CA#9536
Service Bulletin/Repair Instructions
The grey & black tank handle labels are labelled incorrectly. The labels are reversed.
Vehicle report
2018 TRIPLE E RV WONDER
Service bulletins
6 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
CA#9515
Service Bulletin/Repair Instructions
The retainer nuts that hold the locking pin in place on the murphy bed assembly may become loose resulting in the inside toothed washer to not engage. Ensure the bed locks correctly function in preventing the bed from folding into storage mode by lightly pulling up with the pins engaged when being used.
CA#8961
Service Bulletin/Repair Instructions
THE TRUMA AQUA GO COMFORT PLUS WATER HEATER CONTROLLER CABLE IS INCORRECTLY ROUTED THROUGH THE REAR GAS PIPE CONNECTOR OPENING. AFFECTS THE WONDER W24MB ONLY.
CA-8961
Service Bulletin/Repair Instructions
Truma Aqua Go Comfort Plus water heater controller cable is incorrectly routed through the rear gas pipe connector opening.
CA#8956
Service Bulletin/Repair Instructions
THE WIFI EXTENDER ROUTER CABLE IS PLUGGED INTO THE INCORRECT PORT ON THE ROUTER THAT IS INSTALLED ON THE WALL. THE CABLE IS CURRENTLY IN THE POE PORT AND SHOULD BE CONNECTED TO THE ETHERNET PORT. AFFECTS 2018 SERENITY S24CB & 2018 WONDER (ALL MODELS)
CA#8895
Service Bulletin/Repair Instructions
THE SCREWS FASTENING THE LOCKING HINGE TO THE BED BASE ARE INCORRECT. THE SCREW TYPE TO USE ARE 1 1/4" #8 MACHINE SCREWS. TAKE OUT THE ORIGINAL SCREWS AND REPLACE WITH THESE MACHINE SCREWS ON THE UNDERSIDE OF THE BED LID. FROM THE UNDERSIDE OF THE LID, PLACE THE ADJUSTABLE ARM OVER THE THE NEW SCREWS AND INSTALL THE WASHER & NUT. AFFECTS THE WONDER W24FTB ONLY.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.