-0008-20
Service Bulletin/Repair Instructions
TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
T-SB-0007-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE January 24, 2020 Rev1: ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, no more than 48 hours before to customer delivery.
T-TT-0520-19_Rev
Service Bulletin/Repair Instructions
TT: In certain cases of leaking air conditioning systems, the root cause of the leak is inadvertently overlooked, causing a repeat repair. To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.
T-SB-0006-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE January 15, 2020 Rev2: ? The entire bulletin has been updated. February 11, 2019 Rev1: ? The Introduction and Every Two Months sections have been updated. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: ? Hybrid Vehicle (HV) battery ? Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE ? BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the ?P? position and apply the parking brake completely. The shift lever CANNOT be shifted from the ?P? position with the auxiliary battery disconnected. ? If the negative (?) terminal of the auxiliary battery is reconnected, even if the vehicle is powered ON (Ready ON), the hybrid system may NOT start. In this case, depress the brake pedal and press the Power button to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.
T-TT-0470-17_Rev
Service Bulletin/Repair Instructions
TT: All grades of 2018-2020 model year Mirai, Sienna, CH-R, and 2020 model year Land Cruiser, Prius, and Prius Prime vehicles are not compatible with Toyota Remote Connect app features. The Toyota Remote Connect mobile app lets you lock and unlock doors, start the engine, find your vehicle in a parking lot, and monitor guest drivers.
T-TT-0442-17_Rev
Service Bulletin/Repair Instructions
TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active after the initial trial period. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as ?ATX webserver is Down? or ?ATX error? will be displayed.
T-TT-0578-19
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-TT-0577-19
Service Bulletin/Repair Instructions
TT: On 2016-2020 model year Prius and 2017-2020 model year Prius Prime vehicles follow the recommendations when performing the HVAC odor maintenance service using A/C Power Foam Evaporator Cleaner & Refresher.
T-TT-0576-19
Service Bulletin/Repair Instructions
TT: Some Prius Prime customers may experience a MIL ON condition. Vehicles might be put into a failsafe mode and usage of battery will be discontinued. Technicians find DTC code P0ABF28 stored in the ECU.
T-TT-0573-19
Service Bulletin/Repair Instructions
TT: Some customers may experience a call failure when attempting to call a conference call number that has been saved in their phonebook (ex: ?8005550122,,,1.,2;;;2#?). This issue is caused by changes to the Bluetooth in the iOS 13 update and may be resolved in a future iOS update.
T-TT-0553-19
Service Bulletin/Repair Instructions
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker
T-SB-0158-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 03, 2019 Rev1: ? Applicability has been updated to include 2020 model year Supra vehicles. ? The Hook and Loop Style section has been added. Any previous printed versions of this bulletin should be discarded. 2020 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference. CAUTION ? ALWAYS verify the floor mat is designed specifically for the model and model year it is being installed in. ? ONLY use floor mats that can be secured using the retainers. ALL OEM Toyota floor mats are specifically designed to fit correctly and be secured using the retainers. ? Make sure the floor mat is properly placed on the vehicle carpet and secured with the retainers. If the driver side floor mat is NOT properly placed and secured, it could slip and interfere with the movement of the pedals during driving and may cause an accident. ? Verify the operation of the accelerator, brake, and clutch (if equipped) pedals and clearance to the mat. ? NEVER install more than one floor mat at a time in the driver?s seating position. ? If applicable, ANY secondary set of floor mats (based upon customer preference, such as the all-weather floor mats or other floor mats) MUST be placed in the trunk with ALL the packaging material intact. Do NOT install the secondary mat on top of the primary floor mat already installed in the driver?s seating position.
T-SB-0134-16-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-PG007-01
Service Bulletin/Repair Instructions
Replacement vin plates.
T-PG002-91
Service Bulletin/Repair Instructions
Product general information.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.