Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-SB-0055-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0110-24 Rev1
Over The Air
A head unit software update is available for 2022 – 2023 model year GR86 vehicles equipped with Toyota Multimedia software version 10 or earlier. The software can be updated to version 11 with a USB update. This software update addresses following items: •Display screen is blank (this does not affect the backup camera). •Head unit rebooting (this does not affect the backup camera). •Sirius XM® radio is inoperative. •Bluetooth® disconnects and does not reconnect automatically. •Scroll bar is inoperative even when vehicle is stopped. •Phone screen setting reset after ignition cycle. •Radio and/or media buttons won’t change the display screen. •A “Please go to your retailer to update the Gracenote® Database” message appears unexpectedly. •Apple CarPlay® enhancements. •Android Auto™ enhancements. •A “Software update setup is initializing” message appears during USB update and does not go away. •The touch screen is inoperative. •Unable to switch the audio source. •Radio sound inoperative. •Radio presets reset. •Sirius XM® radio enhancements. •USB audio enhancements. •Phonebook contact name order incorrect. •Text message audible playback stops. •Navigation voice guidance stops. •Unable to make a phone call with phone icon in messages tab. •HD radio enhancements. •CD player does not eject CD. •OTA (Over the Air) and USB software update enhancements. •Display screen reboots (this does not affect the backup camera display). •No sound from head unit audio. •Pop-up messages stuck on Apple CarPlay® Screen (this does not affect the backup camera display). •Volume knob is inoperative during Android Auto™. •Media button is inoperative. •Radio station preset selection is inoperative. •Sirius XM® satellite radio sound is inoperative after phone call ends. •Incorrect song description is displayed. •An “Are you sure you want to activate this profile?” message appears on the display screen even if using the last paired phone. •Messages screen shows dates as 1/1/0. •USB audio cover art does not update. •Sirius XM® satellite radio channel name is missing. •USB audio goes to next folder before the previous one ends. •Voice command to play specific artist or album plays previously played USB audio song instead. •Voice command to play specific artist via USB audio only plays the first album. •Maintenance date shows a hyphen instead of a date. •Software update confirmation screen does not appear. This USB software update addresses the items above, plus: •No audio plays, only abnormal noise is heard from the speakers. •PCS activation banner stays on radio display screen after PCS event (this does not affect the backup camera display). This OTA software update addresses following items: •Head unit rebooting (this does not affect the backup camera display). •Display screen is blank (this does not affect the backup camera display). •The touch screen is inoperative. •No audio. •CarPlay® is inoperative. •CarPlay® disconnects. •“Feature is not available” message appears with iPhones on iOS 16.4 or later. •The Microphone is inoperative during CarPlay® phone calls. •Android Auto™ is inoperative. •Music plays from Android device instead of Android Auto™ vehicle speakers. •Bluetooth® system enhancements. •Failed Bluetooth® and Android Auto™ connections don’t automatically reconnect. •Display screen reaction is slow during Bluetooth® audio (this does not affect the backup camera display). •Radio presets clear. •Sirius XM® satellite radio enhancements. •Hands-free call audio volume at zero. •Phonebook transfer is inoperative. •USB audio system enhancements. •“Please wait a minute” message prevents hands-free call from starting via voice recognition. •Voice recognition system enhancements. •Date/time is incorrect. •Software update system updates and enhancements. •This USB software update addresses the items above, plus: •Head unit does not finish booting up (this does not affect the backup camera display).
T-SB-0058-23 Rev1
Service Campaign
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-SB-0107-20 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.
T-SB-0013-24 Rev1
Service Bulletin/Repair Instructions
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
T-SB-0021-25
Service Bulletin/Repair Instructions
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0011-25
Service Bulletin/Repair Instructions
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.
TSB003423
Service Bulletin/Repair Instructions
TSB: A head unit software update is now available for 2022 ? 2023 model year GR86 vehicles equipped with Toyota Multimedia software version 10 or earlier. The software can be updated to version 11 with a USB update. This software update addresses following items: ?Display screen blank (does not affect backup camera). ?Head unit rebooting (does not affect backup camera). ?SXM radio inoperative. ?Bluetooth disconnects and does not reconnect automatically. ?Scroll bar inoperative even when vehicle is stopped. ?Phone screen setting reset after ignition cycle. ?Radio and/or media buttons won?t change the display screen. ?A ?Please go to your retailer to update the Gracenote® Database? message appears unexpectedly. ?Apple CarPlay® enhancements. ?Android AutoTM enhancements. ??Software update setup is initializing? appears during USB update and does not go away. ?Touch screen inoperative. ?Unable to switch audio source. ?Radio sound inoperative. ?Radio presets reset. ?SXM radio enhancements. ?USB audio enhancements. ?Phonebook contact name order incorrect. ?Text message audible playback stops. ?Navigation voice guidance stops. ?Unable to make phone call with phone icon in messages tab. ?HD radio enhancements. ?CD does not eject. ?OTA (Over the Air) and USB software update enhancements. A head unit software update by OTA is also available for 2022 model year GR86 vehicles equipped with Toyota Multimedia software version nine or earlier. The software can be updated to version 10 by OTA update. This software update addresses the following items: ?Display screen blank (does not affect backup camera). ?Head unit rebooting (does not affect backup camera). ?SXM radio inoperative. ?Bluetooth disconnects and does not reconnect automatically. ?Scroll bar inoperative even when vehicle is stopped. ?Phone screen setting reset after ignition cycle. ?Radio and/or media buttons won?t change the display scree
T-SB-0034-23 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE December 06, 2024: This bulletin is now obsolete. Please see T-SB-0110-24.
T-SB-0035-24 Rev2
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev2
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev2
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0061-23 Rev2
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
T-SB-0062-23 Rev2
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
T-SB-0110-24
Service Bulletin/Repair Instructions
A head unit software update is now available for 2022 – 2023 model year GR86 vehicles equipped with Toyota Multimedia software version 10 or earlier. The software can be updated to version 11 with a USB update. This software update addresses following items: •Display screen blank (does not affect the backup camera).•Head unit rebooting (does not affect the backup camera).•Sirius XM® radio inoperative. •Bluetooth® disconnects and does not reconnect automatically.•Scroll bar inoperative even when vehicle is stopped.•Phone screen setting reset after ignition cycle.•Radio and/or media buttons won’t change the display screen.•A “Please go to your retailer to update the Gracenote® Database” message appears unexpectedly.•Apple CarPlay® enhancements.•Android Auto™ enhancements.•“Software update setup is initializing” appears during USB update and does not go away.•Touch screen inoperative.•Unable to switch audio source.•Radio sound inoperative.•Radio presets reset.•Sirius XM® radio enhancements.•USB audio enhancements.•Phonebook contact name order incorrect.•Text message audible playback stops.•Navigation voice guidance stops.•Unable to make phone call with phone icon in messages tab.•HD radio enhancements.•CD player does not eject CD.•OTA (Over the Air) and USB software update enhancements.•A head unit software update is now available for 2022 – 2023 model year GR86 vehicles equipped with Toyota Multimedia software version 11 or earlier. The software can be updated to version 12 by OTA or USB update.•This OTA software update addresses following items:•Display screen reboots (Does not affect the backup camera display).•No sound from head unit audio.•Pop-up messages stuck on Apple CarPlay® Screen (Does not affect the backup camera display)•Volume knob inoperative during Android Auto™.•Media button inoperative.•Radio station preset selection inoperative.•Sirius XM® satellite radio sound inoperative after phone call ends.•Incorrect song description.•“Are you sure you want to activate this profile?” message appears on display screen even if using the last paired phone.•Messages screen shows dates as 1/1/0.•USB audio cover art does not update.•Sirius XM® satellite radio channel name missing.•USB audio goes to next folder before the previous one ends.•Voice command to play specific artist or album plays previously played USB audio song instead.•Voice command to play specific artist via USB audio only plays the first album.•Maintenance date shows a hyphen instead of a date.•Software update confirmation screen does not appear. •This USB software update addresses the items above, plus:•No audio plays, only abnormal noise is heard from the speakers.•PCS activation banner stays on radio display screen after PCS event (Does not affect the backup camera display).•A head unit software update is now available for 2022 – 2024 model year GR86 vehicles equipped with Toyota Multimedia software version 12 or earlier. The software can be updated to version 13 by OTA or USB update.•This OTA software update addresses following items:•Head unit rebooting (Does not affect the backup camera display).•Display screen blank (Does not affect the backup camera display).•Touch screen inoperative.•No audio.•CarPlay® inoperative.•CarPlay® disconnects.•“Feature is not available” message appears with iPhones on iOS 16.4 or later.•Microphone inoperative during CarPlay® phone calls.•Android Auto™ inoperative.•Music plays from Android device instead of Android Auto™ vehicle speakers.•Bluetooth® system enhancements.•Failed Bluetooth® and Android Auto™ connections don’t automatically reconnect.•Display screen reaction slow during Bluetooth® audio (Does not affect the backup camera display).•Radio presets clear.•Sirius XM® satellite radio enhancements.•Hands-free call audio volume at zero.•Phonebook transfer inoperative.•USB audio system enhancements.•“Please wait a minute” message prevents hands-free call from starting via voice recognition.
T-SB-0055-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0035-24 Rev1
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev1
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev1
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0055-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0061-23 Rev1
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
T-SB-0062-23 Rev1
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
T-SB-0035-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
T-SB-0039-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0111-20 Rev2
Service Bulletin/Repair Instructions
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev2: •Applicability has been updated to include 2023 – 2024 model year 86, Corolla, Corolla Cross, Corolla Cross Hybrid, Crown, GR Corolla, Mirai, Prius, Prius Prime, RAV4 Prime, Sequoia Hybrid, Sienna Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, and Yaris and 2024 model year bZ4X, Highlander, Highlander Hybrid, Grand Highlander, and Grand Highlander Hybrid vehicles. •The entire bulletin has been updated to represent GTS+ Software. July 08, 2022 Rev1: •Applicability has been updated to include 2022 model year 86, Corolla Cross, Mirai, Tundra, and Tundra Hybrid vehicles and 2023 model year bZ4X vehicles. Any previous printed versions of this bulletin should be discarded.
T-PANT-2024-004-
Service Bulletin/Repair Instructions
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
T-TT-0746-24
Service Bulletin/Repair Instructions
TT: Some 2017-2020MY and 2022-2024MY 86 vehicles may experience metallic knocking noise from the engine at all speeds. Should this condition occur, please contact TAS and your FTS to document repair information.
TSB005823
Service Bulletin/Repair Instructions
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
TSB003220
Service Bulletin/Repair Instructions
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TTT073723
Service Bulletin/Repair Instructions
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
T-SB-0107-20
Service Bulletin/Repair Instructions
TSB: Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0042-23
Service Bulletin/Repair Instructions
TSB: Some 2023 ? 2024 model year Toyota vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.
TSB-0034-23
Service Bulletin/Repair Instructions
TSB: A head unit software update is now available for 2022 ? 2023 model year GR86 vehicles equipped with Toyota Multimedia software version 10 or earlier. The software can be updated to version 11 with a USB update. This software update addresses following items: ? Display screen blank (does not affect backup camera). ? Head unit rebooting (does not affect backup camera). ? SXM radio inoperative. ? Bluetooth disconnects and does not reconnect automatically. ? Scroll bar inoperative even when vehicle is stopped. ? Phone screen setting reset after ignition cycle. ? Radio and/or media buttons won?t change the display screen. ? A ?Please go to your retailer to update the Gracenote Database? message appears unexpectedly. ? Apple CarPlay® enhancements. ? Android AutoTM enhancements. ? ?Software update setup is initializing? appears during USB update and does not go away. ? Touch screen inoperative. ? Unable to switch audio source. ? Radio sound inoperative. ? Radio presets reset. ? SXM radio enhancements. ? USB audio enhancements. ? Phonebook contact name order incorrect. ? Text message audible playback stops. ? Navigation voice guidance stops. ? Unable to make phone call with phone icon in messages tab. ? HD radio enhancements. ? CD does not eject. ? OTA and USB software update enhancements.
T-TT-0735-23-1
Service Bulletin/Repair Instructions
TT: When using a Mongoose MFC3 cable to connect for diagnostics to the DLC connector on current generation GR86, the cable may contact the driver?s door panel when closed. Please see attached photos for an example of this condition. It is recommended that an ADVi unit be used for diagnostics or the driver?s door remain open if using a Mongoose MFC3, to prevent any damage to the DLC connector, cable, or door panel.
T-TT-0735-23
Service Bulletin/Repair Instructions
TT: When using a Mongoose MFC3 cable to connect for diagnostics to the DLC connector on current generation GR86, the cable may contact the driver?s door panel when closed. Please see attached photos for an example of this condition. It is recommended that an ADVi unit be used for diagnostics or the driver?s door remain open if using a Mongoose MFC3, to prevent any damage to the DLC connector, cable, or door panel
T-SB-0031-22 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE November 28, 2022: This bulletin is now obsolete. Please see T-SB-0105-22
T-SB-0032-22 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE November 28, 2022: This bulletin is now obsolete. Please see T-SB-0104-22.
T-SB-0104-22
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer
T-SB-0105-22
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
T-SB-0032-22 Rev
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.
T-SB-0031-22 Rev
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle
T-SB-0029-22 Rev
Service Bulletin/Repair Instructions
TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference
T-SB-0036-22 Rev
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately
TSB005422
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year 86 vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines
T-SB-0036-22
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately
T-SB-0032-22
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.
T-SB-0029-22
Service Bulletin/Repair Instructions
TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.