T-SB-0043-14
Service Bulletin/Repair Instructions
OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-SB-0043-14
OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
TSB003220
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TTT063620
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
Toyota Safety Re
Toyota Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0636-20 Rev
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0032-20 Rev
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-TT-0636-20
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0304-17 Obs
TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
T-SB-0032-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
T-SB-0304-17_Rev
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
T-SB-0057-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
WLK052418
Provides instructions for returning Walker Exhaust Systems' BM Premium Pipe (P/N 55096). Because the part did not have the oxygen sensor fitting drilled out, it will not allow the sensor to be installed.
T-SB-0144-08_Obs
TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
T-SB-0304-17
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
T-SB-0218-17_Rev
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.
TSB018217
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
Safety Recall an
Update on Technician Certification Requirements.
T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.
T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
T-TT-0213-13
Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
T-SB-0185-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
TS-BO030-01 Obso
This bulletin is now obsolete. Please see T-SB-0185-13.
T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Toyota leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Toyota strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Toyota strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
T-TT-0269-13
The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
T-SB-0071-11 Rev
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
TC13-019
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
T-PG006-00 Obsol
This bulletin is now obsolete. Please see T-SB-0054-13.
T-SB-0054-13
California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
TCS-11-029
TOYOTA: INFORMATION PERTAINING TO REISSUANCE OF FOLLOW UP NOTIFICATION LETTER TO CUSTOMERS FOR CERTAIN VEHICLES FOR THE PHASE 2 CORROSION RESISTANT COMPOUND TO FRAME OF TRUCKS. *PE
TSB-0122-11
TOYOTA: INFORMATION PROVIDED FOR REPLACING THE SEAT COVERS FOR VEHICLES EQUIPPED WITH SIDE AIRBAGS. *PE
LSC-90-D
TOYOTA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. A NUMBER OF VEHICLES OPERATING IN SEVERE COLD CLIMATE AREAS WITH HIGH ROAD SALT USED EXHIBITED EXCESSIVE RUST CORROSION TO THE FRAME, CAUSING PERFORATION OF THE METAL. THE FRAMES IN THIS SMALL NUMBER OF VEHICLES MAY NOT HAVE ADEQUATE CORROSION RESISTANT PROTECTION FOR USE IN THIS ENVIRONMENT. *PE UPDATED /25/11 *PE
TC-11-013
TOYOTA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. A SERVICE CAMPAIGN TO APPLY ANTI-CORROSION MATERIALS FOR VEHICLES IN COLD STATES. 1996-2004 TACOMAS. *RM
POL08-03
TOYOTA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. CUSTOMER SUPPORT PROGRAM - WARRANTY COVERAGE EXTENSION FOR FRAME RUST CORROSION PERFORATION ON CERTAIN 1995 THROUGH 2000 MY TACOMA VEHICLES. *NJ
03704
ENGINE BANK 1 AND BANK 2 A/F AND 02 IDENTIFICATION. VARIOUS TOYOTA MODELS. *TT
PG00503
SPARE TIRE CARRIER OPERATION. VARIOUS MODLELS INCLUDING THE 2004 LANDCRUISER AND 4 RUNNER. *TT
DL00203
REAR AXLE SEAL DESIGN CHANGE. *TT
BO01901
INFORMATION REGARDING SHOULDER BELT ANCHOR TAPE SET. *JB
T-PG007-01
Replacement vin plates.
345
SUBJECT REGARDING WATER LEAK FIX REPAIR. *TT
1698
WATER LEAK FIELD-FIX REPAIR INSTRUCTIONS. *YC *TT
BO02600
INFORMATION ON WATER LEAK FIELD-FIX REPAIR INSTRUCTIONS. *JB
BO01900
SUBJECT REGARDING FRONT MUDGUARDS FOR VEHICLES STARTING WITH VIN 4TAPM62N*YZ653866. *TT
EL00400
SUBJECT ON DELAYED UPSHIFT TO OVERDRIVE WITH CRUISE CONTROL ENGAGED. *MJS
116
ELECTRONIC MAIL REGARDING EXTERIOR MIRROR ASSEMBLY. *TT
BO01200
INFORMATION INTRODUCING CHANGES MADE TO IMPROVE THE ADJUSTABILITY OF THE DRIVER'S SIDE EXTERIOR REAR VIEW MIRROR ON VEHICLES STARTING WITH VIN 4TAWN72N9XZ564100. *TT
BO00100
INFORMATION REGARDING A NEW ANTI-CHIP TAPE DEVELOPED TO HELP PREVENT REPEAT OCCURRENCES OF PAINT CHIPPING ON THE REAR QUARTER PANELS. *TT
EC01299
SUBJECT REGARDING RADIATOR LEAK FROM OVERFLOW PIPE. *TT
EG01299
VEHICLES MAY EXPERIENCE A RADIATOR LEAK FROM THE COOLANT OVERFLOW PIPE HOSE. *TT
EG01199
INFORMATION INTRODUCING DESIGN CHANGES TO THE 5VZ OXYGEN SENSOR TO REDUCE POSSIBILITY OF MOISTURE CONTACTING THE CERAMIC ELEMENT. *TT
BO01399
SOME VEHICLES STARTING WITH VIN 4TAVL52N*XZ469062 MAY EXHIBIT A RATTLE NOISE CAUSED BY THE FRONT LOWER WINDOW GLASS FRAME. *TT
DL00199
THIS BULLETIN PROVIDES THE LOCATION OF THE GREASE FITTINGS FOR THE PROPELLER SHAFT JOINTS AS WELL AS THE TYPE OF GREASE TO USE WITH EACH FITTING LOCATION. *TT
TC00599
INFORMATION TO MINIMIZE CLUTCH PEDAL SQUEAKING NOISE WHEN DEPRESSING OR RELEASING THE CLUTCH PEDAL. *TT
EG00699
SUBJECT REGARDING 5VZ OXYGEN SENSOR IMPROVEMENT FOR VEHICLES BUILT BEFORE CERTAIN VIN RANGES. *TT
AX00499
SUBJECT REGARDING TOYOTA DINGHY TOWING GUIDE. *TT
AC00299
PRODUCTION CHANGES TO THE COWL TOP LOUVER AND HEATER UNIT HAVE BEEN MADE TO IMPROVE RESISTANCE TO SNOW ENTRY INTO THE HEATER UNIT AND IMPROVE DURABILITY OF AIR MIX DOOR ON VEHICLES WITHIN CERTAIN VIN RANGES. *TT
021899
EXPERIENCING TICKING NOISE IN THE CABIN IN COLD TEMPERATURE (0.F.). *TT
010199
SUBJECT REGARDING 5VZ OXYGEN SENSOR IMPROVEMENT. *TT
EG01498
EXPERIENCING A TICKING NOISE INT HE CABIN OF THE VEHICLE IN COLD TEMPERATURES ON VEHICLES PRODUCED BEFORE VIN WZ139300. *YC
NV00898
REDUCING INTERIOR SQUEAKS AND RATTLES ON SOME 1998 VEHICLES. *YC
080498
SUBJECT REGARDING UPPER AND LOWER RADIATOR HOSE. *TT
0616
REPAIR INSTRUCTIONS FOR WATER LEAK FIELD-FIX. *YC
001698
WATER LEAK FIELD FIX REPAIR INSTRUCTIONS. *EH
AC00198
CONDITION WITH A/C INDICATOR LIGHT OPERATION IN DEFROSTER MODE. *YC
TC00198
SOME AUTOMATIC TRANSMISSIONS MAY PRODUCE A CHATTER NOISE WHEN SHIFTED OUT OT REVERSE INTO EITHER NEUTRAL OR PARK. *YC
970829AX007
INFORMATION AND PROCEDURES ON RUNNING BOARD INSTALLATION. *YC
T-PG002-91
Product general information.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.