Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-SB-0055-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
23TE08
Service Campaign
Toyota has received some reports of paint peeling along the exterior door window frames, front inner fenders as can been seen with the hood open, and on the A-pillars on certain Tacoma vehicles with 040 Super White paint color. Although the vehicle paint is covered by Toyota’s New Vehicle Limited Warranty for three years, or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing coverage for repairs related to the conditions described above.
T-TT-0790-25
Service Bulletin/Repair Instructions
Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low.
T-SB-0099-24 Rev1
Service Bulletin/Repair Instructions
Some 2016 – 2022 model year Tacoma vehicles with Super White (040) paint may exhibit paint peeling along the exterior window door frames, inner fender edges under the hood, and/or A-pillars. The affected panel(s) require repainting to address this condition. The paint repair may need to be sublet to a body shop.
21TD03
Other
21TD03 Final Reminder
T-SB-0035-24 Rev2
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev2
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev2
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0061-23 Rev2
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
T-SB-0062-23 Rev2
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
T-SB-0099-24
Service Bulletin/Repair Instructions
Some 2016 – 2022 model year Tacoma vehicles with Super White (040) paint may exhibit paint peeling along the exterior window door frames and/or inner fender edges under the hood. The affected panel(s) require repainting to address this condition. The paint repair may need to be sublet to a body shop.
T-SB-0055-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
LSC_remails
Other
Customer renotificaions for 21TD03, 22LD01, 22LD02
T-SB-0035-24 Rev1
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev1
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev1
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0055-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0103-20 Rev1
Service Bulletin/Repair Instructions
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
T-SB-0061-23 Rev1
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
T-SB-0062-23 Rev1
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
T-SB-0035-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
T-SB-0039-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-TT-0754-24
Service Bulletin/Repair Instructions
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
T-PANT-2024-004-
Service Bulletin/Repair Instructions
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
K0D_TIS_DealerPa
Service Bulletin/Repair Instructions
DP: K0D expired on 10/31/2023. Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D_TIS_ProgramO
Service Bulletin/Repair Instructions
K0D expired on 10/31/2023.
K0D_TIS_Technica
Service Bulletin/Repair Instructions
TI: K0D expired on 10/31/2023. TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2016 ? 2017 MODEL YEAR TACOMA
T-SB-0043-14
Service Bulletin/Repair Instructions
OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
23TE08-1
Service Bulletin/Repair Instructions
RL: Toyota has received some reports of paint peeling along the exterior door window frames and front inner fenders under the hood on certain Tacoma vehicles with 040 Super White paint color.
23TE08-2
Service Bulletin/Repair Instructions
FAQ: Certain 2016-2022 Model Year Tacoma Vehicles Painted with Super White (040) Paint Color Coverage for Paint Peeling on Door Frames + Front Inner Fenders Frequently Asked Questions
TSB005823
Service Bulletin/Repair Instructions
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
TSB003220
Service Bulletin/Repair Instructions
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TSB011219
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released.
T-SB-0057-18
Service Bulletin/Repair Instructions
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
Z1A Dealer Lette
Service Bulletin/Repair Instructions
DP: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. Although perforation of the vehicle?s frame is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to vehicle frame corrosion perforation. A separate program (limited Service Campaign K0D) will include CRC (Corrosion Resistant Compound) application. CRC application will be covered under Limited Service Campaign (LSC K0D) for a period of two years and will only be available for vehicles registered/regularly operated in the Cold Climate States that do not meet vehicle frame replacement criteria.
ZKA Letter
Service Bulletin/Repair Instructions
DL: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. Although perforation of the vehicle?s frame is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to vehicle frame corrosion perforation. A separate program (limited Service Campaign K0D) will include CRC (Corrosion Resistant Compound) application. CRC application will be covered under Limited Service Campaign (LSC K0D) for a period of two years and will only be available for vehicles registered/regularly operated in the Cold Climate States that do not meet vehicle frame replacement criteria.
23TE01 Dealer Pa
Service Bulletin/Repair Instructions
DP: Although the high-pressure fuel pump is covered by Toyota?s New Vehicle Limited Warranty for 5 years or 60,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the presence of a fuel odor in or around the engine bay originating at the high-pressure fuel pump of the subject vehicles.
T-SB-0033-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Tacoma vehicles may exhibit a condition where snow or ice builds up between the right or left front door and front fender, preventing the front door from fully opening. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0721-23 Rev
Service Bulletin/Repair Instructions
TT: Electronic Parts Catalog (EPC) does not include notes requiring ordering the Protector Heater seals when replacing the air conditioning Evaporator Core (88511- #####) or Radiator Heater Unit SubAssembly (87107- #####
T-TT-0721-23
Service Bulletin/Repair Instructions
TT: Electronic Parts Catalog (EPC) does not include notes requiring ordering the Protector Heater seals when replacing the air conditioning Evaporator Core (87511- #####) or Radiator Heater Unit Sub-Assembly (87107- #####).
T-SB-0115-22
Service Bulletin/Repair Instructions
TSB: Some 2019 ? 2022 model year Avalon, 2018 ? 2023 model year Camry, 2017 ? 2022 model year Highlander, 2017 ? 2020 model year Sienna, and 2016 ? 2023 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump at idle. Follow the Repair Procedure in this bulletin to address this condition
K0D - Dealer Pac
Service Bulletin/Repair Instructions
DP Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
T-SB-0124-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Tacoma vehicles equipped with an automatic transmission (6AT) may exhibit a vibration under deceleration (coasting or braking) typically between 30 ? 10 mph. This vibration is felt in the seat, floorboard, and/or steering wheel. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0094-21 Rev
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0004-22 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Tacoma vehicles may exhibit what customers describe as a 1 ? 3-second whistle noise from the HVAC system when the air conditioning system is ON. The whistle noise may occur as the compressor cycles on and off and is more prevalent with increased engine RPM during hot ambient temperatures. Follow the Repair Procedure in this bulletin to address this condition.
K0D
Service Bulletin/Repair Instructions
DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D Quality
Service Bulletin/Repair Instructions
DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment
TSB001221Rev2
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
TSB004522Rev1
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
T-SB-0015-21 Rev
Service Bulletin/Repair Instructions
TSB: This Service Bulletin provides a procedure to properly perform the Techstream ?Control the Injection Mode? active test in some 2016 ? 2022 model year Toyota vehicles equipped with an FKS engine
TSB009421Rev1
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
Service Campaign
Service Bulletin/Repair Instructions
DP: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment
TSB000320
Service Bulletin/Repair Instructions
OBSOLETE NOTICE May 02, 2022: This bulletin is now obsolete. Please see T-SB-0045-22
T-SB-0045-22
Service Bulletin/Repair Instructions
Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now avail
21TD03 Remedy No
Service Bulletin/Repair Instructions
RL: The Center High-Mounted Stop Lamp on the involved vehicles has a seal between the lamp and the vehicle body which can deteriorate over time. If the seal deteriorates sufficiently, water from outside the vehicle could leak into the vehicle cabin through the seal.
21TD03 - 2016-20
Service Bulletin/Repair Instructions
DP: The Center High-Mounted Stop Lamp on the involved vehicles has a seal between the lamp and the vehicle body which can deteriorate over time. If the seal deteriorates sufficiently, water from outside the vehicle could leak into the vehicle cabin through the seal
TTT063620
Service Bulletin/Repair Instructions
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
T-TT-0686-22
Service Bulletin/Repair Instructions
TT: The purpose of this Tech Tip is to provide diagnostic tips to prevent misdiagnosis of the following DTC?s and prevent repeat repairs. One or more of the Heated Oxygen Sensors (O2) or Air Fuel ratio sensor (A/F) DTCs below could set due to a leaking exhaust system. If you encounter a vehicle with any of these DTCs
ZKA-TI-16_17MY P
Service Bulletin/Repair Instructions
TECHNICAL INSTRUCTIONS FOR WARRANTY ENHANCEMENT PROGRAM ZKA CERTAIN 2016 THROUGH 2017 MODEL YEAR TACOMA
T-SB-0012-21 Rev
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0094-21
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
T-TT-0600-20 Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
T-TT-0669-21
Service Bulletin/Repair Instructions
TT: Use the following aids in conjunction with the repair manual when removing the fuel tank from 2016-2022 model year Tacoma vehicles.
T-TT-0578-19 Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
21TD03 - Dealer
Service Bulletin/Repair Instructions
DD: Certain 2016-2019 Model Year Double Cab Tacoma Center High-Mounted Stop Lamp ? Water Leak 21TD03 has been updated with part number 00948-CHMHW-01, this part number has been created for CLAIM FILING PUPRPOSES ONLY. Part number 00948-CHMSL-HW should no longer be included when submitting claims.
T-SB-0080-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
Toyota PRO21-UFR
Service Bulletin/Repair Instructions
UPDATES TO THE 2014-2021 TOYOTA UNIVERSAL FLAT RATE MANUAL
ZKA Dealer Packe
Service Bulletin/Repair Instructions
DP: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. 1 ? District of Columbia (DC), CT, DE, IL, IN, KY, MA, MD, ME, MI, MN, NH, NJ, NY, OH, PA, RI, VA, VT, WI, and WV. Although perforation of the vehicle?s frame is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to vehicle frame corrosion perforation. A separate program (limited Service Campaign K0D) will include CRC (Corrosion Resistant Compound) application. CRC application will be covered under Limited Service Campaign (LSC K0D) for a period of two years and will only be available for vehicles registered/regularly operated in the Cold Climate States that do not meet vehicle frame replacement criteria.
T-SB-0098-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2020 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a chirp noise from the main accessory drive belt. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0015-21
Service Bulletin/Repair Instructions
TSB: This Service Bulletin provides a procedure to properly perform the Techstream ?Control the Injection Mode? active test in some 2016 ? 2021 model year Toyota vehicles equipped with an FKS engine.
T-SB-0044-16 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE March 08, 2021: This bulletin is now obsolete. Please see T-SB-0012-21.
Toyota Safety Re
Service Bulletin/Repair Instructions
Toyota Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0636-20 Rev
Service Bulletin/Repair Instructions
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0012-21
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2021 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
K0D Region Lette
Service Bulletin/Repair Instructions
RL: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D-TI-Spray 16-
Service Bulletin/Repair Instructions
TI: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2016 ? 2017 MODEL YEAR TACOMA
Limited Service
Service Bulletin/Repair Instructions
DE: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
T-SB-0043-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2020 model year Tacoma vehicles equipped with a 2GR-FKS engine and a manual transmission may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P211904 (ECM/PCM Throttle Actuator ?A? Control Throttle Body Range/Performance System Internal Failure) with vehicle entering limp mode. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0003-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match radio station that is playing. ?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Updated system software is now available to address these conditions. Follow the Software Update Procedure in this bulletin to install the latest software version.
T-SB-0032-20 Rev
Service Bulletin/Repair Instructions
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-SB-0093-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2021 model year Tacoma vehicles may exhibit a condition where the air conditioning system shuts down and stops blowing cool air during periods of extended engine idle with ambient temperatures greater than 100°F. Follow the Repair Procedure in the bulletin to address this condition.
T-SB-0071-19 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE December 15, 2020: This bulletin is now obsolete. Please see T-SB-0124-20.
T-SB-0124-20
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2021 model year Tacoma vehicles equipped with an automatic transmission may exhibit a vibration under deceleration (coasting or braking) between 30 ? 10 mph. This vibration is felt in the seat, floorboard, and/or steering wheel. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0636-20
Service Bulletin/Repair Instructions
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0013-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Prius and Tacoma, 2017 ? 2018 model year Prius Prime and Sienna, and 2018 model year Camry and Camry Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P261093 (ECM/PCM Engine Off Timer Performance No Operation) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0114-20
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2021 model year Tacoma vehicles may exhibit a condition in which the wireless phone charger assembly rubber pad is deformed. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0628-20
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to be blocked/clogged.
T-SB-0098-20
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2020 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a chirp noise from the main accessory drive belt. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0063-18 Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE September 22, 2020: This bulletin is now obsolete. Please see T-SB-0093-20.
T-SB-0093-20
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2020 model year Tacoma vehicles may exhibit a condition where the air conditioning system shuts down and stops blowing cool air during periods of extended engine idle with ambient temperatures greater than 100°F. Follow the Repair Procedure in the bulletin to address this condition.
T-TT-0468-17 Rev
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to be blocked/clogged.
K0D - After Sale
Service Bulletin/Repair Instructions
DL: The Toyota Spray Wax Aftersales Support Program has been created to provide dealers access to replacement parts, consumables and express exchange. Bosch Automotive Service Solutions will be facilitating this program on behalf of Toyota. Included in the Toyota Spray Wax Aftersales Support Program are approximately 20 tools. The tools will be available to order through the Toyota Special Service Tools (SSTs) hotline.
T-TT-0552-19 Rev
Service Bulletin/Repair Instructions
TT: Repairing a 1234YF HVAC system on a gas powered (non-hybrid) Toyota vehicle may require additional compressor oil to complete the repairs. The various 1234YF compressor oils (ND-12, PS-D1, or VC100YF) are available through the Toyota Approved Dealer Equipment website.
T-SB-0071-19 Rev
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0171-16. Some 2016 ? 2019 model year Tacoma vehicles equipped with an automatic transmission may exhibit a vibration under deceleration (coasting or braking) between 30 ? 10 mph. This vibration is felt in the seat, floorboard, and/or steering wheel.
K0D-TI-Spray 11-
Service Bulletin/Repair Instructions
TI: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2011 ? 2015 MODEL YEAR TACOMA
T-SB-0071-19_Rev
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2019 model year Tacoma vehicles equipped with an automatic transmission may exhibit a vibration under deceleration (coasting or braking) between 10 ? 30 mph. This vibration is felt in the seat, floorboard, and/or steering wheel. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0043-20
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma vehicles equipped with a 2GR-FKS engine and a manual transmission may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P211904 (ECM/PCM Throttle Actuator ?A? Control Throttle Body Range/Performance System Internal Failure) with vehicle entering limp mode. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
K0D - Technical
Service Bulletin/Repair Instructions
TI: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2011 ? 2015 MODEL YEAR TACOMA
K0D_Limited Serv
Service Bulletin/Repair Instructions
RE: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
T-SB-0304-17 Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
T-TT-0583-19_Rev
Service Bulletin/Repair Instructions
TT: Some customers who have upgraded their iPhone® to iOS13 are experiencing a condition where the Bluetooth connection disconnects and reconnects. In some instances, this condition causes the Panasonic head unit to reboot when the Bluetooth connection is initiated.
T-SB-0032-20
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
K0D - Dealer Let
Service Bulletin/Repair Instructions
DL: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D_Frame Corros
Service Bulletin/Repair Instructions
Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
T-TT-0600-20
Service Bulletin/Repair Instructions
TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
T-TT-0598-20
Service Bulletin/Repair Instructions
TT: Some vehicles may experience a ?New software is not compatible with the system.? Pop-up while performing T-SB-0003-20 during the head unit software installation process
T-SB-0008-20
Service Bulletin/Repair Instructions
TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
K0D_Dealer Email
Service Bulletin/Repair Instructions
Dealer Email: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D_Dealer Packa
Service Bulletin/Repair Instructions
Dealer Package: January 23, 2020 K0D is available in Chicago Region. Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle?s frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D_Region Email
Service Bulletin/Repair Instructions
Region Email: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle's frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
K0D_Region Lette
Service Bulletin/Repair Instructions
Region Letter: Toyota has received reports regarding frame corrosion perforation on 2011 ? 2017 model year Tacoma vehicles. In these reports, customers have indicated that vehicles operated in specific cold climate areas with high road salt usage may exhibit more-than-normal corrosion to the vehicle's frame. This condition is unrelated to and separate from normal surface rust which is commonly found on metallic surfaces after some years of usage and/or exposure to the environment.
T-SB-0003-20
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0279-17. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0279-17 is obsolete and ANY printed versions should be discarded. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ? Head unit reboots at a specific location ? Abnormal Destination Search app operation ? Rebooting caused by no songs on the USB-connected iPhone ? A one-time reboot after ignition is cycled to ACC-ON ? Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ? Head unit reboots intermittently ? Half blank screen appears when on the maintenance screen and shifting to Reverse ? Screen freezes during an incoming phone call ? Incorrect time displays on the diagnostic menu ? Radio station information does not match radio station that is playing ? Abnormal playlist browsing operation ? Mute stays enabled after key cycle ? ?Search along my route? is inoperative ? Traffic data scales improperly ? Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi?) ? MID compass does not match navigation screen when switching to North up ? Navigation does not match MID when switching from miles to kilometers ? Speed limit is blank on navigation screen ? Go button on VR screen is inoperative
T-SB-0279-17_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE January 13, 2020: This bulletin is now obsolete. Please see T-SB-0003-20.
K0D_TI-Spray-Dra
Service Bulletin/Repair Instructions
Technical Instructions: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2016 ? 2017 MODEL YEAR TACOMA (2011-2015 model year instructions can be found on TIS)
T-TT-0583-19
Service Bulletin/Repair Instructions
TT: Some customers who have upgraded their iPhone® to iOS13 are experiencing a condition where the Bluetooth connection disconnects and reconnects. In some instances, this condition causes the Panasonic head unit to reboot when the Bluetooth connection is initiated.
K0D-TI-Spray-Dra
Service Bulletin/Repair Instructions
Technical Instructions: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2016 ? 2017 MODEL YEAR TACOMA (2011-2015 model year instructions can be found on TIS) COLD CLIMATE STATES ONLY
T-SB-0316-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 14, 2019 Rev2: ? The Applicability has been updated to include 2019 model year Toyota vehicles. ? The Introduction and Repair Procedure sections have been updated. August 15, 2018 Rev1: ? The Applicability has been updated to include 2018 model year Highlander, Sienna, and Tacoma vehicles. ? The Introduction and Warranty Information sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 ? 2019 model year 2GR-FKS-equipped Camry, 2017 ? 2019 model year Highlander and Sienna, and 2016 ? 2019 model year Tacoma vehicles may exhibit a knocking noise from the vacuum pump with the engine idling. Follow the Repair Procedure in this bulletin to address this condition.
ZKA_Dealer Packa
Service Bulletin/Repair Instructions
Dealer Package: K0D Estimated Launch Timing has been updated to reflect Cincinnati Region Launch. Warranty Reimbursement Procedure has been updated to reflect K0D Launch and possible outcomes after inspection. Toyota has received reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. 1 ? District of Columbia (DC), CT, DE, IL, IN, KY, MA, MD, ME, MI, MN, NH, NJ, NY, OH, PA, RI, VA, VT, WI, and WV. Although perforation of the vehicle?s frame is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to vehicle frame corrosion perforation. A separate program will be announced in the future and will include CRC (Corrosion Resistant Compound) application. Toyota is currently preparing parts and approvals for the CRC application process. CRC application will be covered under a separate Limited Service Campaign (LSC K0D) for a period of two years and will only be available for vehicles registered/regularly operated in the Cold Climate States that do not meet vehicle frame replacement criteria. This Limited Service Campaign has not yet launched at the time of this publication. Toyota expects to launch K0D in phases beginning in the Fall of 2019. The expected schedule can be seen in the chart below.
K0D-TI-Spray-16-
Service Bulletin/Repair Instructions
Technical Instructions: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0D FRAME CORROSION RESISTANT COMPOUND (CRC) APPLICATION CERTAIN 2016 ? 2017 MODEL YEAR TACOMA (2011-2015 model year instructions can be found on TIS) COLD CLIMATE STATES ONLY
T-TT-0578-19
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-SB-0094-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE October 14, 2019 Rev1: ? The Production Change Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2019 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P013A00 and/or P013C00 (O2 Slow Response) due to an incomplete weld around the front exhaust pipe assembly (either bank). Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0063-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE September 19, 2019 Rev2: ? Applicability has been updated to include 2020 model year Tacoma vehicles and engine and transmission types. ? The Warranty Information and Repair Procedure sections have been updated. February 25, 2019 Rev1: ? Applicability has been updated to include 2019 model year Tacoma vehicles and engine and transmission types. ? The Warranty Information section has been updated. ? The Repair Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2020 model year Tacoma vehicles may exhibit a condition where the air conditioning system shuts down and stops blowing cool air during periods of extended engine idle with ambient temperatures greater than 100°F. Follow the Repair Procedure in the bulletin to address this condition.
T-TT-0574-19
Service Bulletin/Repair Instructions
TT: Some customers may experience poor outgoing Bluetooth sound quality, this can occur for various reasons. Current multimedia systems are designed with the ability to adjust Bluetooth sound quality to compensate for echo or excessive background noise.
ZKA_Dealer Email
Service Bulletin/Repair Instructions
Dealer Email: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame.
ZKA_Region Email
Service Bulletin/Repair Instructions
Region Email: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame.
ZKA_Region Lette
Service Bulletin/Repair Instructions
Region Letter: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame.
T-SB-0112-19
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0186-12. * Applicability has been updated to include 2018 and 2019 model year Tacoma vehicles. * The entire bulletin has been updated. Service Bulletin No. T-SB-0186-12 is obsolete and any printed versions should be discarded. Some 2005 - 2019 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0186-12_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE August 19, 2019: This bulletin is now obsolete. Please see T-SB-0112-19.
T-SB-0094-19
Service Bulletin/Repair Instructions
TSB: Some 2016 - 2019 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P013A00 and/or P013C00 (O2 Slow Response) due to an incomplete weld around the front exhaust pipe assembly (either bank). Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0134-16-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-TT-0552-19
Service Bulletin/Repair Instructions
TT: When repairing a 1234YF HVAC system on a gas powered (Non-Hybrid) Toyota and the addition of compressor oil is required to complete the repairs, the various 1234YF compressor oils (ND-12, PS-D1, or VC100YF) are available through the Toyota Approved Dealer Equipment website.
T-SB-0071-19
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0171-16. ? The Repair Procedure section has been updated. Service Bulletin No. T-SB-0171-16 is obsolete and any printed versions should be discarded. Some 2016 ? 2019 model year Tacoma vehicles equipped with an automatic transmission may exhibit a vibration felt in the seat, floorboard, and/or steering wheel between 10 ? 30 mph, caused by a driveline vibration under deceleration. Follow the Repair Procedure in this bulletin to address this condition. NOTE ? This Service Bulletin ONLY applies to 4WD models equipped with 6AT. Do NOT use the spring part number found in the Service Bulletin for ANY manual transmission vehicles or PreRunner models. This could lead to NEW, currently nonexistent issues. ? If the vehicle is installed with an aftermarket suspension/body lift or leveling kit, this Service Bulletin does NOT apply.
T-SB-0171-16_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE June 24, 2019: This bulletin is now obsolete. Please see T-SB-0071-19.
T-SB-0171-16-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE May 20, 2019 Rev2: ? Applicability has been updated to include 2018 ? 2019 model year Tacoma vehicles. September 1, 2017 Rev1: ? Applicability has been updated to include 2017 model year Tacoma vehicles. ? The Introduction, Production Change Information, and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2019 model year Tacoma vehicles equipped with an automatic transmission may exhibit a vibration felt in the seat, floorboard, and/or steering wheel between 10 ? 30 mph, caused by a driveline vibration under deceleration. Follow the Repair Procedure in this bulletin to address this condition. NOTE ? This Service Bulletin ONLY applies to 4WD models equipped with 6AT. Do NOT use the spring part number found in the Service Bulletin for ANY manual transmission vehicles or PreRunner models. This could lead to NEW, currently nonexistent issues. ? If the vehicle is installed with an aftermarket suspension/body lift or leveling kit, this Service Bulletin does NOT apply.
T-SB-0063-19
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma vehicles may exhibit a Blind Spot Monitor System Warning message with any of the following Diagnostic Trouble Codes (DTCs) present. ? U0232 ? Lost Communication with Blind Spot Monitor Slave Module ? U0233 ? Lost Communication with Blind Spot Monitor Master Module ? C1AC1 ? Master Module Horizontal Axis Misalignment ? C1AC2 ? Slave Module Horizontal Axis Misalignment ? C1AB6 ? Blind Spot Monitor Master Module ? C1AB7 ? Blind Spot Monitor Slave Module. Follow the Repair Procedure in this bulletin to address this condition.
TSR-SC-032819
Service Bulletin/Repair Instructions
Technician Certification Requirements.
T-SB-0021-19
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2019 model year Tacoma vehicles may exhibit corrosion or paint blistering on the front and/or rear lower door sill(s). Follow the Repair Procedure in this bulletin to address this condition
T-TT-0414-16-Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-TT-0484-18-Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
T-SB-0063-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 25, 2019 Rev1: ? Applicability has been updated to include 2019 model year Tacoma vehicles and engine and transmission types. ? The Warranty Information section has been updated. ? The Repair Procedure section has been updated with the addition of step 84. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2019 model year Tacoma vehicles may exhibit a condition where the air conditioning system shuts down and stops blowing cool air during periods of extended engine idle with ambient temperatures greater than 100°F. Follow the Repair Procedure in the bulletin to address this condition.
T-TT-0468-17-Rev
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to be blocked/clogged.
T-SB-0044-16_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 7, 2019 Rev2: * Applicability has been updated to include 2010 - 2014 model year Matrix, 2017 - 2019 model year C-HR, 2019 model year Corolla Hatchback, and 2018 - 2019 model year Toyota vehicles. G418 The Introduction and Repair Procedure sections have been updated. March 7, 2017 Rev1: * Applicability has been updated to include 2017 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0040-08. * Applicability has been updated to include applicable 2016 model year vehicles. Service Bulletin No. T-SB-0040-08 is obsolete and any printed versions should be discarded. Some 2010 - 2019 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0055-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 6, 2019 Rev2: ? The Production Change Information section has been updated. September 12, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0013-19
Service Bulletin/Repair Instructions
TSB: Some 2016 - 2018 model year Prius and Tacoma, 2017 - 2018 model year Prius Prime and Sienna, and 2018 model year Camry and Camry Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P261093 (ECM/PCM Engine Off Timer Performance No Operation) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0521-19
Service Bulletin/Repair Instructions
TT: The current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. To avoid this condition, technicians should raise engine RPM when changing back and forth between the Direct Injection and Port Injection active tests. Use the recommended procedure below to avoid this concern while testing injection mode of FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
T-SB-0279-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 13, 2018 Rev2: ? The entire bulletin has been updated. March 16, 2018 Rev1: ? Applicability has been updated to include 2018 model year vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. T-SB-0103-16 and T-SB-0337-17. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0103-16 and T-SB-0337-17 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2016 ? 2018 model year vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (version 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ? Head unit reboots at a specific location ? Abnormal Destination Search app operation ? Rebooting caused by no songs on the USB-connected iPhone ? A one-time reboot after ignition is cycled to ACC-ON ? Audio stays muted after the key is cycled
T-SB-0058-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 12, 2018 Rev2: ? The Calibration Information and the Repair Procedure sections have been updated. July 31, 2018 Rev1: ? Applicability has been updated to include 2018 model year Tacoma vehicles. ? The Parts Information and Calibration Information sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with a 2GR engine and an AC60 transmission may exhibit a surge feeling under the following conditions. ? Vehicle is traveling between 40 and 50 mph ? Transmission is in fourth or fifth gear ? During torque converter lock-up The Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been revised to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0510-18
Service Bulletin/Repair Instructions
TT: Precautions regarding lift point interference with frame hole plugs: To help prevent water from entering the vehicle's frame, hole plugs are installed in certain locations of the frame during manufacturing. ? One of the hole plug styles allow water to drain from the bottom of the frame yet block water from entering. ? This one-way drain plug is located near a usable frame lift point. If the technician does not take note of the location of one-way drain plug, it may be easily crushed by the shop lift's arm.
T-SB-0130-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma vehicles may exhibit a condition where the LH or RH seat heater is inoperative. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0088-16 Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE October 18, 2016 Rev1: The Introduction has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 model year Tacoma vehicles equipped with a 2GR engine and 6 speed manual transmission may exhibit difficulty when shifting out of ANY gear after driving for an extended period of time. Follow the Repair Procedure in the bulletin to address this condition.
T-SB-0125-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit an engine idle surge with steering input. The surge is most noticeable under the following conditions: ? The vehicle is operated at an idle creep speed. ? The steering wheel is turned (i.e., backing out of a garage or executing parking lot maneuvers). ? The engine coolant temperature is low. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0055-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE September 12, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition.
PG004-97-Obsolet
Service Bulletin/Repair Instructions
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
PG006-01-Obsolet
Service Bulletin/Repair Instructions
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
J0N-Dealer Packa
Service Bulletin/Repair Instructions
Dealer Package: There is a possibility that the blower motor fan hub in the involved vehicles was produced with improper dimensions. A blower motor fan hub with improper dimensions may develop a crack over time. If a vehicle is continuously operated with this condition, the damage may worsen, leading to an abnormal noise and eventually an inoperable blower motor fan.
J0N-Region Email
Service Bulletin/Repair Instructions
Region Email: There is a possibility that the blower motor fan hub in the involved vehicles was produced with improper dimensions. A blower motor fan hub with improper dimensions may develop a crack over time. If a vehicle is continuously operated with this condition, the damage may worsen, leading to an abnormal noise and eventually an inoperable blower motor fan.
J0N-Region Lette
Service Bulletin/Repair Instructions
Region Letter: There is a possibility that the blower motor fan hub in the involved vehicles was produced with improper dimensions. A blower motor fan hub with improper dimensions may develop a crack over time. If a vehicle is continuously operated with this condition, the damage may worsen, leading to an abnormal noise and eventually an inoperable blower motor fan.
J0N-Technical In
Service Bulletin/Repair Instructions
Technical Instructions: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN J0N HVAC BLOWER MOTOR CERTAIN 2016-2017 MODEL TACOMA
T-SB-0316-17 Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE August 15, 2018 Rev1: ? The Applicability has been updated to include 2018 model year Highlander, Sienna, and Tacoma vehicles. ? The Introduction and Warranty Information sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2GR-FKS-equipped Camry (2018 model year), Highlander, Sienna (both 2017 ? 2018 model year), and Tacoma (2016 ? 2018 model year) vehicles may exhibit a knocking noise from the vacuum pump. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0013-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE August 8, 2018 Rev1: ? Applicability has been updated to include 2018 model year Tacoma vehicles. ? The Production Change Information section has been added and the Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma Double Cab 4WD vehicles equipped with a BD22 rear differential may exhibit a whine noise from the rear of the vehicle. This condition may occur while driving around 50 mph at constant speed, slight acceleration, or slight deceleration and may be caused by rear differential vibration transferring through the chassis and body. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0304-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
T-SB-0073-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma, 2017 ? 2018 model year Sienna, Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit an engine oil leak from the cam sensor bolt hole(s). Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0063-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma vehicles may exhibit a condition where the air conditioning system shuts down and stops blowing cool air during periods of extended engine idle with ambient temperatures greater than 100°F. Follow the Repair Procedure in the bulletin to address this condition.
T-SB-0062-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma vehicles equipped with a 2GR-FKS engine and an automatic transmission may exhibit a stumble at wide open throttle takeoff during operation in a high-altitude area. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0058-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma vehicles equipped with a 2GR engine and an AC60 transmission may exhibit a surge feeling under the following conditions: ? Vehicle is traveling between 40 ? 50 mph ? Transmission is in fourth or fifth gear ? During torque converter lock-up The Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been revised to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0055-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0490-18-Rev
Service Bulletin/Repair Instructions
TT: Some 2016-2018 model year Tacoma vehicles may exhibit a squeak or rattle noise from the FR RH (No.1) Body Mount Bushing when driving over uneven roads or bumps. Make sure to confirm that the noise is coming from the FR RH (No.1) Body Mount Bushing before proceeding.
T-SB-0053-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma D-Cab vehicles may exhibit one or more of the following conditions (some conditions may be intermittent). ? No sound from speakers ? No bass from speakers ? Muffled sound from speakers ? Inoperative power door locks ? Inoperative power windows ? No answer-back (beep/chirp) after locking the doors via key fob ? Interior illumination inoperative (lighting within HVAC controls, instrument panel switches, door panel switches, etc.) ? Open fuses for one or more of the systems listed above Follow the Repair Procedure in this bulletin to address these conditions.
T-SB-0273-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE June 8, 2018 Rev2: ? Applicability has been updated to include 2018 model year Tacoma vehicles. ? The entire bulletin has been updated. October 13, 2017 Rev1: ? The Warranty Information and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles may exhibit a squeak noise from the rear leaf spring when traveling over speed bumps or with movement from loading and unloading the suspension. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0476-18_Rev
Service Bulletin/Repair Instructions
TT: The Tacoma BD20 Rear Differential has two active part numbers for the fasteners that attach the differential carrier to the axle housing. Vehicles Equipped with BD20 Differential: - Tacoma 4x4 ? 4 cylinder ? Automatic Transmission - Tacoma 4x4 ? 6 cylinder ? Automatic Transmission - Tacoma PreRunner. There are 10 fasteners on the BD20 differential (12mm fastener / 8 mm stud). The fastener part numbers are 90170-08042 & 90170-08036. There are two different torque values for these fasteners: ? 90170-08042 ? 18 ft. lbs. {25 N?m, 255 kgf?cm} ? 90170-08036 ? 28 ft. lbs. {37 N?m, 378 kgf?cm} Vehicles produced between 8/2015 through 5/12/2017 should be equipped with 90170-08042. Vehicles produced 5/18/2017 and after should be equipped with 90170-08036.
T-TT-0490-18
Service Bulletin/Repair Instructions
TT: Some vehicles may exhibit a squeak or rattle noise from the FR RH Body Mount Bushing when driving over uneven roads or bumps. Make sure to confirm that noise is coming from RH FR (No.1) Body Mount Bushing before proceeding.
T-SB-0279-17-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE March 16, 2018 Rev1: ? Applicability has been updated to include 2018 model year vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0103-16 and T-SB-0337-17. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0103-16 and T-SB-0337-17 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2016 ? 2018 model year vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (version 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ? Head unit reboots at a specific location ? Abnormal Destination Search app operation ? Rebooting caused by no songs on the USB-connected iPhone ? A one-time reboot after ignition is cycled to ACC-ON ? Audio stays muted after the key is cycled
T-TT-0484-18 Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
T-SB-0016-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma, 2017 model year Sienna and Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit a chirping noise from the high-pressure fuel pump. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0186-12_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 21, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2017 model year Tacoma vehicles. ? The Parts Information and Repair Procedure sections have been updated. September 10, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year Tacoma vehicles. ? The Warranty Information, Parts Information, and the Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. TC004-06. ? Applicability has been updated to include 2007 ? 2012 model year Tacoma vehicles. ? The Repair Procedure section has been updated. Service Bulletin No. TC004-06 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2005 ? 2017 model year Tacoma vehicles may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0484-18
Service Bulletin/Repair Instructions
TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
T-SB-0187-12_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum.
T-SB-0013-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma Double Cab 4WD vehicles equipped with a BD22 rear differential may exhibit a whine type noise from the rear of the vehicle. This condition may occur while driving around 50 mph at constant speed, slight acceleration, or slight deceleration and may be caused by rear differential vibration transferring through the chassis and body. Follow the Repair Procedure in this bulletin to address this condition. APPLICABLE WARRANTY ? This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle?s in-service date. ? Warranty application is limited to occurrence of the specified condition described in this bulletin.
T-SB-0011-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year Tacoma 4WD vehicles may exhibit a cyclical groaning or grinding noise coming from the front differential in 2WD that is not present during 4WD operation. Follow the Repair Procedure in this bulletin to address this condition. APPLICABLE WARRANTY ? This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from the vehicle?s in-service date. ? Warranty application is limited to occurrence of the specified condition described in this bulletin.
T-SB-0009-18
Service Bulletin/Repair Instructions
TSB: The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather and synthetic leather care in Toyota vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care.
T-SB-0170-16_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE January 22, 2018 Rev1: ? Applicability has been updated to include 2016 - 2017 model year Tacoma vehicles. ? The Warranty Information, Parts Information, and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2012 - 2017 model year Tacoma vehicles may exhibit a reed/buzz type wind noise from the LH and/or RH front door when driving in high cross-wind areas. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0475-18
Service Bulletin/Repair Instructions
TT: In the event that injector seal repair is required on vehicles equipped with a direct injection fuel system, a Special Service Tool Set is required to properly install the seal onto the injector. As new vehicle configurations have been released, several injector seal tool sets have been distributed to accommodate these new vehicles. There are a total of three injector seal tool sets for Toyota models, located in the appropriate SST cabinets. Each kit contains multiple pieces as shown in the diagram below. The individual pieces must remain together to ensure these tools are used correctly. Refer to the repair manual for the tool information to ensure the correct tool is used for the desired application.
TSR-1212-17
Service Bulletin/Repair Instructions
Technician Certification Requirements.
T-TT-0375-15_Rev
Service Bulletin/Repair Instructions
TT: For customer concerns of no or poor outgoing sound from the Bluetooth systems there are diagnostics in the repair manual which can be performed to diagnose the condition.
T-TT-0377-15_Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience poor outgoing Bluetooth sound quality, this can occur for various reasons. Current multimedia systems are designed with the ability to adjust Bluetooth sound quality to compensate for Echo or excessive background noise.
T-SB-0229-12_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
T-SB-0316-17
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma, 2017 model year Sienna and Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump. Follow the Repair Procedure below to address this condition.
T-SB-0313-17
Service Bulletin/Repair Instructions
TSB: Some 2015 ? 2018 model year Toyota vehicles may exhibit brake vibration due to improper lug nut torque. Brake vibration can occur at any time if improper torque is applied to lug nuts. Even one lug nut over or under torqued can cause vibration.
T-SB-0134-16_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU's information.
T-SB-0304-17
Service Bulletin/Repair Instructions
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
T-TT-0339-15_Rev
Service Bulletin/Repair Instructions
TT: Some vehicles may exhibit an error message when trying to perform a radio software update: "Unable to update the software. Please try again later." If the following screen is seen; follow the directions below.
T-SB-0103-16_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE September 12, 2017: This bulletin is now obsolete. Please see T-SB-0279-17.
T-SB-0279-17
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0103-16. The entire bulletin has been updated. Service Bulletin No. T-SB-0103-16 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding.
T-SB-0171-16_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE September 1, 2017 Rev1: Applicability has been updated to include 2017 model year Tacoma vehicles. The Introduction, Production Change Information, and Repair Procedure sections have been updated. Some 2016 ? 2017 model year Tacoma vehicles equipped with an automatic transmission may exhibit a vibration felt in the seat, floorboard, and/or steering wheel between 10 ? 30 mph caused by a driveline vibration under deceleration. NOTE This Service Bulletin ONLY applies to 4WD models equipped with 6AT. Do NOT use the spring part number found in the Service Bulletin for any manual transmission vehicles or PreRunner models. This could lead to NEW, non-existing issues. If the vehicle has an aftermarket suspension/body lift or leveling kit installed, this bulletin does NOT apply.
T-SB-0273-17
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma vehicles may exhibit a squeak noise from the rear leaf spring when traveling over speed bumps or with movement from loading and unloading the suspension. Follow the Repair Procedure below to address this condition.
SET-TSB-17-007
Service Bulletin/Repair Instructions
Southeast Toyota Accessory LED Fog & DRL 2 in 1 light inoperative. Provide Accessory lamp diagnostics and manufacturing date inspection information.
T-SB-0218-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.
T-SB-0237-17
Service Bulletin/Repair Instructions
TSB: Some 2016 - 2017 model year Tacoma vehicles, after being parked for an extended period of time in inclement winter weather, may exhibit an intermittent or abnormal windshield wiper operation when initially turned on due to snow or sleet accumulation under the cowl louver.
T-SB-0222-17
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma vehicles equipped with a tonneau cover now have a replacement strap available (see Figure 1). Previously, if the strap was cut or damaged, it was a non-serviceable part. APPLICABLE WARRANTY ? This repair is covered under the Toyota Basic Warranty. This warrantyis in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle's in-service date. ? Warranty application is limited to occurrence of the specified condition described in this bulletin
T-TT-0441-17
Service Bulletin/Repair Instructions
TT: During previous air conditioning service, leakage prevention agent (A/C stop leak) may have been added to the A/C system. Adding stop leak products to the A/C system is not a recommended or approved Toyota repair process. During A/C service, moisture enters the A/C system, and can react with the previously added A/C stop leak, forming a gelatinous substance. The gel substance that forms can cause the A/C compressor to bind and or seize.
T-SB-0103-16
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE: April 4, 2017 Rev2: Applicability has been updated to include 2017 model year Prius Prime vehicles. The Introduction has been updated to include new software changes. Some 2016 ? 2017 model year applicable vehicles equipped with Entune? Audio (version 01013E) / Entune? Audio Plus (version 010156 or 01015C) / Entune? Premium Audio (version 010171 or 010170 or 01017D) may exhibit one or more of the following conditions: ? Head unit rebooting at a specific location. ? Abnormal destination search operation. ? Rebooting caused by no songs on the USB connected iPhone. ? One time reboot after ACC-ON. ? Audio stays muted after the key is cycled.
T-TT-0437-17
Service Bulletin/Repair Instructions
TT: Some customers may experience greyed out buttons or inactive screens (lockouts) while driving. This is to promote safe driving practices and reduce the amount of distractions while driving. These lockouts can?t be deactivated or defeated through any settings. The following is a list of common lockouts, however, this is not a complete list of lockouts.
T-TT-0429-16 Rev
Service Bulletin/Repair Instructions
TT: ?16-17MY Tacoma customers may complain about a squeak noise from rear leaf springs when vehicle experiences any up and down movement. Sand, dirt and/or debris may enter the space between the silencer pad and contact surface of the leaf spring. When the vehicle rear suspension experiences any movement, friction is caused between the silencer pad and spring components, which may result in a squeak noise.
T-TT-0435-17
Service Bulletin/Repair Instructions
TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory.
T-SB-0186-17
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2017 model year Tacoma vehicles equipped with the 6 speed manual transmission (RC62F) may exhibit a high pitch whine noise when driving in 5th or 6th gear. A NEW heat insulator is available to address this condition.
TSB005316 Rev1
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE January 31, 2017 Rev1: Applicability has been updated to include 2017 model year Tacoma vehicles. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2017 model year Tacoma vehicles may exhibit a howling or whistling noise from the front lower control arms at speeds of about 25 ? 45 mph. The noise may be more noticeable when cross winds are present. Follow the procedure in this bulletin to address this condition.
TSB018217
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
T-SB-0012-13 Rev
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE: September 14, 2016: This bulletin is now obsolete. Please see T-SB-0134-16.
T-SB-0077-16 Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 15, 2016 Rev1: The Applicability, Introduction, Parts Information, and Calibration Information sections have been updated. Any previous printed versions of this bulletin should be discarded.
T-TT-0315-14 Rev
Service Bulletin/Repair Instructions
TT: Chrometec (plastic clad) wheels are being damaged during mounting and dismounting of tires.
T-TT-0424-16
Service Bulletin/Repair Instructions
TT: Front Brake Vibration Key Points: * Issue can occur at any time if improper torque is applied on lug nuts * Over time, even one lug nut over or under torqued, can cause a vibration issue * When lug nuts are over torqued, this causes the rotor to have a runout out condition which can lead to brake vibration concerns * Brake vibration issues can occur at parking lot to highway speeds * Brake vibration issues can occur at light to moderate braking * Tightening lug nuts in a star pattern method during the torqueing process will assure that even/equal pressure is applied across the rotor hub surface * Torque sticks/wrenches should be used to apply accurate torque values when tightening * Do Not use impact guns/ratchets to completely run lug nuts up to the wheel surface
T-SB-0148-16
Service Bulletin/Repair Instructions
TSB: Some 2016 model year Tacoma vehicles may exhibit a condition where the trip meters may intermittently reset. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0103-16 Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE October 14, 2016 Rev1: Applicability has been updated to include 2017 model year Prius V vehicles. Any previous printed versions of this bulletin should be discarded.
T-TT-0309-14 Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience Bluetooth disconnections or loss of SMS text message functionality on the navigation/audio system with Android phones running OS 4.4 or later. Condition tends to occur to customers who have many previous text messages on their phones.
T-SB-0134-16
Service Bulletin/Repair Instructions
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
T-TT-0414-16
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: *Difficulty to pair the phone. *Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. *Various Bluetooth® Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls.
T-SB-0088-16
Service Bulletin/Repair Instructions
TSB: Some 2016 model year Tacoma vehicles equipped with a 2GR engine and 6 speed manual transmission may exhibit difficulty when shifting out of 5th or 6th gear after driving for an extended period of time. Follow the Repair Procedure in the bulletin to address this condition.
Safety Recall an
Service Bulletin/Repair Instructions
Update on Technician Certification Requirements.
T-SB-0077-16
Service Bulletin/Repair Instructions
TSB: Some 2016 model year Tacoma vehicles equipped with the 2GR engine and the AC60 6-speed automatic transmission may exhibit one or more of the following shift feeling concerns: *Delayed engagement Park to Drive or Reverse to Drive. *Harsh 1st - 2nd upshift. *Delayed upshift when using cruise control. The Engine Control Module (ECM, SAE term: Powertrain Control Module/PCM) calibration has been revised to address this condition.
PC-06.10.2016
Service Bulletin/Repair Instructions
TAP has identified the potential for routing issues that allow the ABS wire to be pinched between its retention bracket and the coil spring at full steering lock.
T-TT-0399-16
Service Bulletin/Repair Instructions
TT: Multimedia systems reset procedure should be performed when the multimedia system no longer responds or reboots itself.
T-TT-0398-16
Service Bulletin/Repair Instructions
TT: In some 2016 MY Tacoma vehicles, customers may experience a vibration feeling when braking or on deceleration. This can occur at various speeds or pedal application forces.
T-SB-0053-16
Service Bulletin/Repair Instructions
Howling or whistle noise from front lower control arms.
T-SB-0044-16
Service Bulletin/Repair Instructions
TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.
T-TT-0394-16
Service Bulletin/Repair Instructions
TT: Some customers may experience a stuck in 4HI or 4LO condition due to a damaged transfer case actuator. After replacing the actuator, the normal operating condition is restored. Investigation of recovered parts show that damage is due to improper shifting pattern from N to D during 4LO entering/exiting operation.
T-TT-0392-16 REV
Service Bulletin/Repair Instructions
TT: SOME CUSTOMERS MAY EXPERIENCE BLUETOOTH CONNECTION ISSUES AFTER UPDATING THE ANDROID OPERATING SYSTEM TO 5.X.X (LOLLIPOP) OR LATER.
T-TT-0392-16 Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience Bluetooth connection issues after updating the Android Operating System to 5.x.x (Lollipop) or later.
T-TT-0392-16
Service Bulletin/Repair Instructions
TT: Some customers may experience Bluetooth connection issues after updating the Android Operating System to 5.x.x (Lollipop) or later.
T-TT-0390-16
Service Bulletin/Repair Instructions
TT: Some vehicles may exhibit a fluid leak from the rear differential carrier to axle housing gasket. The differential may exhibit noise or the fasteners may be loose.
T-TT-0339-15
Service Bulletin/Repair Instructions
TT: Some vehicles may exhibit an error message when trying to perform a radio software update: "Unable to update the software. Please try again later." If the following screen is seen, follow the directions below.
T-TT-0268-13 REV
Service Bulletin/Repair Instructions
TT: SOME CUSTOMERS MAY ENCOUNTER BLUETOOTH CONNECTIVITY CONCERNS SUCH AS: DIFFICULTY PAIRING THE PHONE. INTERMITTENT BLUETOOTH FAILURE TO CONNECT WHEN FIRST TURNING ON THE VEHICLE. VARIOUS BLUETOOTH AUDIO FUNCTIONS ARE NO LONGER FUNCTIONING WITH THE CUSTOMERS PHONE, SUCH AS THE ABILITY TO CHANGE THE TRACK USING THE STEERING WHEEL CONTROLS. THESE CONCERNS CAN BE CAUSED BY CHANGES MADE ON THE CUSTOMERS PHONE. MAKE SURE TO INQUIRE WITH THE CUSTOMER IF THE CONNECTIVITY CONCERNS OCCURRED AFTER RECEIVING AN OPERATING SYSTEM UPDATE ON THEIR PHONE OR IF THEY HAVE RESTORED THEIR PHONE DATA/SETTINGS RECENTLY.
TTT-0268-13 Rev3
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth connectivity concerns such as: ? Difficulty pairing the phone. ? Intermittent Bluetooth failure to connect when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with the customer?s phone, such as the ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
T-TT-0385-16
Service Bulletin/Repair Instructions
Tech Tip: This Tech Tip is being provided to bring attention to the new location of the Entune/NAV/Map Update and Upgrade USB Directory. Click on the TIS tab, Diagnostics tab, Telematics tab, and the document is now located under the reference documents sections. This change has occurred to help speed up the updating process of this document.
T-SB-0010-16
Service Bulletin/Repair Instructions
TSB: Some 2016 model year Tacoma vehicles equipped with Blind Spot Monitor may exhibit a Blind Spot Monitor Warning message with Diagnostic Trouble Code (DTC) C1AB2 Short to GND in Outer Mirror Indicator (Master) or C1AB3 Short to GND in Outer Mirror Indicator (Slave) stored. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0381-16
Service Bulletin/Repair Instructions
Tech Tip: Some customers may experience difficulty programming HomeLink.
T-SB-0124-15
Service Bulletin/Repair Instructions
A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State of Charge (SOC) of the vehicle?s battery while in stock and assure proper State of Charge (SOC) at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, all dealers should check battery State of Charge (SOC) and recharge, if necessary, within 48 hours of delivery to customers.
T-TT-0375-15
Service Bulletin/Repair Instructions
TT: For customer concerns of no or poor outgoing sound from the Bluetooth systems there are diagnostics in the repair manual which can be performed to diagnose the condition.
T-TT-0376-15
Service Bulletin/Repair Instructions
TT: TMS has discovered the current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. In order to avoid this condition, technicians should raise engine RPM when changing from Direct Injection active test to Port Injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2GR-FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
T-TT-0377-15
Service Bulletin/Repair Instructions
TT: Some customers may experience poor outgoing Bluetooth sound quality, this can occur for various reasons. Current multimedia systems are designed with the ability to adjust Bluetooth sound quality to compensate for Echo or excessive background noise.
T-SB-0110-15
Service Bulletin/Repair Instructions
TSB: Some 2015 model year Tacoma and 4Runner vehicles equipped with a 1GR-FE engine may exhibit a MIL "ON" condition with Diagnostic Trouble Code (DTC) P011B - Engine Coolant Temperature / Intake Air Temperature Correlation - when no part malfunction is present. The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition occurring. Use the following repair procedure to address this condition.
T-SB-0104-15
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying your dealership's new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ? Careful inspection for paint chips/scratches and body dents/dings. ? Proper operation of electrical accessories (including interior light, clock, and radio reset). ? Interior cleanliness. ? Proper function of mechanical systems. Customer retention and proper maintenance of vehicles has been a major focus for Toyota and Scion. To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change
T-TT-0370-15
Service Bulletin/Repair Instructions
TT: The 2016 MY Tacoma A/C System uses a new 1234yf refrigerant. The HVAC under hood label and label on the A/C compressor specifies the use of PS-D1 oil. However, the Repair Manual references the use of ND-12 oil for the A/C Compressor.
T-SB-0028-14
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle's systems and components. Any problems that are found should be corrected immediately.
T-TT-0309-14 REV
Service Bulletin/Repair Instructions
TT: SOME CUSTOMERS MAY EXPERIENCE BLUETOOTH DISCONNECTIONS OR LOSS OF SMS TEXT MESSAGE FUNCTIONALITY ON THE NAVIGATION/AUDIO SYSTEM WITH ANDROID PHONES RUNNING OS 4.4 OR LATER. CONDITION TENDS TO OCCUR TO CUSTOMERS WHO HAVE MANY PREVIOUS TEXT MESSAGES ON THEIR PHONES.
T-TT-0368-15
Service Bulletin/Repair Instructions
TT: Some vehicles equipped with the bed tonneau cover may exhibit a condition in which hinge cover(s) are not flat when in the closed position. Gap from hinge cover to tonneau cover should be no more than 0 -1mm.
T-TT-0364-15 Rev
Service Bulletin/Repair Instructions
TT: Some customers may complain of a ticking sound originating from the engine compartment at idle.
T-TT-0364-15
Service Bulletin/Repair Instructions
TT: ? Some customers may complain of a ticking sound originating from the engine compartment at idle. ? This condition is most noticeable when at least one of the following conditions are met: o One or more of the vehicle?s windows are rolled down o The vehicle is idling next to a large object, i.e. a wall or another vehicle o The customer is navigating a drive-thru
T-SB-0079-15
Service Bulletin/Repair Instructions
TSB: Some 2016 model year Tacoma vehicles equipped with the 2TR-FE engine and the AC60 6-speed automatic transmission may exhibit a flare during the 2-3 up shift. Customers may describe this as a momentary Automatic Transmission slipping feeling. The Engine Control Module (ECM, SAE term: Powertrain Control Module/PCM) calibration has been revised. Use the following Repair Procedure to address this condition.
T-SB-0026-14 REV
Service Bulletin/Repair Instructions
TSB: DURING THE MANUFACTURING PROCESS TIRES ARE MOUNTED ON THE VEHICLE AS MATCHED SETS TO HELP REDUCE CONDITIONS SUCH AS PULLING OR DRIFTING. IF THE WHEELS ARE REPLACED OR REFINISHED BEFORE VEHICLE DELIVERY, IT IS IMPORTANT THAT THE TIRES REMAIN ON THE VEHICLE IN THE SAME LOCATION AND IN THE SAME DIRECTION OF ROTATION. PLEASE REFER TO THE FOLLOWING PROCEDURE TO ENSURE THAT THE ORIGINAL TIRES STAY IN THE SAME LOCATION ON THE VEHICLE.
T-SB-0026-14 Rev
Service Bulletin/Repair Instructions
TSB: During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Please refer to the following procedure to ensure that the original tires stay in the same location on the vehicle.
T-TT-0344-15 REV
Service Bulletin/Repair Instructions
TT: IPHONE TEXT MESSAGES DO NOT APPEAR ON MULTIMEDIA DIS[PLAY.
TTT-0344-15 Rev1
Service Bulletin/Repair Instructions
TT: iPhone text messages do not appear on multimedia dis[play.
T-TT-0360-15
Service Bulletin/Repair Instructions
TT: Customers may experience connectivity issues when the following conditions are met: The customer's iPhone is operating on iOS9 firmware. The customer's iPhone is connected to the vehicle via Bluetooth. The customer may complain of the following issues: When receiving two incoming calls simultaneously, both calls are ended automatically. iTunes Radio app does not play via Bluetooth audio. Podcast and Audiobook media playback is inoperative via Bluetooth audio.
T-SB-0072-15
Service Bulletin/Repair Instructions
TSB: Certain 2016 model year Tacoma vehicles are equipped with a compass in the rear view mirror. Use the following procedure to complete initial calibration of the compass during Pre-Delivery Service (PDS). There are two types of mirrors that are equipped with a compass (Type A and Type B). Determine which type the vehicle is equipped with and follow the calibration procedure for that mirror.
T-SB-0073-15
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying your dealership's new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: * Careful inspection for paint chips/scratches and body dents/dings. * Proper operation of electrical accessories (including interior light, clock, and radio reset). * Interior cleanliness. * Proper function of mechanical systems. Customer retention and proper maintenance of vehicles has been a major focus for Toyota and Scion. To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection & Cleaning.") A new PDS Check Sheet has been developed for the 2016 model year Tacoma. Some check points have been added, expanded, or clarified. Bulletins are available for items in bold type.
T-SB-0074-15
Service Bulletin/Repair Instructions
TSB: Pre-Delivery Service (PDS) is a critical step in satisfying your dealership's new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: * Careful inspection for paint chips/scratches and body dents/dings. * Proper operation of electrical accessories (including interior light, clock, and radio reset). * Interior cleanliness. * Proper function of mechanical systems. Customer retention and proper maintenance of vehicles has been a major focus for Toyota and Scion. To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection & Cleaning.") A new PDS Check Sheet has been developed for the 2016 model year Tacoma. Some check points have been added, expanded, or clarified. Bulletins are available for items in bold type.
T-SB-0029-14 Rev
Service Bulletin/Repair Instructions
TSB: 2015 ? 2016 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate installation procedure to attach the driver?s side, and if applicable, the passenger?s side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips during Pre-Delivery Service (PDS).
T-SB-0043-14 Rev
Service Bulletin/Repair Instructions
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.
T-TT-0344-15
Service Bulletin/Repair Instructions
TT: iPhone text messages do not appear on multimedia display.
T-SB-0025-15
Service Bulletin/Repair Instructions
TSB: While a vehicle is in inventory, the battery is subject to conditions that can reduce its performance and life. Batteries can become discharged due to an extended storage period, temperature, parasitic drain, or while demonstrating vehicle features and benefits in the sales process. Battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As described in this bulletin, operating the engine for 30 minutes after 60 days in storage and every 30 days thereafter will help to maintain battery State of Charge (SOC). This process supplements other movements of the vehicle as it is staged, and has specific restrictions on how maintenance is to be done. Also described in this bulletin are 2 other approved methods for maintaining battery State of Charge.
T-SB-0083-13 Rev
Service Bulletin/Repair Instructions
TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
T-SB-0012-13 REV
Service Bulletin/Repair Instructions
TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BULLETIN DETAILS THE TECHSTREAM ECU FLASH REPROGRAMMING PROCESS AND OUTLINES USE OF THE TECHNICAL INFORMATION SYSTEM (TIS) AND THE CALIBRATION UPDATE WIZARD (CUW). FLASH CALIBRATION UPDATES CAN ONLY BE APPLIED TO THE VEHICLE/ECU COMBINATION FOR WHICH THEY ARE INTENDED. ECUS HAVE INTERNAL SECURITY THAT WILL NOT ALLOW THEM TO BE PROGRAMMED WITH ANOTHER ECUS INFORMATION.
TSB-0012-13 Rev2
Service Bulletin/Repair Instructions
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
T-PG007-01
Service Bulletin/Repair Instructions
Replacement vin plates.
T-PG002-91
Service Bulletin/Repair Instructions
Product general information.