TSB_2082615_1
Service Bulletin/Repair Instructions
This bulletin provides inormation when the ATF pipes leak; Q7 with 0C8 gearbox.
Vehicle report
2007 AUDI Q7
Service bulletins
387 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
A0023742052680_4
Service Bulletin/Repair Instructions
This bulletin provides information on the additional reporting requirements for safety related inquiries.
DC_Alternator_6
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_4
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_5
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_3
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_2
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_RECALLS
Service Bulletin/Repair Instructions
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
A572200202203210
Service Bulletin/Repair Instructions
This technical service bulletin provides troubleshooting information for the vehicle locking system.
A9122192067783_1
Service Bulletin/Repair Instructions
This bulletin provides information about obtaining a radio code using ODIS.
DC_20220329
Service Bulletin/Repair Instructions
Dealer Communication: Vehicle Sales Reporting, Reinstatement, and Audit Policy
A1722172060750_3
Service Bulletin/Repair Instructions
This bulletin contains instructions for using the UV additive to find engine oil leaks.
A9122752024323_9
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A462226202258411
Service Bulletin/Repair Instructions
This informational bulletin provides diagnostic information for brake conditions.
A192228202530313
Service Bulletin/Repair Instructions
This bulletin contains instructions for identifying and mixing factory fill coolants.
A192227202530312
Service Bulletin/Repair Instructions
This bulletin contains instructions for identifying and mixing factory fill coolants.
A002155201173212
Service Bulletin/Repair Instructions
This bulletin contains general instructions for software updates.
DC 20210928
Service Bulletin/Repair Instructions
Dealer Communication - Vehicle Sales Reporting, Reinstatement, and Audit Policy Update - Effective September 30, 2021
A9121342018187_1
Service Bulletin/Repair Instructions
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
A0021482021205_6
Service Bulletin/Repair Instructions
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
SM 48-2021
Service Bulletin/Repair Instructions
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
A9121042024323_8
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A0021442052680_3
Service Bulletin/Repair Instructions
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage).
A1021222018288_9
Service Bulletin/Repair Instructions
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
A9021032058077_5
Service Bulletin/Repair Instructions
This bulletin contains instructions for determining unexpected Audi presense interventions.
ELSAallignAudi
Service Bulletin/Repair Instructions
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
A4021242016453_4
Service Bulletin/Repair Instructions
This bulletin contains instructions for determining if bushings need to be replaced.
A5721752022032_9
Service Bulletin/Repair Instructions
This technical service bulletin provides troubleshooting information for the vehicle locking system.
A9121862062713_1
Service Bulletin/Repair Instructions
This bulletin contains repair instructions for when there is radio static when the rear heater is active.
A4621252054385_2
Service Bulletin/Repair Instructions
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill).
A462123202258410
Service Bulletin/Repair Instructions
This informational bulletin provides diagnostic information for brake conditions.
A1721122060750_2
Service Bulletin/Repair Instructions
This bulletin contains instructions for using the UV additive to find engine oil leaks.
A9121642024323_7
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
SM C-2020
Service Bulletin/Repair Instructions
This special notice is to inform dealers to return the part numbers listed (State of California only).
A1720112060750_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for using the UV additive to find engine oil leaks.
21AUTIRECHAINS
Service Bulletin/Repair Instructions
Added new graphic to reflect where to find MY 21 information
Audi Part Labels
Service Bulletin/Repair Instructions
Recall Reminder Part Labels
A1720062028440_5
Service Bulletin/Repair Instructions
This informational bulletin explains when the range display is empty in the on-board computer.
A1920042025303_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for identifying and mixing factory fill coolants.
A0020382039206_3
Service Bulletin/Repair Instructions
This informational bulletin contains instructions on how to use the QR code in a TSB.
A9120702044694_2
Service Bulletin/Repair Instructions
This technical service bulletin provides troubleshooting for issues with the navigation map database.
A0020362002047_1
Service Bulletin/Repair Instructions
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
A012054201475311
Service Bulletin/Repair Instructions
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A012046201475310
Service Bulletin/Repair Instructions
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A912039201818711
Service Bulletin/Repair Instructions
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
A9420192058420_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for verifying if there is outside influence or if the technician should carry on with standard diagnosis.
A9419182012749_1
Service Bulletin/Repair Instructions
Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008 S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
20AUTIRECHAINS
Service Bulletin/Repair Instructions
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
SM 95-2019
Service Bulletin/Repair Instructions
The part number listed in the document are to be returned.
A4019972018194_9
Service Bulletin/Repair Instructions
This bulletin contains repair instructions for leaking shock absorbers.
A0019262052680_2
Service Bulletin/Repair Instructions
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage.
ATUBody2019
Service Bulletin/Repair Instructions
Body components - Examples of customer misuse
ATUChassis2019
Service Bulletin/Repair Instructions
Wheel change mode/jacking mode - Description and usage
A0019252011732_1
Service Bulletin/Repair Instructions
00 Software Version Management (SVM), operating instructions
A9119882024323_6
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A3919252016880_8
Service Bulletin/Repair Instructions
This bulletin contains repair instructions for when there are leaks around the transfer case area.
A1719982028440_4
Service Bulletin/Repair Instructions
This informational bulletin explains when the range display is empty in the on-board computer. Also A3 Cabriolet 2015-2021, A3 Sportback 2016-2018, 2005 A4 Cabriolet , 2005-2009 S4 Cabriolet, 2010-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 S6, 2005 and 2006 A7, 2005-2011 and 2021 S7 2005-2006 and 2021 S8, 2019-2021 E-Tron Quattro
AWC 19-05
Service Bulletin/Repair Instructions
This communication is issued to inform dealers of updated shipping regulations related to lithium ion batteries.
A3919242016880_7
Service Bulletin/Repair Instructions
This bulletin contains repair instructions for when there are leaks around the transfer case area.
AWC 19-04
Service Bulletin/Repair Instructions
This communication is issued to remind dealers of the repair validation process for repair group 19. 2005-2019 A3, 1996-2019 A4, 2008-2019 A5, 1992-2019 A6, 2012-2019 A7, 1997-2019 A8, 2019 E-Tron, 2015-2019 Q3, 2010-2019 Q5, 2007-2019 Q7, 2019 Q8, 2000-2019 TT, 2008-2018 R8
A4819792028220_8
Service Bulletin/Repair Instructions
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by outside influence is not covered under warranty. 2008-2020 A3, 2015-2020 A3 Cabrio, 2005-2016 A3 Sportback, 2005-2020 A4, 2010-2020 A4 allroad, 2005-2012 A4 Avant, 2005-2009 A4 Cabrio, 2010-2020 A5 Cabrio, 2008-2020 A5 Coupe, 2018-2020 A5 Sportback, 2005-2020 A6, 2005-2011 A6 Avant, 2008-2020 A7, 2005-2020 A8, 2008-2019 e-tron, 2019-2020 e-tron quattro, 2015-2020 Q3, 2009-2020 Q5, 2007-2020 Q7, 2019-2020 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2007-2008 RS4, 2008 RS4 Cabrio, 2010-2020 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2004-2012 S4, 2004-2009 S4 Cabrio, 2010-2020 S5 Cabrio, 2008-2020 S5 Coupe, 2018-2020 S5 Sportback, 2007-2020 S6, 2008-2020 S7, 2007-2009 S8, 2018-2020 SQ5, 2004-2020 TT Coupe, 2004-2020 TT Roadster, 2012 TT/RS Coupe
A9119652050565_2
Service Bulletin/Repair Instructions
This bulletin contains general software update instructions for vehicles with PR Code 7UH. 2016-2020 A3, 2016-2020 A3 Cabrio, 2016 A3 Sportback, 2016-2020 A4, 2016-2020 A4 allroad, 2016-2012 A4 Avant, 2016-2020 A5 Cabrio, 2016-2020 A5 Coupe, 2018-2020 A5 Sportback, 2016-2020 A6, 2016-2020 A7, 2016-2020 A8, 2016-2020 e-tron, 2019-2020 e-tron quattro, 2016-2020 Q3, 2016-2020 Q5, 2016-2020 Q7, 2016-2020 Q8, 2016-2020 R8 Coupe, 2016-2020 R8 Spyder, 2017-2019 RS3, 2016-2020 RS5, 2016-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2016-2020 S5 Cabrio, 2016-2020 S5 Coupe, 2018-2020 S5 Sportback, 2016-2020 S6, 2016-2020 S7, 2018-2021 SQ5, 2016-2020 TT Coupe, 2016-2020 TT Roadster
A0019212052680_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage). 2008-2021A3, 2015-2021A3 Cabrio, 2005-2016 A3 Sportback, 1999-2021 A4, 2010-2021 A4 allroad, 1999-2012 A4 Avant, 2003-2009 A4 Cabrio, 2010-2021 A5 Cabrio, 2008-2021 A5 Coupe, 2018-2021 A5 Sportback, 1999-2021A6, 1999-2011A6 Avant, 2008-2020 A7, 1999-2021 A8, 2008-2019 e-tron, 2019-2021 e-tron quattro, 2015-2021 Q3, 2009-2021 Q5, 2007-2021 Q7, 2019 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2007-2008 RS4, 2008 RS4 Cabrio, 2010-2021 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2004-2012 S4, 2004-2009 S4 Cabrio, 2010-2021 S5 Cabrio, 2008-2021 S5 Coupe, 2018-2021 S5 Sportback, 2007-2021 S6, 2008-2020 S7, 2007-2009 S8, 2018-2021 SQ5, 2000-2021 TT Coupe, 2001-2021 TT Roadster, 2012 TT/RS Coupe
A571954 20220328
Service Bulletin/Repair Instructions
This technical service bulletin provides troubleshooting information for the vehicle locking system.
ATE-18-24
Service Bulletin/Repair Instructions
ATE-18-24 Audi Q7 Q8 VAS6430_9 Extension
AWA-17-12
Service Bulletin/Repair Instructions
For Audi 3.0 L TDI Generation 2.1 SUV vehicles repaired by the emissions modification recall, the following warranty extension is applicable. ?Extended Emissions Warranty? Limited Warranty Extension The Limited Warranty Extension is applicable to 3.0L TDI vehicles Generation 2.1 SUV with engine code CNRB.
A911743 2042097-
Service Bulletin/Repair Instructions
This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI navigation.
A941791 2012749-
Service Bulletin/Repair Instructions
This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
A911736 2024323-
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A401770 2018194-
Service Bulletin/Repair Instructions
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
SM 44-2017 EN
Service Bulletin/Repair Instructions
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
A171782 2010043-
Service Bulletin/Repair Instructions
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
A431725 2033587-
Service Bulletin/Repair Instructions
This bulletin provides instructions on how to resolve an issue with self-leveling suspension in cold temperatures.
A571738 2017082-
Service Bulletin/Repair Instructions
This informational bulletin contains instructions for sychronizing the remote key after the battery has been disconnected or replaced.
Edition76
Service Bulletin/Repair Instructions
Technical bulletins and updates
ATE-17-05
Service Bulletin/Repair Instructions
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
A441662 2010334-
Service Bulletin/Repair Instructions
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
A43162420335872
Service Bulletin/Repair Instructions
THIS BULLETIN PROVIDES INSTRUCTIONS ON HOW TO RESOLVE AN ISSUE WITH SELF-LEVELING SUSPENSION IN COLD TEMPERATURES.
A941675 2024896-
Service Bulletin/Repair Instructions
The healight switch holder is broken, which causes the healight switch assembly to be loose or fall into the dashboard. The rivets that hold the headlight switch holder in the dashboard can break if the headlight switch is bumped (by driver entering vehicle).
A401549 2018194-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 40 number 14-41 dated July 2, 2014. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber As a result of a leak because the shock absorber is damaged. Oil may appear on a shock absorber As a result of residue from when the shock was filled during production, or as a result of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
A911529 2013422-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 13-04 dated September 11, 2013. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
A001578 2021205-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010. VIN plate and/or B-Pillar Safety Certification label requires replacement.
A171568 2028440-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 17 number 14-49 dated April 3, 2014. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
A201559 2011703-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the original tank must be properly flushed to neutralize the remaining gasoline or diesel fuel.
A911526 2042097-
Service Bulletin/Repair Instructions
The traffic feature in the MMI navigation is inoperative. If the vehicle is a model year 2016 A6 or A7, see TSB 2042013: 91 Audi connect online destination search, Google Earth navigation view, or INRIX online traffic is not available. There is a known server issue that can only be resolved through a change to the Audi AG backend server. Audi has changed traffic providers over the years as new technologies have developed. This bulletin provides an overview of the different systems and the basic checks that can be performed to diagnose complaints related to traffic in the MMI navigation system.
ATE-15-24
Service Bulletin/Repair Instructions
This circular contains important information regarding tooling for the new Audi Q7. Audi of America is pleased to inform you of the release and automatic delivery of the Audi Q7 Minimum Required Tools (MRT) Shipment.
A461525 2022584-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 46 number 14-86 dated July 14, 2014. DO NOT use this TSB if there is another TSB for same concern applicable to the VIN. This TSB is only intended for diagnostic purposes and does not serve as a guideline for determining warrantable conditions. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. driving style, environmental conditions, and service history of the vehicle. Additionally, as brake pads and discs wear, their dampening ability is reduced. Disc thickness variation (DTV) is a common condition that contributes to brake pulsation. DTV occurs when the two braking surfaces of the brake disc are no longer parallel to each other. This condition cannot be accurately measured with normal workshop tools.
A961501 2019260-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink® opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
2017266/9
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A481567 2017266-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 14-62 dated September 23, 2014. Electrically-adjustable steering column adjustment is restricted and does not adjust vertically. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently does not work, for more information. Seat adjustments can be used to maintain the 10-inch minimum recommended distance from the steering wheel in case of airbag deployment. The axial adjustment is still functional during this condition. The steering column may be under tension due to unfavorable tolerances of the steering column and module cross carrier. As a result, the current draw of the regulator motors is above specification, which causes the electric steering column adjustment to fail. Once the vehicle electrical system control module, J519 (address word 09), detects an excessive current draw, the basic settings will be erased. If basic settings are not stored in the vehicle electrical system control module, the module will not send voltage/current to the motor to operate the vertical adjustment.
A191562 2025303-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A9615002027416-6
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 96 number 14-85 dated July 24, 2014. The sunglass holder in the dome light assembly will not latch closed or is stuck closed. The condition may be intermittent. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
A1915612025303-5
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
SB-01-15-29
Service Bulletin/Repair Instructions
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
A911598 2018187-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
A871564 2010146-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
A971548 2013504-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
A871563 2010146-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 87 number 14-54 dated August 28, 2014. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
A901554 2040593-
Service Bulletin/Repair Instructions
Customer reports that the ignition sporadically cannot be switched on. DTC 00456 (Access/start control module -J518- no communication) is found in several control modules or the access/start authorization control module, J518 (address word 05), identifies itself with implausible data can be found through guided fault finding (GFF). If no communication is possible, activate the bus by switching on the hazard warning lights. It should now be possible to carry out a diagnosis. If DTC 00288 (Steering column lock actuator-N360, faulty) is logged in the access/start authorization control module, J518 (address word 05), this bulletin does not apply. Proceed according to GFF. Incorrect software.
A661552 2035673-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 66 number 15-50 dated April 10, 2015. Customer may report hearing wind noise from the front door area when the vehicle is driven at highway speeds. After diagnosis, it is determined that the source of the wind noise is the exterior rear view mirrors. Throughout the development of the Audi Q5 and Audi Q7, various features have been added to the exterior rear view mirrors. The added features include the turn signal lamp, side assist lamp, perimeter lamp, etc. As the complexity of the exterior rear view mirror increases, the mirrors become more susceptible to wind noise. The two main sources of wind noise from the exterior rear view mirrors are: the seam surrounding the turn signal lamp and the seam at the mirror base. The modifications explained in the Service section of this bulletin will effectively mitigate the wind noise symptom for the customer.
A941565 2012749-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
A661550 2035673-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 66 number 13-39 dated December 9, 2013. Customer may report hearing wind noise from the front door area when the vehicle is driven at highway speeds. After diagnosis, it is determined that the source of the wind noise is the exterior rear view mirrors. The two main sources of wind noise from the exterior rear view mirrors are: the seam surrounding the turn signal lamp and the seam at the mirror base. The modifications explained in the Service section of this bulletin will effectively mitigate the wind noise symptom for the customer.
A911579 2038824-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
A101511 2018288-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A011515 2018260-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 14-96 dated September 26, 2014. The MIL is on. A number of DTC entries with regard to the throttle valve are stored in the engine control module (ECM). In most cases, the entries are sporadic. Contact resistance in the ECM wiring throttle valve.
A911578 2011500-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008. Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
A011514 2014753-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
A171557 2010043-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
A011507 2028344-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
A911472 2024323-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 13-74 dated February 5, 2013. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
00147020392061
Service Bulletin/Repair Instructions
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
A001470 2039206-
Service Bulletin/Repair Instructions
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of ElsaPro. Doing so provides higher-quality videos, more reliable access to the videos, and the ability to view the videos on different devices.
A901451 2021151-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 12-63 dated October 4, 2012. The customer may report flickering of the dash insert lighting, of the A/C control panel lighting, or of the inside light. The condition occurs when the accelerator is pressed while the vehicle is in P or N, or when the vehicle is shifted down when moving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off when the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly-increased voltage, causing the lights to flicker.
Accessories Oper
Service Bulletin/Repair Instructions
This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.
Edition112
Service Bulletin/Repair Instructions
Technical bulletins and updates
A911469 2038824-
Service Bulletin/Repair Instructions
The following message appears on the MMI display: ?Device or cable type not supported?. The ?Device or cable type not supported? message may be displayed when the wrong AMI cable type is used. See the Service section of this bulletin for an overview of the AMI cables that support iOS devices.
Edition110
Service Bulletin/Repair Instructions
Technical bulletins and updates
44145520103346
Service Bulletin/Repair Instructions
Tightening wheel bolts
48146320282204
Service Bulletin/Repair Instructions
Steering wheel leather damage, all vehicles
A481463 2028220-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 13-54 dated September 13, 2013. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
A441455 2010334-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
Edition106
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
01149520384341
Service Bulletin/Repair Instructions
Software update needed.
01149620182608
Service Bulletin/Repair Instructions
Technical Service Bukketein.
2038434/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011495 2038434-
Service Bulletin/Repair Instructions
The MIL is on. DTCs are stored in the engine control module (ECM), J623 (address word 01). Software update needed.
A011496 2018260-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 13-76 dated March 14, 2013. MIL on. A number of incident memory entries with regard to the throttle valve are stored in the engine control module (ECM), J623 (01). In most cases, the entries are sporadic. Contact resistance in the ECM wiring ? throttle valve.
48146220172668
Service Bulletin/Repair Instructions
Electric steering column adjustment is inoperative
A481462 2017266-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 14-59 dated June 2, 2014. Electrically-adjustable steering column adjustment is restricted and does not adjust vertically. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. Seat adjustments can be used to maintain the 10-inch minimum recommended distance from the steering wheel in case of airbag deployment. The axial adjustment is still functional during this condition.
A641436 2020552-
Service Bulletin/Repair Instructions
Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Edition102
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
A001467 2002047-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
Edition96
Service Bulletin/Repair Instructions
Technical bulletins and updates
Edition96-1
Service Bulletin/Repair Instructions
i-wire new wiring diagram application
96148520274165
Service Bulletin/Repair Instructions
Sunglass holder will not close
A961485 2027416-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 96 number 13-61 dated May 28, 2013. The sunglass holder in the dome light assembly will not latch closed. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
A571402 2022032-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 13-97 dated October 29, 2013. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
001465201173210
Service Bulletin/Repair Instructions
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
A001465 2011732-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 00 number 12-32 dated February 7, 2012. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
46148620225845
Service Bulletin/Repair Instructions
Brake pulsation diagnostic guidelines
A461486 2022584-
Service Bulletin/Repair Instructions
Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes.
A911450 2018187-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 13-02 dated August 30, 2013. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
AUD4927ENG
Service Bulletin/Repair Instructions
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
4014412018194
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
40144120181946
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
A401441 2018194-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 40 number 13-34 dated September 23, 2013. Oil appears on one or several shock absorbers.
2036482/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A911448 2036482-
Service Bulletin/Repair Instructions
The volume of the radio, navigation announcements, or output of the Bluetooth telephone system changes when the ignition is switched off, then switched back on, the volume is muted, then unmuted, and the MMI is switched off by a long press of the volume knob, then restarted without an ignition cycle. All vehicles with MMI 2G/3G/3G+/MIB Navigation are affected.
Edition92
Service Bulletin/Repair Instructions
Idenifying and mixing factory fill engine coolants
A191450 2025303-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Edition90
Service Bulletin/Repair Instructions
Technical bulletins and updates
Edition89
Service Bulletin/Repair Instructions
ElsaPro Software update and technical bulletins
48145920172667
Service Bulletin/Repair Instructions
Electric steering column adjustment is inoperative
A481459 2017266-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 13-51 dated August 30, 2013. Electrically-adjustable steering column adjustment is restricted and does not adjust vertically. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently does not work, for more information. Seat adjustments can be used to maintain the 10-inch minimum recommended distance from the steering wheel in case of airbag deployment. The axial adjustment is still functional during this condition. The steering column may be under tension due to unfavorable tolerances of the steering column and module cross carrier. As a result, the current draw of the regulator motors is above specification, which causes the electric steering column adjustment to fail. Once the vehicle electrical system control module, J519 (address word 09), detects an excessive current draw, the basic settings will be erased. If basic settings are not stored in the vehicle electrical system control module, the module will not send voltage/current to the motor to operate the vertical adjustment.
TSB-48-14-62
Service Bulletin/Repair Instructions
AUDI: ELECTRICALLY ADJUSTABLE STEERING COLUMN ADJUSTMENT FAILS TO ADJUST VERTICAL AND IS RESTRICTED AND UNDER TENSION DUE TO MODULE CROSS CARRIER AND UNFAVORABLE TOLERANCES TO STEERING COLUMN. MODEL 2003-2010 A8, 2005-2011 A6, 2007-2014 Q7. *PE
37 13 07 2033658
Service Bulletin/Repair Instructions
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
37 14 30 2003658
Service Bulletin/Repair Instructions
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
37143020036586
Service Bulletin/Repair Instructions
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
A371430 2003658-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Update91i8
Service Bulletin/Repair Instructions
Google Maps Street View (NVLW))
2031413/2
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A571401 2031413-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 12-78 dated October 26, 2012. The seat memory does not work. The MMI displays a message that the memory function is not active. The seat memory control unit can be deactivated due to voltage fluctuations in the vehicle?s power system, or from a large static discharge through the seat cover. If the seat memory control unit is deactivated due to either of these influences, the control unit cannot be reactivated through any vehicle controls, vehicle keys, or through the normal GFF test plans. It can only be reactivated with special test plans within the tester.
27 14 24 2025360
Service Bulletin/Repair Instructions
Low battery charge: Diagnosis tips and TAC instructions
A271424 2025360-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 27 number 12-12 dated February 28, 2012. Customer may report that the vehicle does not start due to a discharged battery. The vehicle has either a battery diagnostic management control module or a battery energy management control module. This TSB provides basic diagnosis steps for discharged batteries, general tips for working with batteries, and system verification steps to ensure that the vehicle is configured correctly.
A911437 2030947-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 13-92 dated July 16, 2013. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone receives the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call because it assumes that the phone is not responding.
A911435 2026895-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 14-19 dated January 3, 2014. Customer complains that during Bluetooth calls, the person at the other end has trouble hearing the speaker in the vehicle. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
144920284402
Service Bulletin/Repair Instructions
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
A171449 2028440-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 17 number 12-26 dated January 20, 2012. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Edition79
Service Bulletin/Repair Instructions
Technical bulletins and updates
A911429 2026888-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 12-50 dated August 1, 2012. Echo effects, caller on either end cannot hear conversation, sound distortion or feedback, and the sound is distorted, hisses, or scrapes occur during a phone call. This bulletin provides guidelines for analyzing the call quality of the Bluetooth system in the vehicle, and is not applicable to any Audi warranty.
Edition77
Service Bulletin/Repair Instructions
Technical bulletins and updates
A871447 2010146-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 87 number 12-27 dated April 24, 2012. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
A911424 2020399-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 09-30 dated April 14, 2009. The Audi MMI system will not play audio files from an SD card. The MMI system does not recognize the audio files on the SD card. The MMI system reports that the audio files on the SD card are damaged. The audio files on the SD card will play on one Audi vehicle, but will not play on a different Audi vehicle.
Edition69
Service Bulletin/Repair Instructions
Technical bulletins and updates
01145720151069
Service Bulletin/Repair Instructions
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
A011457 2015106-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 24 number 11-06 dated December 7, 2011. The MIL is on. DTCs are stored in the ECM. Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance. Comparing Measured Value Block 103 with 106 is not an accurate method for diagnosing G410. In order to diagnose G410 accurately, use a mechanical gauge and compare results with the low-side fuel pressure Actual Value in Measured Value Block 103.
A461466 2022584-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 46 number 12-23 dated June 18, 2012. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. Document contains the brake pulsation diagnostic guidelines.
A911419 2026895-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 11-16 dated October 5, 2011. During a Bluetooth call, the sound is difficult to hear for the other party. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
Edition67
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
01135020301922
Service Bulletin/Repair Instructions
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
A011350 2030192-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 12-55 dated October 22, 2012. MIL on. DTCs are stored in the engine control module (ECM). Engine may have reduced power without significant loss of power or stalling. A deformed oil seal behind the potentiometer causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs. When the potentiometer is removed, the oil seal can be seen.
2035673/3
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
44134620103345
Service Bulletin/Repair Instructions
Tightening wheel bolts
A441346 2010334-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
A661339 2035673-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 66 number 13-38 dated November 15, 2013. Customer may report hearing wind noise from the front door area when the vehicle is driven at highway speeds. After diagnosis, it is determined that the source of the wind noise is the exterior rear view mirrors. The two main sources of wind noise from the exterior rear view mirrors are: the seam surrounding the turn signal lamp and the seam at the mirror base. The modifications explained in the Service section of this bulletin will effectively mitigate the wind noise symptom for the customer.
TSB-44-13-46
Service Bulletin/Repair Instructions
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
Audi Newsletter
Service Bulletin/Repair Instructions
Elso pro reminder.
Edition62
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
2035673/2
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
6613382035673 2
Service Bulletin/Repair Instructions
Customer may report hearing wind noise from the front door area when the vehicle is driven at
A661338 2035673-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 66 number 13-37 dated November 4, 2013. Customer may report hearing wind noise from the front door area when the vehicle is driven at highway speeds. After diagnosis, it is determined that the source of the wind noise is the exterior rear view mirrors. Throughout the development of the Audi Q5 and Audi Q7, various features have been added to the exterior rear view mirrors. The added features include the turn signal lamp, side assist lamp, perimeter lamp, etc. As the complexity of the exterior rear view mirror increases, the mirrors become more susceptible to wind noise. The two main sources of wind noise from the exterior rear view mirrors are: the seam surrounding the turn signal lamp and the seam at the mirror base. The modifications explained in the Service section of this bulletin will effectively mitigate the wind noise symptom for the customer.
9113142013790 8
Service Bulletin/Repair Instructions
The navigation DVD or other CD/DVD cannot be ejected.
A911314 2013790-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 11-25 dated November 29, 2011. The navigation DVD or other CD/DVD cannot be ejected. There are no DTCs stored in the corresponding module. The eject button is not stuck. When the eject button is pushed, the drive does not sound as if it is trying to eject the CD/DVD. Vehicles with DVD-based navigation systems now have the navigation DVD installed during production. To prevent theft of the DVD during transportation, the eject button of the navigation drive is disabled. The navigation system itself (e.g., route guidance) functions as specified. The eject buttons of vehicles without DVD-based navigation systems are not disabled during production, but could behave as described in the Condition section of this bulletin. The eject button can be enabled through Guided Fault Finding.
2035673/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2035687/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
7013342035687 1
Service Bulletin/Repair Instructions
The A pillar trim on the right or left side of the vehicle is loose or does not fit properly.
A661337 2035673-
Service Bulletin/Repair Instructions
Customer may report hearing wind noise from the front door area when the vehicle is driven at highway speeds. After diagnosis, it is determined that the source of the wind noise is the exterior rear view mirrors. Throughout the development of the Audi Q5 and Audi Q7, various features have been added to the exterior rear view mirrors. The added features include the turn signal lamp, side assist lamp, perimeter lamp, etc. As the complexity of the exterior rear view mirror increases, the mirrors become more susceptible to wind noise. The two main sources of wind noise from the exterior rear view mirrors are: the seam surrounding the turn signal lamp and the seam at the mirror base. The modifications explained in the Service section of this bulletin will effectively mitigate the wind noise symptom for the customer.
A701334 2035687-
Service Bulletin/Repair Instructions
The A pillar trim on the right or left side of the vehicle is loose or does not fit properly. The shape of the trim deforms over time.
A571397 2022032-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 13-92 dated August 1, 2013. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
Edition59
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
Reference-Oil Ca
Service Bulletin/Repair Instructions
This document contains the Audi oil capacity chart.
Edition58
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
2018015/4
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A721310 2018015-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 72 number 13-07 dated September 10, 2013. Seat adjustment switch for longitudinal, height, rake, and backrest is adjustment sporadically inoperative. Printed circuit board causes sporadic seat adjustment switch operation.
2016275/5
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
96133820162755
Service Bulletin/Repair Instructions
Various electrical components inoperative
A971338 2016275-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 97 number 10-14 dated September 16, 2010. Electrical components associated with the panorama roof, power rear lid, interior lighting, or Central Electrics (such as sunroof frame/sunshade operation, power rear lid operation with open/close switch, dome light operation, etc.) may become inoperative. The battery may be discharged. This bulletin only applies to vehicles with panorama roofs. During vehicle assembly, the wire harness that is routed along the left side of the sunroof frame may be pinched at one of the sunroof frame to body assembly points.
TSB-97-13-38
Service Bulletin/Repair Instructions
AUDI: WIRING HARNESS IS ROUTED ALONG LEFT SIDE OF SUNROOF FRAME COULD BE PINCHED AT SUNROOF FRAME TO ASSEMBLY BODY POINTS CAUSING MULTIPLE ELECTRICAL COMPONENTS TO BECOME INOPERATIVE, AND BATTERY NOT CHARGING. MODEL 2007-2014 Q7. *PE
27 13 19 2029010
Service Bulletin/Repair Instructions
Low battery charge: excess current draw location
A271319 2029010-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
741312 2004327-4
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.
Chart
Service Bulletin/Repair Instructions
Audi Oil Capacity Chart
A571394 2035367-
Service Bulletin/Repair Instructions
Various features in the rear passenger compartment are inoperative. Some features may include power rear windows, rear climate control operating unit, rear sunroof panel, rear reading lamps, rear cigarette lighters, etc. By design, many electronically-controlled features in the rear passenger compartment, in addition to the power rear windows, are deactivated if the child lock in the driver's door is activated.
4013342018194
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
40133420181945
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
A401334 2018194-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 40 number 10-04 dated April 1, 2010. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber. As a result of a leak because the shock absorber is damaged. As a result of residue from when the shock was filled during production, or of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
A901341 2010353-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
43132320187659
Service Bulletin/Repair Instructions
Self-leveling compressor inoperative
A431323 2018765-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 13-14 dated April 11, 2013. The self-leveling system can no longer be adjusted with the MMI. The compressor for the self-leveling system continues to run after the engine has been switched off and the vehicle has been locked. DTCs may be stored in the level control system module. Because of poor performance or failure of the air suspension compressor, the vehicle ride height cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
Edition53
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
A481354 2028220-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
A911304 2013422-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
2018015/3
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A721307 2018015-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 72 number 08-11 dated December 4, 2008. Seat adjustment switch for longitudinal, height, rake, and backrest is adjustment sporadically inoperative. Printed circuit board causes sporadic seat adjustment switch operation.
131020182884
Service Bulletin/Repair Instructions
If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A101310 2018288-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A481351 2017266-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 10-09 dated August 13, 2010. Electric steering column adjustment is restricted or does not work at all. Incorrect operation of Easy Entry is not the cause. It is unlikely that external forces have led to the loss of the stored end positions of the adjustment movement. See TSB 2015819, 48 Easy Entry function of the power adjustable steering column intermittently does not work, for more information. The seat adjustments can be used to maintain the 10-inch minimum recommended distance from the steering wheel in case of airbag deployment. The steering column may be under tension due to unfavorable tolerances of the steering column and module cross carrier. As a result, the current draw of the regulator motors is above specification, so the electric steering column adjustment fails.
A911302 2018187-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
A481349 2015819-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 13-43 dated April 19, 2013. The customer may report that the Easy Entry function of the power adjustable steering column intermittently does not work.
A011322 2019208-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 13-93 dated May 8, 2013. Engine does not start in extremely cold ambient temperatures. If, during winter months, the vehicle is used mainly for short trips, it is possible for an excessive amount of condensed water to collect in the rear muffler. When the condensed water level in the muffler reaches a certain point, it is possible for this water to run into the exhaust pipe and freeze overnight, preventing the engine from starting.
A431322 2018190-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 13-18 dated May 8, 2013. Customer may report a warning for self-leveling suspension in instrument cluster. DTCs may be stored in the self-leveling suspension control module. The DTC does not affect the operation of the shock absorbers. Due to manufacturing quality differences in the control module for the self-leveling suspension system, one of the DTCs listed above may be stored.
A431321 2017325-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 13-20 dated July 22, 2013. Immediately after the vehicle is started, the air suspension lowers the vehicle to its lowest possible position. The air suspension warning light blinks. DTC 01487 (System function test incorrect signal sporadic) is stored in the level control system control module, J197 (address word 34). An ignition off/on cycle will reboot the system and restore the functions.
A641329 2020552-
Service Bulletin/Repair Instructions
Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
A941327 2033675-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 55 number 13-31 dated July 18, 2013. The customer may report that the tail lamp lighting does not switch over from bumper to the lid, with lid closed. The rear bumper lights function normally (brake lights, reverse lights, driving lights, turn signals). The center mount brake light functions normally. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46).
A321304 2015969-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 32 number 08-01 dated December 20, 2007. ATF is leaking from torque converter oil seal. Dust/dirt intrusion into the bell housing may damage the seal.
A461353 2034181-
Service Bulletin/Repair Instructions
Customer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
2013 06 Audi Bra
Service Bulletin/Repair Instructions
This document contains information on the Audi braking guard.
A571392 2022032-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 11-49 dated August 8, 2011. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle "locked itself". The lock command history is stored in the convenience system control module (J393).
Edition46
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
2017325/7
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
43132020173257
Service Bulletin/Repair Instructions
No communication with 34 module, vehicle lowers after engine start, air suspension warning lights blink
A431320 2017325-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 11-07 dated November 23, 2011. Immediately after the vehicle is started, the air suspension lowers the vehicle to its lowest possible position. The air suspension warning light blinks. An ignition off/on cycle will reboot the system and restore the functions.DTC 01487 (System function test incorrect signal sporadic) is stored in the level control system control module, J197 (address word 34).
Edition45
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
37 13 09 2028715
Service Bulletin/Repair Instructions
After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
37130920287152
Service Bulletin/Repair Instructions
Rough gear changes both when accelerating and slowing down
A371309 2028715-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
TSB-37-13-09
Service Bulletin/Repair Instructions
AUDI: IN SOME VEHICLES, THE CLUTCHES, AFTER HAVING TORQUE CONVERTER, COMPLETE GEARBOX REPLACEMENT OR MECHATRONICS, MUST ADAPT TO NEW COMPONENTS WITH GRADUAL MOVING OF CLUTCH LININGS IN MOST DIVERSE LOAD CONDITIONS. MODELS 2004-14, A3, TT, Q7, A4, A5, A6, A7, A8, Q5, S4, S5, S6, S7, RS5. *PE
2033675/4
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A551331 2033675-
Service Bulletin/Repair Instructions
DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly. When the rear lid is opened, the paddle switches change state and the comfort system central control module 2, J773, will read G525 and G526. It will then communicate to the comfort system central control module, J393.
A911392 2030947-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone gets the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call assuming the phone is not responding.
2034341/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A941323 2033675-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 94 number 13-17 dated May 22, 2013. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly. When the rear lid is opened, the paddle switches change state and the comfort system central control module 2, J773, will read G525 and G526. It will then communicate to the comfort system central control module, J393.
A961367 2019260-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 96 number 12-37 dated June 11, 2012. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer's door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 Model Years 2005 - 2006 and A3 Model Year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer's HomeLink® opener system is using an alternate code. The handheld transmitter's programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
A461347 2034387-
Service Bulletin/Repair Instructions
Customer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged. If the electro-mechanical parking brake is not operated for some time, the free play between brake pads and brake discs increases because of normal brake pad wear. The parking brake control unit performs an automatic correction about every 621 miles (1,000 km). On A8 models, the brake pad thickness is also calculated.
Edition42
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
01130920147538
Service Bulletin/Repair Instructions
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
A011309 2014753-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
A191341 2025303-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Edition39
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
Edition38
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
37-13-07
Service Bulletin/Repair Instructions
AUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS
2033675/2
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-94-13-16
Service Bulletin/Repair Instructions
AUDI: ON SOME VEHICLES, THE SWITCH BETWEEN REAR LID TAIL LAMP AND BUMPER, DOES NOT SWITCH OVER WHEN LID IS IN OPERATION, DUE TO PADDLE, OF REAR SILL TRIM, NOT CONTACTING OPPOSING LID LATCH POINTS, UNIFORMLY. MODELS 2007-2014 Q7, 2009-2014 Q5. *PE UPDATED 07/10/2013 *JS
Edition35
Service Bulletin/Repair Instructions
Elsaweb Newsletter
01139320192082
Service Bulletin/Repair Instructions
If, during winter months, the vehicle is used mainly for short trips, it is possible for an excessive amount of condensed water to collect in the rear muffler. When the condensed water level in the muffler reaches a certain point, it is possible for this water to run into the exhaust pipe and freeze overnight, preventing the engine from starting.
2018190/4
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2019208/2
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2033666/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
4313172033666
Service Bulletin/Repair Instructions
Vehicle lowers itself, air suspension warning light on, level sensor error (PR-2MB or 1BK)
43131720336661
Service Bulletin/Repair Instructions
Vehicle lowers itself, air suspension warning light on, level sensor error (PR-2MB or 1BK)
4313182018190
Service Bulletin/Repair Instructions
Warning for self-leveling suspension in instrument cluster (DTCs 00142, 00143, 00144, 00145)
A011393 2019208-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 21 number 08-02 dated November 11, 2008. Engine does not start in extremely cold ambient temperatures. If, during winter months, the vehicle is used mainly for short trips, it is possible for an excessive amount of condensed water to collect in the rear muffler. When the condensed water level in the muffler reaches a certain point, it is possible for this water to run into the exhaust pipe and freeze overnight, preventing the engine from starting.
2033675/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A941316 2033675-
Service Bulletin/Repair Instructions
The customer may report that the tail lamp lighting does not switch between the rear lid and the bumper when the lid is operated. DTC 03703 (Rear lid -closed- sensor) may be stored in the comfort system central control module, J393 (address word 46).
A481343 2015819-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 48 number 11-15 dated January 10, 2011. The customer may report that the Easy Entry function of the power adjustable steering column intermittently does not work.
2033587/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
4313152033587
Service Bulletin/Repair Instructions
Self-leveling does not work: DTC 02645 stored
43131520335871
Service Bulletin/Repair Instructions
Self-leveling does not work: DTC 02645 stored
A431315 2033587-
Service Bulletin/Repair Instructions
Self-leveling suspension cannot be adjusted during extremely cold weather. The self-leveling suspension warning light is illuminated in the instrument cluster. The self-leveling suspension operates normally again after the vehicle has been parked for a while in a garage or in the sun. DTC 20645 003 (valves for self-leveling control, mechanical fault) is present in the level control system module, J197 (address word 34). If the dryer on the air supply unit (air compressor) has taken in humidity for a long period of time, it may become saturated. As a result, the increased air humidity may get into the solenoid valve block and create condensation. In freezing temperatures, the condensation can freeze and block the valves, a condition that is recognized as a mechanical fault by the vehicle's self-diagnosis. Humidity can also enter the system if there is too much water in the air filter housing. Excess water can enter the air filter housing if the vehicle is driven in deep water or exposed to splashing water for an extended period of time (such as during off-road use).
4313142018765
Service Bulletin/Repair Instructions
Self-leveling compressor inoperative
43131420187658
Service Bulletin/Repair Instructions
Self-leveling compressor inoperative
A431314 2018765-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 12-11 dated October 29, 2012. The self-leveling system can no longer be adjusted with the MMI. The compressor for the self-leveling system continues to run after the engine has been switched off and the vehicle has been locked. DTCs may be stored in the level control system module, J197 (address word 34). Because of poor performance or failure of the air suspension compressor, the vehicle ride height cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
461335201713011
Service Bulletin/Repair Instructions
Brakes squeel
A461335 2017130-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 46 number 11-16 dated December 9, 2011. Customer complains of brake squeal.
A001348 2002047-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
A191335 2025303-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Edition29
Service Bulletin/Repair Instructions
Elsaweb Newsletter
01137620182607
Service Bulletin/Repair Instructions
Contact resistance in the ECM wiring ? throttle valve.
A011376 2018260-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 13-70 dated February 22, 2013. MIL on. A number of incident memory entries with regard to the throttle valve are stored in the engine control module (ECM), J623 (01). In most cases, the entries are sporadic. Contact resistance in the ECM wiring ? throttle valve.
TSB-01-13-70
Service Bulletin/Repair Instructions
AUDI: 01 MIL ON P1545, P0121, P0123, P0221, OR P0222 STORED IN ECM. A NUMBER OF INCIDENT MEMORY ENTRIES WITH REGARD TO THROTTLE VALVE ARE STORED IN THE ECM. IN MOST CASES, THE ENTRIES ARE SPORADIC. *JS UPDATED 04/15/2013 *JS
2030593/2
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A601321 2030593-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 60 number 12-20 dated August 27, 2012. Evidence of water intrusion into the cabin of a vehicle equipped with a Panorama sunroof is found. Any of the water drain hoses can be either incorrectly installed (causing an obstruction) or the drain hose itself could have a defect causing a leak. In either case, water may not be channeled away from the sunroof frame and to the vehicle exterior. In most cases, these malfunctions can be found in the upper section of the drain hose. In the case of front sunroof drain hose malfunctions at the upper section of the drain hose, the repair has been to replace the drain hose. Replacing the drain hose is invasive and labor-intensive because it is necessary to remove and reinstall the instrument panel and structure to complete the procedure.
2020095/5
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
4313132020095
Service Bulletin/Repair Instructions
Air suspension height is uneven, pressure holding valve closed
43131320200955
Service Bulletin/Repair Instructions
Air suspension height is uneven, pressure holding valve closed
A431313 2020095-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 13-12 dated February 4, 2013. The vehicle pulls to one side. The suspension height is uneven and the vehicle is crooked. One wheel location of the suspension is stuck in the raised position. The control system cannot be programmed. entries may be stored in the level control system control module, J197 (34). The residual pressure holding valve of an air spring may be stuck closed, not allowing the air spring to reduce its height. This valve's function is to ensure a minimum air spring pressure of 50 psi in the event of a large leak. For example, if an air supply line was severed by road debris, the residual pressure holding valve would keep the air spring from completely deflating.
A571385 2017082-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 13-82 dated February 5, 2013. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.
Edition26
Service Bulletin/Repair Instructions
Elsaweb Newsletter
0113702018260
Service Bulletin/Repair Instructions
MIL on (P1545, P0121, P0123, P0221 or P0222 stored in ECM)
A011370 2018260-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 97 number 10-06 dated June 4, 2010. MIL on. A number of incident memory entries with regard to the throttle valve are stored in the ECM. In most cases, the entries are sporadic. Contact resistance in the ECM wiring - throttle valve.
Campaign Circula
Service Bulletin/Repair Instructions
The owner's manual installed into affected vehicles during production contains incorrect wheel bolt tightening torque values. However, all dealer service documentation was correctly published. Any wheel service performed at an authorized Audi dealer would have been performed to the correct tightening torque specifications.
SAC-JT
Service Bulletin/Repair Instructions
AUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INCORRECT WHEEL BOLT TIGHTENING TORQUE VALUES ARE INSTALLED IN MANUAL BUT TECHNICIANS WOULD PERFORM CORRECT TIGHTENING AND OWNER'S MANUAL WILL BE REPLACED. MODEL 2007 Q7. *PE
SB-SAC-JT
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A571382 2017082-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 11-55 dated August 22, 2011. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.
A911374 2024323-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
4313122020095
Service Bulletin/Repair Instructions
Air suspension height is uneven, pressure holding valve closed
A431312 2020095-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 10-04 dated September 29, 2010. The vehicle pulls to one side. The suspension height is uneven and the vehicle is crooked. One wheel location of the suspension is stuck in the raised position. The control system cannot be programmed. DTC's may be stored in address 34. The residual pressure holding valve of an air spring may be stuck closed, not allowing the air spring to reduce its height. This valve's function is to ensure a minimum air spring pressure of 50 psi in the event of a large leak. For example, if an air supply line was severed by road debris, the residual pressure holding valve would keep the air spring from completely deflating.
SB-2020095/4
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1335201004313
Service Bulletin/Repair Instructions
Engine oils that meet Audi Oil Quality Standards.
Audi-Q7
Service Bulletin/Repair Instructions
Audi Delivery Guidelines.
2012886/6
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A871236 2012886-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 87 number 10-07 dated September 2, 2010. The A/C system is not cooling as desired in hot weather areas. The following are suggestions to achieve maximum cooling efficiency in hot weather areas.
4312112018765
Service Bulletin/Repair Instructions
Self-leveling compressor inoperative
A431211 2018765-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 43 number 12-08 dated February 2, 2012. The self-leveling system cannot be adjusted any more with the MMI. The compressor for the self-leveling system continues to run after switching off the engine and locking the vehicle. DTCs may be stored. Because of poor performance or failure of the compressor for air suspension, the vehicle position cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
TSB-43-12-11
Service Bulletin/Repair Instructions
AUDI: THE CONTROL MODULE, AS A SAFEGUARD, WILL LOWER VEHICLE TO LOWEST POSITION AND ILLUMINATE WARNING LIGHT DUE TO FAILURE OF COMPRESSOR, FOR AIR SUSPENSION OR POOR PERFORMANCE, VEHICLE NOT ABLE TO BE ADJUSTED. MODELS 2004-2008 A6 (C6), 2013 A6 (C7); 2004-2013 A8 (D3-D4); 2013 A7 (C7); 2007-2011 Q7. *PE
A571278 2031413-
Service Bulletin/Repair Instructions
The seat memory does not work. The MMI displays that the memory function is not active. The seat memory control unit can be deactivated due to voltage fluctuations in the vehicle? s power system, or from a large static discharge through the seat cover. If the seat memory control unit is deactivated due to the above mentioned influences, the control unit cannot be reactivated through any vehicle controls, vehicle keys, or through the normal GFF test plans. It can only be reactivated with special test plans within the tester.
A571279 2018737-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 57 number 10-32 dated September 9, 2010. Customer may complain that the vehicle locks itself when removing the key from the ignition lock. When removing the ignition key from the ignition, the customer may unintentionally operate the lock button of the remote key. With the S contact in the ignition lock off (key is removed), the central locking will resume to respond to signals from the remote key. MVB 17 in electric control unit address $46 (Comfort System Central Control Module) can be used for argumentation. The last received central locking command is stored in this MVB. A value of ?2? indicates a locking command last sent from the remote key. With the Autolock feature, MVB 17 is overwritten. Therefore MVB 17 must be read immediately after the complaint.
SB-2031413/1
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A941292 2012749-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.
0112552030192
Service Bulletin/Repair Instructions
Engine may have reduced performance without significant loss of power or stalling
A011255 2030192-
Service Bulletin/Repair Instructions
MIL light on. P2015 sender of intake manifold flap position/air flow control, implausible signal P2020 sender of intake manifold flap position, intake manifold flap 2, implausible signal. Engine may have reduced performance without significant loss of power or stalling. Check service history to see if the improved ? B? suffix V157 Intake Flap motor has already been installed previously; if yes, only replace the potentiometer seals as described below. The fault entry is made because a linkage of the intake manifold flap adjustment sticks. This is caused by deformed oil seal behind the potentiometers.
A171232 2018550-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 17 number 12 - 31 dated August 30, 2012. Oil consumption measurement - Repair Authorization (CA). In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil.
DC-516
Service Bulletin/Repair Instructions
AUDI: ON CERTAIN VEHICLES, A POTENTIAL FOR COUNTERFEIT AIRBAGS WERE REPLACED, OR INSTALLED, AT INDEPENDENT REPAIR SHOPS AND HAVE NOT BEEN CERTIFIED BY DEALERSHIPS OR AUDI. MODELS 2006-2009 A3, A4, A6, A8, Q5, Q7. *PE
Email - Counterf
Service Bulletin/Repair Instructions
On October 10, 2012, the National Highway Traffic Safety Administration released a press release regarding the potential for some vehicles to be at risk for containing counterfeit airbags if the airbags in the vehicle were replaced at independent repair shops that are not Audi dealerships or Audi certified. The Audi vehicles listed by NHTSA as at risk vehicles for the potential of containing counterfeit airbags if the airbags have been replaced are MY 2006-2009 A3, A4, A6, A8, Q5, and Q7 vehicles. If a Customer purchased their vehicle new, or if the vehicle is Certified pre-owned and a CARFAX report shows the airbag has never been replaced, there is no issue.
A911263 2021151-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 11 ? 83 dated April 15, 2011. The customer may report that the illumination of the dash insert, the air conditioning control panel or the inside light flickers when briefly pressing the accelerator in P or N or when shifting down while driving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off and the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly increased voltage, and the lights mentioned above may briefly flicker. This characteristic is caused by the alternator design and is a normal condition of the vehicle.
A911262 2024323-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 91 number 10 - 60 dated September 28, 2010. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
1712322018550
Service Bulletin/Repair Instructions
Oil consumption measurement - Repair Authorization (CA)
2020051-4
Service Bulletin/Repair Instructions
AUDI: DOOR CANNOT BE OPENED FROM HANDLE IN COLD WEATHER. THIS IS CAUSED BY WATER ENTERING THROUGH THE OUTSIDE DOOR HANDLE AND INTO THE SHEATHING OF THE BOWDEN CABLE. IN EXTREMELY COLD WEATHER, IT IS POSSIBLE FOR THE CABLE TO FREEZE. *JS
TSB-01-12-39
Service Bulletin/Repair Instructions
AUDI: ENGINE HAS REDUCED ENGINE PERFORMANCE WITHOUT LOSS OF POWER OR STALLING; CIRCUIT GROUNDS; FUEL QUALITY POOR; MIL IS CONSTANTLY ILLUMINATED OR FLASHING; ROUGH IDLE; IGNITION COILS INCORRECTLY INSTALLED; ELECTRICAL CONNECTIONS LOOSE OR DAMAGED. *PE
TSB-43-11-07
Service Bulletin/Repair Instructions
AUDI: INFORMATION IS BEING PROVIDED REGARDING THE AIR SUSPENSION LOWERING VEHICLE AFTER IT HAS BEEN STARTED. AIR SUSPENSION WARNING LIGHT BLINKS. *PE
SB090111
Service Bulletin/Repair Instructions
VOLKSWAGEN SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. PRODUCTION ISSUES MAY CAUSE PREMATURE WEAR ON THE INTAKE CAMSHAFT AND CAMSHAFT FOLLOWER. MALFUNCTION LIGHT WILL ILLUMINATE. *RM
TSB-57-11-44
Service Bulletin/Repair Instructions
AUDI: THE DOOR CANNOT BE OPENED OR CLOSED FROM THE OUTSIDE OF THE VEHICLE IN COLD WEATHER DUE TO FREEZING WATER. 2007-2010 Q7. *RM
TSB-48-10-14
Service Bulletin/Repair Instructions
AUDI: NOISES FROM INTERMEDIATE STEERING SHAFT. CREAKING NOISES FROM STEERING COLUMN WHEN BRAKING OR MANEUVERING. INCREASED STATIC FRICTION OF THE SLIDING ELEMENT OF THE INTERMEDIATE STEERING SHAFT. *PE
TSB-70-10-21
Service Bulletin/Repair Instructions
AUDI: HEADLIGHT SWITCH IS LOOSE OR FALLS INTO DASHBOARD. THE HOLDER FOR THE HEADLIGHT SWITCH IS BROKEN, SO THE HEADLIGHT SWITCH ASSEMBLY IS LOOSE OR FALLS INTO THE DASHBOARD. WHEN STEPPING INTO THE VEHICLE, THE DRIVER CAN HIT THE HEADLIGHT SWITCH WITH HIS/HER LEG OR KNEE. AS A RESULT, THE RIVETS HOLDING THE HEADLIGHT SWITCH HOLDER IN THE DASHBOARD BREAKS. *PE
AWA-10-11
Service Bulletin/Repair Instructions
VOLKSWAGEN: WARRANTY EXTENSION FOR THE HEADLIGHT BULBS. *RM
TSB-94-10-38
Service Bulletin/Repair Instructions
AUDI: DAYTIME RUNNING LIGHTS DO NOT WORK. DAYTIME RUNNING LIGHTS DO NOT WORK ON VEHICLES WITH XENON HEADLIGHTS. THE THUMB WHEEL OR OPTION FOR DAYTIME RUNNING LIGHTS IS TURNED OFF BY MISTAKE. *PE
TSB-57-10-32
Service Bulletin/Repair Instructions
AUDI: CENTRAL LOCKING LOCKS UP WHEN REMOVING IGNITION KEY FROM IGNITION LOCK. WHEN REMOVING THE IGNITION KEY FROM THE IGNITION, THE CUSTOMER MAY UNINTENTIONALLY OPERATE THE LOCK BUTTON OF THE REMOTE KEY. WITH THE S CONTACT IN THE IGNITION LOCK OFF, THE CENTRAL LOCKING RESPONDS TO SIGNALS FROM THE REMOTE KEY. *PE
SAC-28F2-REV
Service Bulletin/Repair Instructions
AUDI: GASOLINE ENGINE VEHICLES; INSPECT, AND IF NECESSARY, REPLACE IGNITION COILS. VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. ADDED FINAL MAILING PHASE-8/10 VIN INFORMATION. MODELS A4/CABRIOLET; TT; A3; A8; A6; S4; ALLROAD; RS4; Q7; S6; S8. *PE
TSB-13-10-03
Service Bulletin/Repair Instructions
AUDI: GENERATOR WARNING LIGHT ON, ENGINE NOISE, STEERING SLUGGISH, BUT CONDITION DOES NOT RESULT IN LOSS OF STEERING CONTROL. BROKEN TENSION SPRING IN BELT TENSIONER (ROLLER WITHOUT PROFILE). CHANGE TO BELT DRIVE WITH BELT TENSIONER. *PE
TSB-94-10-12
Service Bulletin/Repair Instructions
AUDI: AUTOMATIC HEADLIGHT SWITCHES ON AND OFF WITHOUT REASON. HEADLIGHT TURNS ON OR OFF EARLY OR LATE WHEN THE LIGHT WITCH IS IN THE AUTO POSITION; AFTER REPLACING THE RAIN LIGHT SENSOR G397 OR AFTER REPLACING THE WINDSHIELD, THE AUTOMATIC HEADLIGHT MAY TURN OR OFF WITHOUT CHANGE OF AMBIENT BRIGHTNESS. HEADLIGHTS OPERATE NORMALLY IF THE LIGHT SWITCH IS IN THE ON OR OFF POSITION. *PE
SA-28F2 J1
Service Bulletin/Repair Instructions
AUDI: (REVISED) VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. IF THIS HAPPENS, THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE TO LET YOU KNOW THAT THE VEHICLE MAY EXPERIENCE SOME DETERIORATION IN PERFORMANCE. IN SOME CASES, A MALFUNCTIONING IGNITION COIL MAY CAUSE A VEHICLE TO EXCEED FEDERAL AND/OR CALIFORNIA EMISSIONS STANDARDS. *PE UPDATED 8/9/10. *PE UPDATED 8/11/10. *PE UPDATED 11/8/10. *PE UPDATED 11/10/10. *PE UPDATED 1/10/11. *PE
TSB-94-10-09
Service Bulletin/Repair Instructions
AUDI: FRONT PARKING LIGHT INDICATOR STEAMED UP. UNDER SPECIAL OPERATING CONDITIONS, SUCH AS DRIVING THROUGH DEEP WATER, WATER CAN GET INTO THE TURN SIGNAL PARKING LIGHT. THE TURN SIGNAL PARKING LIGHT HAS OPENINGS FOR AIR CIRCULATION. THE AIR CIRCULATION PROVIDES ANTI-MISTING PROTECTION AND PRESSURE COMPENSATION WHEN THE LIGHT BECOMES HOT. *PE
TSB-00-10-02
Service Bulletin/Repair Instructions
AUDI: SOFTWARE VERSION MANAGEMENT (SVM) OPERATING INSTRUCTIONS. DETAILING THE GENERAL PROCESS FOR CARRYING OUT A SOFTWARE VERSION MANAGEMENT (SVM) SOFTWARE UPDATE FOR ANY TSB OR REQUIRED VEHICLE UPDATE (RVU). TROUBLESHOOTING INFORMATION IS INCLUDED. *PE
TSB-28-10-04
Service Bulletin/Repair Instructions
AUDI: FOR INTERIM CLAIMS FOR 28F2/J1 VEHICLES CAMPAIGN ONLY. APPLICABLE VEHICLES MUST FALL WITHIN VIN RANGES NOTED. ENGINES 2.8L ARE NOT AFFECTED IN THIS SCOPE. COILS OF SCREW DOWN DESIGN (NON PENCIL TYPE) ARE ALSO NOT AFFECTED. THE MIL IS FLASHING OR CONSTANTLY ILLUMINATED. DTCS FOR MISFIRE IN ONE OR MORE CYLINDERS ARE STORED IN THE ECM DATA MEMORY (P0300 TO 0312). *PE
TSB-24-10-02
Service Bulletin/Repair Instructions
AUDI: MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY-P310B (LOW PRESSURE FUEL SYSTEM REGULATION, FUEL PRESSURE OUTSIDE TOLERANCE); P129F OR P008B (LOW PRESSURE FUEL SYSTEM, PRESSURE TOO HIGH); P129E OR P008A (LOW PRESSURE SYSTEM, PRESSURE TOO LOW); P2540 (LOW PRESSURE FUEL SYSTEM, PRESSURE OUT OF RANGE); P0087 (RAIL FUEL PRESSURE SYSTEM, PRESSURE TOO LOW). MODELS A3,4,6,8, S6,8, RS4, Q7, AND TT (2005-2008). *PE
TSB-24-10-01
Service Bulletin/Repair Instructions
AUDI: DUE TO FUEL INTRUSION INTO THE LOW PRESSURE SYSTEM FUEL PRESSURE SENSOR (G410), A FALSE SIGNAL MAY BE SENT TO THE CONTROLLER, RESULTING IN A READING THAT IS OUT OF TOLERANCE. COMPARING MEASURE VALUE BLOCK 103 WITH 106 IS NOT AN ACCURATE METHOD TO DIAGNOSE LOW SIDE FUEL PRESSURE SENSOR G410. *PE
TSB-43-09-10
Service Bulletin/Repair Instructions
AUDI: SELF LEVELING COMPRESSOR INOPERATIVE. SELF LEVELING SYSTEM CANNOT BE ADJUSTED ANY MORE WITH THE MMI; COMPRESSOR FOR SELF LEVELING SYSTEM CONTINUES TO RUN AFTER SWITCHING OFF THE ENGINE AND LOCKING THE VEHICLE. BECAUSE OF POOR PERFORMANCE OR FAILURE OF COMPRESSOR FOR AIR SUSPENSION, VEHICLE POSITION CANNOT BE ADJUSTED. *PE
KM-1379
Service Bulletin/Repair Instructions
AUDI: MIL LIGHT ON AND DTC P2294 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT), P2295 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT LOW), P2296 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT HIGH) IN FAULT MEMORY DRIVABILITY IS NOT AFFECTED. WIRING HARNESS TO HIGH PRESSURE PUMP MIGHT BE STRESSED AND TIGHTLY BENT AT THE PUMP CONNECTOR. THE HARNESS ALSO MIGHT BE BENT AROUND SHARP EDGES OF CYLINDER HEAD. NO MODELS LISTED. *PE
TSB-01-09-06
Service Bulletin/Repair Instructions
AUDI: SOFTWARE VERSION MANAGEMENT (SVM), OPERATING INSTRUCTIONS. SVM IS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (RE-PROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN AUDI VEHICLES. THIS SYSTEM USES THE VAS 5051B OR VAS 5052 DIAGNOSTIC TOOLS TO SEND VEHICLE SPECIFIC DATA TO THE SVM DATABASE, TO DOWNLOAD INSTRUCTIONS FROM THE SVM DATABASE, AND TO FLASH CONTROL UNITS FOR IDENTIFIED SOFTWARE UPDATES. *PE
TSB-24-09-08
Service Bulletin/Repair Instructions
AUDI: ENGINE WILL NOT START WITH POSSIBLE MIL/EPC ON (P0087, P0088, P310B). ENGINE DOESN'T START. THE FOLLOWING DTC ENTRIES MAY BE LOGGED IN THE FAULT MEMORY INDIVIDUALLY OR IN COMBINATION: FUEL RAIL/SYSTEM PRESSURE TOO LOW-P0087; FUEL RAIL/SYSTEM PRESSURE TOO HIGH-P0088; LOW FUEL PRESSURE REGULATION, FUEL PRESSURE OUTSIDE OF TOLERANCE-P310B. *PE
TB-24-09-07
Service Bulletin/Repair Instructions
AUDI: FUEL PRESSURE SENSOR REPLACEMENT. VEHICLE MUST MEET ALL OF THE FOLLOWING CRITERIA: VEHICLES THAT SHOW THE CL/24M4 CODE IN THE ELSAWEB CAMPAIGN/ACTION INFORMATION SCREEN; WITHIN THE LIMITED NEW VEHICLE WARRANTY;PROCEDURE MUST BE PERFORMED WITHIN THE ALLOTTED TIME FRAME STATED; MUST BE PERFORMED ON APPLICABLE VEHICLES IN DEALER INVENTORY PRIOR TO SALE. *PE
TB-97-09-01
Service Bulletin/Repair Instructions
AUDI: AFTER ENGINE START, THE STEERING IS STIFFER THAN IT USED TO BE AND/OR THAT THE GLOVE COMPARTMENT CANNOT BE OPENED. THIS CONDITION IS ALSO PRESENT IN THE NEXT DRIVING CYCLE. *PE
TSB-01-08-33
Service Bulletin/Repair Instructions
AUDI: SOFTWARE VERSION MANAGEMENT(SVM) OPERATING INSTRUCTIONS. ITS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (REPROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN ALL AUDI VEHICLES. *PE
TSB-43-08-17
Service Bulletin/Repair Instructions
AUDI: IMMEDIATELY AFTER THE VEHICLE IS STARTED, THE AIR SUSPENSION LOWERS THE VEHICLE TO ITS LOWEST POSSIBLE POSITION. THE AIR SUSPENSION WARNING LIGHT BLINKS. *PE
TSB-43-08-16
Service Bulletin/Repair Instructions
AUDI: THE SELF LEVELING SYSTEM CAN NOT BE ADJUSTED ANY MORE WITH THE MMI. THE COMPRESSOR FOR THE SELF LEVELING SYSTEM CONTINUES TO RUN AFTER SWITCHING OFF THE ENGINE AND LOCKING THE VEHICLE. *PE
TSB-44-08-14
Service Bulletin/Repair Instructions
AUDI: WHEEL BOLTS REQUIRE TORQUE ADJUSTMENT. TORQUE STICKS AND TORQUE EXTENSION BARS ARE NOT APPROVED BY AUDI OF AMERICA, INC. AND SHOULD NOT BE USED TO APPLY TORQUE TO WHEEL BOLTS. ALL AUDI MODELS INCLUDED. *PE
TSB-43-08-15
Service Bulletin/Repair Instructions
AUDI: AIR SUSPENSION OPERATIVE (DTC 1577). COMPRESSOR SWITCH OFF DUE TO EXCESSIVE TEMPERATURE, SPORADIC) IS STORED IN THE AIR SUSPENSION CONTROL MODULE. THIS DTC DOES NOT INDICATE A COMPRESSOR MALFUNCTION. *PE
TSB-43-08-07
Service Bulletin/Repair Instructions
AUDI: SELF LEVELING COMPRESSOR INOPERATIVE. THE SELF LEVELING SYSTEM CANNOT BE ADJUSTED ANY MORE WITH THE MMI. THE COMPRESSOR FOR THE SELF LEVELING SYSTEM CONTINUES TO RUN AFTER SWITCHING OFF THE ENGINE AND LOCKING THE VEHICLE. *PE
240812
Service Bulletin/Repair Instructions
MIL ON (DTC P310B AND/OR P129F) AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY. *PE
28 08 03
Service Bulletin/Repair Instructions
MIL ON (DTC'S FOR CAM POSITION SENSOR). *NJ
39 08 01
Service Bulletin/Repair Instructions
TRANSFER CASE LEAKS. *NJ
48 08 02
Service Bulletin/Repair Instructions
ELECTRIC STEERING COLUMN ADJUSTMENT IS INOPERATIVE. *NJ
390702
Service Bulletin/Repair Instructions
RVU - 2007 AUDI Q7 CHECKING REAR AXLE DIFFERENTIAL (CE). *NJ UPDATED 4/15/08. *NJ
TSB-39-07-03
Service Bulletin/Repair Instructions
AUDI: CHECKING REAR AXLE DIFFERENTIAL (CE). SOME VEHICLES MANUFACTURED WITHIN A SPECIFIC PERIOD, THE REAR AXLE DIFFERENTIAL MAY HAVE BEEN FITTED WITH NON TEMPERED BEVEL GEARS, WHICH CAN EXHIBIT A HIGH DEGREE OF WEAR AFTER A SHORT PERIOD OF SERVICE. THE REAR AXLE DIFFERENTIAL WILL BE CHECKED AND, IF NECESSARY, THE AXLE OIL MUST ALSO BE CHECKED. IF THE WEAR IS EXCESSIVE, THE REAR AXLE DIFFERENTIAL MUST BE REPLACED. *PE
TSB-39-07-02
Service Bulletin/Repair Instructions
AUDI: RVU-CHECKING REAR AXLE DIFFERENTIAL (CE). THIS RVU HAS BEEN PROACTIVELY RELEASED TO PREVENT THE FOLLOWING CONDITION FROM OCCURRING IN THE VEHICLE: THE REAR AXLE DIFFERENTIAL MAY EXHIBIT A HIGH DEGREE OF WEAR AFTER A SHORT PERIOD OF SERVICE. *PE
280708
Service Bulletin/Repair Instructions
MIL ON (DTC'S FOR CMP SENSORS IN ECM). *NJ
TSB-28-07-08
Service Bulletin/Repair Instructions
AUDI: MIL ON (DTCS FOR CMP SENSORS IN ECM). DURING ENGINE STARTING PHASE, ELECTRICAL CURRENT NEAR THE ENGINE WIRING HARNESS CAN CREATE ELECTRICAL INTERFERENCE TO THE BANK 2 CMP SENSORS G163 AND G301. ELECTRICAL INTERFERENCE ONLY AFFECTS BANK 2 CMP SENSORS G163 AND G301. *PE
0718
Service Bulletin/Repair Instructions
AUTOMATIC HEADLIGHT SWITCHES ON AND OFF WITHOUT REASON. *NJ
TSB-94-07-18
Service Bulletin/Repair Instructions
AUDI: AUTOMATIC HEADLIGHT SWITCHES ON AND OFF WITHOUT REASON. AUTOMATIC HEADLIGHT SWITCHES ON TOO EARLY OR TOO LATE, SWITCHES OFF TOO LATE OR COMES ON TOO LATE WHEN THE SUN SHINES BRIGHTLY. AFTER REPLACING THE RAIN LIGHT SENSOR OR AFTER REPLACING THE WINDSHIELD, THE AUTOMATIC HEADLIGHT SWITCHES ON AND OFF WITHOUT REASON. HEADLIGHT CAN STILL BE OPERATED MANUALLY. POSSIBLE CAUSES COULD BE WINDOW DAMAGED/DIRTY IN SENSOR AREA; WHEN WINDOW WAS REPAIRED THE SENSOR WAS FITTED WITHOUT ADHESIVE PAD; AND SENSOR CODE FOR WINDOW IS WRONG; WRONG WINDSHIELD WAS INSTALLED; OR WIRING (PLUG/CONTACT LOOSE) DAMAGED. *PE
240708
Service Bulletin/Repair Instructions
MIL ON (DTC P310B AND/OR P129F). *KB UPDATED 5/13/08. *NJ
0709
Service Bulletin/Repair Instructions
OUTSIDE DOOR HANDLE IS STICKING. *NJ
TSB-57-07-09
Service Bulletin/Repair Instructions
AUDI: OUTSIDE DOOR HANDLE IS STICKING EXTERIOR DOOR HANDLE STICKS IN THE OPEN POSITION AFTER DOOR IS OPENED. FRICTION BETWEEN THE LOCK CYLINDER TRIM AND THE DOOR HANDLE. *PE
TSB-94-07-13
Service Bulletin/Repair Instructions
AUDI: ADAPTIVE LIGHTING, HEADLIGHT RANGE CONTROL WARNING. HEADLIGHT RANGE CONTROL WARNING IS ON IN THE DRIVER INFORMATION DISPLAY. AFTER CYCLING THE IGNITION WARNING SYMBOL IS OFF AGAIN. *PE
0707
Service Bulletin/Repair Instructions
RVU - SOFTWARE UPDATE OF INSTRUMENT CLUSTER FOR INTERMITTENT OIL PRESSURE WARNING LIGHT (CC). *NJ UPDATED 2/14/08. *NJ
TSB-90-07-08
Service Bulletin/Repair Instructions
AUDI: RVU-SOFTWARE UPDATE OF INSTRUMENT CLUSTER FOR INTERMITTENT OIL PRESSURE WARNING LIGHT (CC). *PE
TSB-90-07-07
Service Bulletin/Repair Instructions
AUDI: RVU-SOFTWARE UPDATE OF INSTRUMENT CLUSTER FOR INTERMITTENT OIL PRESSURE WARNING LIGHT (CC). ENGINE OIL PRESSURE WARNING LIGHT COMES ON IN THE INSTRUMENT CLUSTER WHEN THE ENGINE IS INITIALLY STARTED. THE DOES NOT COME ON AGAIN IF THE ENGINE IS RESTARTED SHORTLY AFTER THE INITIAL START. *PE
940710
Service Bulletin/Repair Instructions
DYNAMIC HEADLIGHT RANGE CONTROL, WARNING LIGHT IS ON IN THE INSTRUMENT PANEL CENTER DISPLAY. *KB
970707
Service Bulletin/Repair Instructions
TRAILER TOWING, WIRING AND TIPS. *KB
8
Service Bulletin/Repair Instructions
REFLASH FOR INSTRUMENT CLUSTER. *KB
240706
Service Bulletin/Repair Instructions
MIL ON, ENGINE MAY RUN ROUGH AFTER COLD START (DTC'S FOR MISFIRE, P0300 - P0306, IN ECM). *KB
2013535
Service Bulletin/Repair Instructions
ENGINE CONTROL MODULE UPDATE. *KB
20036582
Service Bulletin/Repair Instructions
LOSES POWER OR WILL NOT MOVE AFTER STOP. *KB
20056243
Service Bulletin/Repair Instructions
HEADLIGHT AIMING, USING HELLA UNIVERSAL BEAMSETTER. *KB
2012749-2
Service Bulletin/Repair Instructions
EXTERIOR LIGHTS, MOSITURE ACCUMULATION. *PE
01012007
Service Bulletin/Repair Instructions
REPLACEMENT OF OWNER'S MANUAL. *KB
940606
Service Bulletin/Repair Instructions
LIGHT FAILS COMPLETELY ON LEFT OR RIGHT SIDE. FAULT CODES FOUND IN THE CENTRAL ELECTRONICS CONTROL UNIT. *KB
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.