9100900
Service Bulletin/Repair Instructions
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
9100900
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
9100860
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
113280
HOSE AND TUBE - EGR COOLANT
S2208000045 REV.D
Backup Camera Poor Image Quality Inspection
S2623000046
Calibration Requirements For The Power Sliding Door Module (PSDM).
S2623000041 REV.A
Power Liftgate Intermittently Inoperative. Will Not Open/ Close. Liftgate/Hatch Ajar Message Displayed. Rev A
S1623000028 Rev. K
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
9100835
Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
S1623000028 REV.J
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S2623000040
Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
S2623000041
Power Liftgate Intermittently Inoperative. Will Not Open/ Close. Liftgate/Hatch Ajar Message Displayed.
S1623000028 REV.I
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S2623000034
Popping Clicking Noise From Power Sliding Door During Operation Open And Or Closed.
08-208-26 REV. A
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.
08-208-26
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle
S2523000003 REV.A
Door Latch, Handle And Ajar Additional Service Information.
S2623000021
The Customer Concern Is The Power Liftgate, Wipers, Backup Lamp, Stop Lamp, Or Speaker Function Would Intermittently Not Function.
S1623000028 REV.H
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S2623000017
Hood Ajar Message On Cluster.
S2623000015
The Customer May Notice a Popping Noise When Opening or Closing Either Sliding Door.
18-044-26
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
S2602000002
Creaking/Groaning Noise Coming from The Front End
S2608000010
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
S1408000384 REV.J
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
110603
SPEAKER - NONE
110604
SPEAKER - NONE
03D Campaign
Fleet Campaign Parts Ordering Process (03D)
S1408000384 REV.I
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2623000006
Washer Fluid Warning Lamp Illuminated When Reservoir Is Full
109724
Water Pump & Chain Case Cover
109727
Water Pump & Chain Case Cover
9100735
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only
S2509000009
Engine Oil Leak
105646
MODULE - STEERING CONTROL & COLUMN
21-040-25
948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1DB7-00 - Torque Converter Clutch Performance.
S2218000003 REV.B
Customer complaint may include a Mil On/Check Engine Lamp On and Electronic Throttle Control (ETC) Lamp On. There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:
107211
HOSE AND TUBE - EGR COOLANT
31-001-25 REV. B
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. A
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
S2509000001 REV.B
Engine Rattle Noise
S2208000138 REV.B
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
9100622
When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
9100614
ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
S2523000057
1st Row Armrest Not Holding Position, Being Broken, Being Too Low, Or Touching The Console.
S2523000050
Vibration From Engine Or Powertrain. Powertrain Mounting Neutralization Procedure. Discussion: Service information is in the process of being updated to include powertrain mount installation best practices. The new procedure will neutralize the mounts to lessen or remove unwanted mount tension that can lead to vibration complaints.
09-011-25
Misfire Diagnostic Trouble Codes (DTCs), Rough Idle, Valvetrain Noise Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0301 - Cylinder 1 Misfire. ● P0302 - Cylinder 2 Misfire. ● P0303 - Cylinder 3 Misfire. ● P0304 - Cylinder 4 Misfire. ● P0305 - Cylinder 5 Misfire. ● P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: ● Rough idle. ● Valvetrain noise.
S2323000002 REV.A
Washer Light On And Will Not Turn Off After Adding Washer Solvent.
S2423000026 REV.A
Power Sliding Door Will Not Power Open And/Or Close Automatically.
9100498 Rev 3
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.
S258A000013
AM Radio Static, With No Active or Stored Radio Antenna Diagnostic Trouble Codes (DTC).
S2509000004
Misfire DTCs, Rough Idle, Valvetrain Noise
S2509000001 REV.A
Engine Rattle Noise
103952
APPLIQUE - B & C PILLAR
9100471
CANISTER Vapor -If an issue is detected with the Evaporative System Integrity Module (ESIM) Detector and not the Vapor Canister, only replace the ESIM Detector. -Before replacing the Vapor Canister due to Hard to Fill condition, replicate the condition at the Gas Station. If the condition is replicated, then check: 1) for kinked or pinched Clean Air Hose between the ESIM and the EVAP Air Filter; 2) for plugged EVAP Air Filter; 3) for kinked or pinched Vapor Hose between the Fuel Tank and the Vapor Canister. If the EVAP Filter is restricted, the replace the Filter. -Check if the Vapor Canister is flooded with fuel or the Recirculation Line has fuel. If fuel is found in the Vapor Canister or the Recirculation Line, then drop the Fuel Tank, remove the FDM Lock Ring to check if the internal Vapor Line is properly connected to the FDM Port. If the Vapor Line is not connected, then drain the fuel from the internal Vapor Line and properly connect to the FDM. Replace the Vapor Canister and the ESIM.
103525
HORN AND BRACKET - NONE
S2509000002
Engine Noise
9100498 REV 1
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets). Once it is confirmed that the repair will be done using the camshaft/Rocker arms kit, it is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software update.
S2509000001
Engine Rattle Noise
9100498
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets).
103263
RESERVOIR - COOLANT
S1408000384 REV.H
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2523000003
Door Latch, Handle And Ajar Additional Service Information.
21-001-25
Internal Transmission Wiring Connector Short Warranty Extension XN1 This bulletin involves replacing the transmission. *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● P0A3F - Drive Motor A Position Sensor 1 Circuit. ● P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ● P0A45 - Drive Motor B Position Sensor 1 Circuit. ● P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ● Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ● Hybrid Control Processor (HCP). ● Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM
S1408000384 REV.G
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100468
FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule as indicated in the Owner s Manual. If the Filter is restricted or blocked then replace the part. For customers that drive light duty trucks in extreme dusty and dirty road conditions, please reference information only TSB 25-009-24 for an available MOPAR Dual EVAP Filter kit that is customer paid.
S2223000036 REV.A
Reverse View Camera Inoperative After Recent Repair
99965
MODULE - INVERTER
03-008-24
Updated Front Hub Nut Torque Specification There are no Customer Symptoms for this Information Only Technical Service Bulletin (TSB).
S2423000035
Liftgate Inoperative And Or Intermittently Will Not Open Or Close.
31-001-24
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S2423000002
2 nd Row Seat Does Not Fold Using Easy Entry Handle.
S1408000384 REV.F
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2423000031
Power Sliding Door Inoperative Or Intermittently Will Not Open Or Close
S2307000002 REV.B
Suspected Engine Coolant Leak
S2423000026
Power Sliding Door Will Not Power Open And/Or Close Automatically.
S2423000025
3rd Row Seat Headrest Will Not Stay Up On 60% Seat.
97961
BRUSH - VACUUM
S2307000002 REV.A
Suspected Engine Coolant Leak
S2408000044
HCP Stuck In Plant Mode. Red Wrench Light On, Electric Drive Modes Disabled
9100337
PUMP WATER For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
S2208000020
Electric Mode Temporarily Unavailable, Cluster Message Displayed Vehicle in Fuel Oil Refresh Mode (FORM)
ReferenceY40A
Revised Customer Satisfaction Notification Y40 ? Control Module Software Updates
S248A000001
SOS and Assistance Call Not Working After Radio Exchange Unit Installed
S1408000384
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
11646
International Warranty Bulletin ID-24-01 (XN1) eFlite Si-eVT Transmission Certain 2017 - 2023 Chrysler Pacifica (RU)
2100124
Internal Transmission Wiring Connector Short Warranty Extension XN1 Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0A3F - Drive Motor A Position Sensor 1 Circuit. ? P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ? P0A45 - Drive Motor B Position Sensor 1 Circuit. ? P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ? Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ? Hybrid Control Processor (HCP). ? Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission.
9100276
Spring Front Upr - Isolator Before replacing this part. Please contact FCA REDACTED CONTENT. ~ If no response in 15 minutes, proceed with repair.
S2309000013
Verifying Camshaft Diagnosis
S2223000058
Water Leak At Upper D-pillar Or Liftgate Area
9004452
CAMERA, Rear View Prior to replacement, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
9100224
SWITCH AND BEZEL Front Door In any case that after following the service procedures it is determined that the switch is faulty. Please do not try to open the Switch nor fix it. Just return the part and order a new one.
9100229
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
9100226
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
9100212
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
S2307000002
Suspected engine coolant leak.
93023
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
93120
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
93005
Warranty Bulletin D-22-17 - 2017 - 2023 (Current) Chrysler Pacifica (RU) and 2013 - 2016 Chrysler Town & Country/ 2013 - 2020 Dodge Caravan (RT) - Corrosion - Complete Hood Panel Warranty Claim Simplification (Rev. B)
93019
FCA Caribbean Warranty Bulletin ID-22-23 - 2017 - 2023 (Current) Chrysler Pacifica (RU) and 2013 - 2016 Chrysler Town & Country/ 2013 - 2020 Dodge Caravan (RT) - Corrosion - Complete Hood Panel Warranty Claim Simplification (Rev. B)
2100823
Internal Transmission Wiring Connector Short Warranty Extension XE1 Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0A3F - Drive Motor A Position Sensor 1 Circuit. ? P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ? P0A45 - Drive Motor B Position Sensor 1 Circuit. ? P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ? Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ? Hybrid Control Processor (HCP). ? Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission.
S2008000031
Low Charging Voltage Displayed On Cluster
S2108000093
Apple CarPlay Does Not Work Or Not Connecting
S1808000152
CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance
9100196
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
ZD7
Customer Satisfaction Notification ZD7 - Radio Software update
S2323000058
Power Sliding Door Will Not Open And Or Close.
92181
Warranty Bulletin D-22-17 - 2017-2023 (Current) Chrysler Pacifica (RU) and 2013-2016 Chrysler Town & Country/ 2013-2020 Dodge Caravan (RT) - Corrosion Complete Hood Panel Warranty Claim Simplification (Rev. A)
92186
FCA Caribbean Warranty Bulletin ID-22-23 - 2017-2023 (Current) Chrysler Pacifica (RU) and 2013-2016 Chrysler Town & Country/ 2013-2020 Dodge Caravan (RT) - Corrosion Complete Hood Panel Warranty Claim Simplification (Rev. A)
ReferenceZD7
Customer Satisfaction Notification ZD7 - Radio Software Update
BulletinA
Customer Satisfaction Notification ZD7 - Radio Software Update
S2309000002
MIL lamp-on. Engine noise, rattle. Misfire or rough running.
0700723
Water Quality When Mixed With Engine Coolant
S238A000024
SOS, Assistance Calls Not Successful After Radio Replacement or Radio Software Update
90880
Y65 Engine Stop/Start Auxiliary Battery Goodwill Initiative
9100133
ROCKER ARM ASSY - ROLLER ROCKER Case 1.- Before replacing the intake or exhaust rocker arms due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head (no need to replace rocker arms). The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. Case 2.- If the INTAKE camshaft or INTAKE rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
9100143
PSU right intake camshaft Case 1) If you are to flash the PSU (Pentastar Upgrade Engine) PCM due to P0300 code presence, only AB or previous LEVEL PSU right intake camshaft PN 05047913AA or AB (old version) should be replaced. If the engine is equipped with the AC/AD LEVEL PSU right intake camshaft PN 05047913AC or AD (new version), camshaft should NOT be replaced. Case 2) If the intake camshaft or intake rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
NotificationY65
Customer Satisfaction Notification Y65 Engine Stop/Start
1804823
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
90217
Warranty Bulletin D-23-07 (XE1) Eflite Si-eVT Transmission - Certain 2017 ? 2023 Chrysler Pacifica (RU)
ID2307
FCA CARIBBEAN WARRANTY BULLETIN
S2307000001
Customer complaint may include a coolant leak, or, a coolant leak is detected during a routine oil change inspection.
1802123
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: Major monitor (misfire) and other diagnostics are disabled on a pending DTCs P0335 and P0339. ? **P0335 - Crankshaft Position Sensor Circuit (NA Only). ? P0339 - Crankshaft Position Sensor Intermittent (NA Only).** ? P06E4 - Control Module Wake-Up Circuit Performance. Software enhancement: Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states. ? Corrections to allow the vehicle to clear the permanent fault codes. This bulletin involves reprogramming the PCM with the latest available software. NOTE: Four modules are required to be flashed for this update to be effective, the following modules are all to be updated along with this PCM update: ? Electronic Brake Booster Module (EBBM). ? AntiLock Brake System Module (ABS). ? Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) or also known as a Power Inverter Module (PIM).
9003357A
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
9003357a
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
S228A000028
Radio Remained On After Ignition Is Switched Off, Dead Battery From Excessive Radio Current Draw
9003357
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
3100123
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S2123000023
The Liftgate Latch Sticks, Will Not Open, Close, Or Hard To Close Manually
S1623000028 Rev.
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
08-009-23
UAR and UCR Radio Enhancements Customers may experience one or more of the following: **Wi-Fi hotspot connection failure. Speaker popping, crackle noise during Voice Recognition (VR) response. Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** Lost radio presets. High pitch chime noise. Contact list not loading. Remote app inoperative. High pitch squeal, pop or humming sound coming from all of the speakers. Backup camera gridlines missing. Radios resets when a wireless connectivity paired phone receives two text messages one after another simultaneously after approximately seven seconds. (Sales Code ABD). Speaker crackling noise. Unable to adjust volume. Radio may reset /reboot, turn itself off and then back on. Active call not transferred to vehicle wireless connectivity. Voice Recognition (VR) not understanding commands. Wireless connectivity phonebook not available. Anti-theft code request message. Lines appear across screen. Radio will not switch modes between AM, FM, SAT or Media. Poor wireless connectivity sound quality. Phone pairing issues. In addition, the following enhancement is included in this update: Wireless connectivity pair or connection improvements. This bulletin involves inspecting and if required, updating the radio software level to **40.1. Depending on the radio?s current software level the radio may need a one or two USB update.**
08-010-23
UGV UJV UKV and UCV Radio Enhancements Customers may experience one or more of the following: Arabic language missing (UJV only). Russian language missing (UGV only). PHEV vehicles may intermittently not charge when using the scheduled charging feature instead of ?Charge Now? button. When shifting to reverse, the radio displays blue/black lines instead of the rear view camera and is followed by a reset. Radio stays on with key ?OFF? and drains battery. Wi-Fi feature cannot be renewed after the trial period has expired. Radio reboots multiple times when a Samsung J-7T phone is connected for charging only. Audio System starts up with the anti-theft screen. Radio processor freezes while the navigation screen is loading. This bulletin involves inspecting and if required, updating the radio software level to: UJV or UGV - 21.9 UDV or UKV ? 19.11
S2323000002
Washer Light On And Will Not Turn Off After Adding Washer Solvent.
08-234-22
UAV and UCV Radio Enhancements Customers may experience one or more of the following: ? **Wi-Fi hotspot connection failure. ? Speaker popping, crackle noise during Voice Recognition (VR) response and navigation guidance. ? Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** ? Lost radio presets. ? SXM favorite song not displaying/playing. ? Incorrect navigation address/location/directions. ? Lost navigation settings. ? SXM icon inoperative (D-Truck). ? Radio display screen is black when the ignition is on (Rear View Camera (RVC) not affected (D-Truck)). ? Radio freeze intermittent (RVC not affected (D-Truck)). ? Wireless connectivity pair or connection issue (D-Truck). ? Radio channel changes by itself (D-Truck). ? Backup camera has black display screen, or Only displays Check Entire Surroundings with black screen (occurs when vehicle is shifted immediately to reverse upon key-on before RVC signal is received, recoverable with key cycle) (D-Truck). ? High pitch chime noise (D-Truck). ? Contact list not loading (D-Truck). ? ?Device Not Supported? message (D-Truck). ? Remote app inoperative (D-Truck). ? Travel-Link fuel price incorrect (D-Truck). ? Backup camera gridlines missing (D-Truck). ? Unable to adjust volume (D-Truck). ? Radio may reset/reboots, turn itself off and then back on again (D-Truck). ? High pitch squeal, pop or humming sound coming from all of the speakers (WK RU Only). ? Radio display screen is black, intermittent (RVC not affected (WK RU Only)). ? Radio freeze intermittent (RVC not affected (WK RU Only)). ? Navigation stuck on loading screen or not appearing at all (WK RU Only). ? Radios resets when a wireless connectivity paired phone receives two text messages one after another simultaneously after approximately seven seconds. (ABD sales code). ? Speaker crackling noise on non amplified vehicles (WK RU, UAV Only). ? Active cal
D-22-15
Brake booster
31-002-22
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
88094
Warranty Bulletin D-22-17 2017?2023 (Current) Chrysler Pacifica (RU) and 2013?2016 Chrysler Town & Country/2013?2020 Dodge Caravan (RT) - Corrosion ? Complete Hood Panel Warranty Claim
08-229-22
Radio Over The Air Software Version Update to 22.66 This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from IR22.64 and IR22.65 to IR22.66. The national launch for the FOTA is expected to begin on January 09, 2023. ? Wi-Fi hotspot connection not working. ? No internet connection message on the phone when trying to connect to a device
0500622
Loss of Power Brake Assist XA7 Warranty Extension
S2208000138RevA
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S2208000073RevA
No Start After a Flash or Powertrain Control Module (PCM), Body Control Module (BCM) Replacement
3100122
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
S2208000020RevA
Electric Mode Temporarily Unavailable, Cluster Message Displayed Vehicle in Fuel Oil Refresh Mode (FORM)
S2008000075RevA
No Start, Start Stop Inoperative, Cluster Message Service Start Stop System
S2208000138
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S228A000004RevB
Panasonic VP4R Wi-Fi New Enrollment Pause
S1708000246RevB
Security Gateway (SGW) Module Theory and Operation
S228A000004RevA
Panasonic VP4R Wi-Fi New Enrollment Pause
9004456
LATCH, Sliding Door (Right / Left) For any RU vehicle with presence of a B2500 fault code (active / stored / pending), please refer to the following steps: 1. Please verify proper functionality of both sliding doors (power or manual) through all inputs (overhead console, key fob, handle grab). 2. If sliding doors operate as expected, do NOT replace sliding door latch(es). 3. If service is required, and your Dealership is located in the Detroit Metro Area please contact FCA Redacted Content, prior to replacing any sliding door latch(es). If no response in 15 minutes, proceed with repair. 4. If possible, please provide any / all information in the repair order narrative regarding status of sliding door function (i.e, door only works manually, won't open via key fob, etc.). This includes all customer feedback as well (what exactly brought the customer into the dealer).
S228A000004
Panasonic VP4R Wi-Fi New Enrollment Pause
9004509
Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold For concerns of V8 oil filter leaks on 22MY and up vehicles: 1. Clean the area and use oil dye to know the exact location of the leak with black/UV light. 2. Removal torque (force needed to loosen the filter) 3. If the source of the leak cannot be identified, please contact FCA Redacted Content to FasTrak parts back for analysis. If no response in 15 minutes, proceed with repair and email pictures of the following: A) Oil filter from the bottom to know if it has a "Factory Installed" filter. B) Leak. C) Damage in filter (if any) D) Gasket. E) Block or Oil Filter Adapter(OFA) or Engine Oil Cooler(EOC) sealing surface.
0807622
UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates
S2123000023RevB
The Liftgate Latch Sticks, Will Not Open, Close, Or Hard To Close Manually
S2209000004
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
S2223000032
Front Door Is Over Flush To The Sliding Door
82518
CHRYSLER PACIFICA (RU) MY2017-21 ELECTRIC COOLANT HEATER Part Requirement Verification
OD82484
Customer Handling Guidelines for Owners Incentive (39CN4)
S2208000073
No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
S2223000021
The Customer Has Difficulty When Opening Or Closing The Power Liftgate
S1708000118
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
S1708000118 RevB
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
S1623000028
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot
S1723000001
Left Hand Drivers Side Mirror Takes Longer to Defrost Or Clear Than Right Side Passenger
S2123000005
Hands Free Sliding Door Sensors Blocked Wash Under Vehicle Message On Cluster
S2208000028
Connected Services Will Not Work After Radio Replacement
S2223000008
Squeak Noise Opening Front Doors
S2223000009
Hands Free Power Sliding Door And Or Liftgate Function Difficult To Use Or Intermittent Operation
08-177-21
BEV/Hybrid - Showroom and Display Vehicle Battery Maintenance This information only bulletin discusses procedures that must be followed for BEV/Hybrid vehicles that are on display at dealership showrooms.
9003730
SI-eVT Transmission - Motor A gap, China Variant & 9 inertia ring bolts For SI-eVT Transmission ONLY: Replace the nine (9) flywheel to damper bolts (68382486AA) when replacing the SI-eVT per TechConnect procedure. North America RU vehicles built prior to Nov 28, 2019 had a 05192374AB level cooler. All subsequent Si-eVT versions have the 05192374AC level cooler requires new 68413378AA inlet hose and 68425381AA outlet hose to service Nov 28, 2019 and prior VINs. China RU vehicles built prior to June 11, 2019 had a 05192374AB level cooler. All 68405320AC have the 05192374AC level cooler requires new 68413378AA inlet hose and 68425381AA outlet hose. The service SI-eVT is shipped with a non-China wiring harness (68241331AC). China market replacement must replace wiring harness with 68368596AA. The China variant 68368596AA wiring harness has an interlock to the electrical charge door. Production SI-eVTs have used motor "A" stators with 0.6 mm and 0.8 mm air gap. The PIM software must match the air gap. Mopar will now ship 68490840A* service SI-eVTs with a 0.8 mm air gap ONLY. Dealers are required to provide a VIN to the Star Center so the DNA of the VIN can be set to the 0.8 mm air gap software. In China, read the SI-eVT model number on the transmission ID tag or imprinted on the case. - all 05062509A*, B* have a 0.6 mm gap so use 68405320AC - all 05062509CA and later (0.8 mm gap) use 68490848AA
S2108000204
Radio Lockup In The Software Installation Screen After Accepting FOTA Update (Incorrect "S2008000204" indicated on published document)
04-001-21
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
S1608000277
KeySense Feature Settings And KeySense PIN Resetting
S1608000277REVA
KeySense Feature Settings And KeySense PIN Resetting
S2108000198
Media Device Connection Guidelines For Bluetooth, Apple CarPlay, Android Auto Or USB To The Radio Head Unit
S1623000028RevE
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot
08-130-21
Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates This bulletin involves updating the BPCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0AA1-00 - Hybrid/EV Battery Positive Contactor ?A? Stuck Closed. P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. P0C78-00 - Hybrid/EV Battery System Precharge Time Too Long. P0B3C-00 - Hybrid/EV Battery Voltage Sense 1 Circuit Performance. P0B41-00 - Hybrid/EV Battery Voltage Sense 2 Circuit Performance. P0B46-00 - Hybrid/EV Battery Voltage Sense 3 Circuit Performance. P0B4B-00 - Hybrid/EV Battery Voltage Sense 4 Circuit Performance. P0B50-00 - Hybrid/EV Battery Voltage Sense 5 Circuit Performance. P0B55-00 - Hybrid/EV Battery Voltage Sense 6 Circuit Performance. P1A16-00 - Hybrid/EV Wakeup Control 3 Output Circuit/Open. P1D7B-00 - Hybrid/EV Wakeup Control 3 Output Circuit Short to Battery. P1D7C-00 - Hybrid/EV Wakeup Control 3 Output Circuit Short to Ground. P1A29 - Cell Supervisory Circuit A Failure. P1A2A - Cell Supervisory Circuit B Failure. P1D3E - Internal Control Module Shut Off Test Error. U0594 - Implausible Data Received from HCP. P2BE5 - Hybrid/EV Battery Pack Current Sensor "C" Circuit Performance. B12B0-85 - Charge Temperature Indicator-Signal Above Allowable Range. Customer may also experience one or more of the following: Premature oil change message displayed on the cluster and vehicle may be running in fuel/oil refresh mode. Scheduled charging not functioning properly because the battery pack did not wake up while plugged in.
S1808000170
Vehicle Does Not Come Out Of Park Once Started Or May Not Start
S2108000170
Head unit button stuck DTC code B14DA-2A
S2108000163
No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
S2109000004
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
S2108000162
High Voltage Battery Installed, New Power Pack Unit/BPCM, No High Voltage Output From Hybrid Battery, No DTC?s
0801821REVA
Video Routing Module (VRM) Enhancements For Rear Seat Entertainment System This bulletin involves updating the VRM software level to 2114.12. Customers may experience one or more of the following: Black screen on Video Routing Module (VRM)/Rear Seat Entertainment (RSE) displays. One or both of the rear screens are not working after rear display replacement.If the rear display is replaced and it does not function, confirm that the VRM software is up to date. RSE remote control does not pair. When playing a video from a USB stick the video does not resume where it left off after an ignition cycle(2017-19 MY Only). Video Screens do not turn on(2017-18 MY Only). Radio Uconnect theater button does not work(2017-18 MY Only). USB playback is choppy(2017 MY Only). The video system resets or does not function(2017 MY Only). The remote pairing screen will time out and inform customer the remote(s) have not been paired(2017 MY Only). Remotes frequently do not pair(2017 MY Only). Occasional reset(2017 MY Only). Rear screens can be accidently controlled from the radio outside of the parental control feature(2017 MY Only). Black screen(2017 MY Only). Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Code (DTCs) have been set:U11BB-00 - Lost Communication With Video Routing Module. B15AD-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Media Port 1. B15AE-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Media Port 2. B15AA-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display 1. B15AB-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display 2.Low Voltage Differential Signal (LVDS) DTCs (B15AD00, B15AE00, B15AB00 and B15AA00) get falsely set when the vehicle is remote started. In addition the following improvement is included:Blueborn cyber security patch(2017-19 MY Only).
S1723000001RevD
Left Hand Drivers Side Mirror Takes Longer to Defrost Or Clear Than Right Side Passenger
S1809000007
Customer Complaint May Include Engine Oil Leak Or Consumption
S1809000007RevC
Customer Complaint May Include Engine Oil Leak Or Consumption
S2008000059RevB
Error Code 20 Message On the Radio Screen
9004386
WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
S2008000059RevA
Error Code 20 Message On the Radio Screen
S2108000127 Rev.
Radio Reboot Continually
S2108000127-1
Radio Reboot Continually
S2108000127REVA
Radio Reboot Continually
S2108000127RevA
Radio Reboot Continually
S2108000130
Bubbles Or Delamination On The Radio Display
S2108000119
Apple CarPlay Malfunctioning, Does Not Launch Or Is Cutting In An Out On Wired And Wireless Connection, Radio Stuck When IPhone Is Connected
S2108000127
Radio Reboot Continually
08-093-21
UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. This is part of a two step FOTA update, first update brings software level to 22.61 and this second FOTA update will take the software to 22.64. National launch for this second step is May 24, 2021. Customers may experience one or more of the following:Navigation is incorrect or can not calculate route. GPS locations is inaccurate. Uconnect radio apps are all inoperable. Backup camera screen is blue (DT and KL). Green horizontal lines appear across screen (DT and KL). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio reset intermittently. Unable to adjust audio volume. Unable to switch modes between AM, FM, SAT or Media. In addition the following enhancements are included in this update:Carplay® connectivity improvement. Improvement to Bluetooth® phone pairing. Bluetooth devices unresponsive. Improved sound quality when using a Bluetooth phone.
0809321
UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. This is part of a two step FOTA update, first update brings software level to 22.61 and this second FOTA update will take the software to 22.64. National launch for this second step is May 24, 2021. Customers may experience one or more of the following:Navigation is incorrect or can not calculate route. GPS locations is inaccurate. Uconnect radio apps are all inoperable. Backup camera screen is blue (DT and KL). Green horizontal lines appear across screen (DT and KL). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio reset intermittently. Unable to adjust audio volume. Unable to switch modes between AM, FM, SAT or Media. In addition the following enhancements are included in this update:Carplay® connectivity improvement. Improvement to Bluetooth® phone pairing. Bluetooth devices unresponsive. Improved sound quality when using a Bluetooth phone.
S2008000010
Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
S2008000010 Rev.
Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
S2108000120
Radio Volume Uncontrollable Or Changing On Its Own
S1809000007 Rev.
Customer Complaint May Include Engine Oil Leak Or Consumption
S1708000118 Rev.
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination After Key Off
S1908000107
Rear Liftgate Does Not Latch, Liftgate Ajar Lamp Illuminated
S1908000107 Rev.
Rear Liftgate Does Not Latch, Liftgate Ajar Lamp Illuminated
S1608000226
Battery Tester Warranty Code Procedures, Midtronics Charger Update Process
S16080002261
Battery Tester Warranty Code Procedures, Medtronic Update Process
S1821000001
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
3100121
Steering System Inspection After a Collision This bulletin documents the FCA US LLC position regarding conditions under which replacement or repair of steering system components are required.
9004009
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
S1723000001 Rev.
Left Hand Drivers Side Mirror Takes Longer to Defrost Or Clear Than Right Side Passenger
S1723000001RevC
Left Hand Drivers Side Mirror Takes Longer to Defrost Or Clear Than Right Side Passenger
S1623000028RevD
Outside Power Fold Rearview Mirror Appears Loose Or Shakes
S1908000048 Rev.
Chime Stuck On In The Audio System
S1908000048RevB
Chime Stuck On In The Audio System
S2108000080
Radio Replacement Reset Routine, Radio Has Missing Icons Or Are Grayed Out
S2108000045
Favorite Song On-Air Alert List Empty
S2108000044
Display Flickering
S2123000008
B2500-01 B2500-07 Power Sliding Door Latch General Electric Failure
S1808000233 Rev.
The Passive Entry Door Handle Does Not Unlock The Door And B25A3-00 Or B25A4-00 May Be Active
S1808000233RevA
The Passive Entry Door Handle Does Not Unlock The Door And B25A3-00 Or B25A4-00 May Be Active
08-018-21
Video Routing Module (VRM) Enhancements For Rear Seat Entertainment System This bulletin involves updating the VRM software level to 20.30.14. Customers may experience one or more of the following: One or both of the rear screens are not working after rear display replacement.If the rear display is replaced and it does not function, confirm that the Video Routing Module (VRM) software is up to date. Black screen on both rear screens(2017-19 MY Only). Rear Seat Entertainment (RSE) remote control does not pair. When playing a video from a USB stick the video does not resume where itleft off after an ignition cycle(2017-19 MY Only). Video Screens do not turn on(2017-18 MY Only). Radio Uconnect theater button does not work(2017-18 MY Only). USB playback is choppy (2017 MY Only). The video system resets or does not function(2017 MY Only). The remote pairing screen will time out and inform customer the remote(s)have not been paired(2017 MY Only). Remotes frequently do not pair(2017 MY Only). Occasional reset(2017 MY Only). Rear screens can be accidently controlled from the radio outside of theparental control feature(2017 MY Only). Black screen(2017 MY Only). Upon further investigation the technician may find that the following Diagnostic Trouble Code(DTC) has been set:U11BB-00 - Lost Communication With Video Routing Module. B15AD-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 1. B15AE-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 2. B15AA-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display1. B15AB-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display2.Low Voltage Differential Signal (LVDS) DTCs (B15AD00, B15AE00, B15AB00, B15AA00) get falsely set when thevehicle is remote started. In addition the following improvement is included. Blueborn cyber security patch(2017-19 MY Only).
S2123000007
Sliding Door Contacts Quarter Window Trim Molding
08-017-21
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.34. Customers may experience one or more of the following: Radio display screen flickers. Clock loses 6 seconds per day (JL with 5 inch screen). Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth® device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7 on JL vehicles only). Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto,® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop.
08-008-21
Flash: Electronic Brake Booster Module (EBBM) Updates This bulletin involves reprogramming the EBBM with the latest available software. Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states.Customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following Diagnostic Trouble Code (DTC) has been set:B22A9-00 - ECU Internal Performance. This software release includes the following software enhancement:Corrections to allow the vehicle to clear the permanent fault codes. Four modules are required to be flashed for this update to be effective, the following modules are all to be updated along with this EBBM update:Powertrain Control Module (PCM) Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) or also known as Power Inverter Module (PIM). Anti-Lock Brake System Module (ABS).
08-009-21
Flash: Anti-Lock Brake System (ABS) Module Updates This bulletin involves reprogramming the ABS module with the latest available software. Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states.Customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following Diagnostic Trouble Code (DTC) has been set:C2200-00 - Anti-Lock Brake Module Internal. This software release includes the following software enhancement:Corrections to allow the vehicle to clear the permanent fault codes. Four modules are required to be flashed for this update to be effective, the following modules are all to be updated along with this ABS update:Powertrain Control Module (PCM) Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) or also known as Power Inverter Module (PIM). Electronic Brake Booster Module (EBBM).
08-010-21
Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates This bulletin involves reprogramming the HCP and AHCP or also known as Power Inverter Module (PIM) with the latest available software. Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states.Customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P06E4 - Control Module Wake-Up Circuit Performance. P2797-00 - Auxiliary Transmission Fluid Pump Performance. P07B5-00 - Park Pawl Position Sensor 1 Circuit Performance. P177C-00 - Park Lock-Pawl Actuator Motor Current Sensor Performance. P288B-00 - Park Lock-Pawl Actuator Circuit Performance. P0CF3-00 - Control Pilot Circuit Open(North America Only). P0CF4-00 - Control Pilot Circuit Performance(North America Only). P0D57-00 - Proximity Detection Circuit Performance(North America Only). P1C68-00 - Hybrid Perf Engine Speed Above Target Idle Speed During Autostop(APAC China Only). Customers may also comment:Vehicle will not start when it is cold -30° C (-22° F) and below. Heard and/or felt bump when the gas engine turns on while driving. This software release includes the following software enhancement: Corrections to allow the vehicle to clear the permanent fault codes. Three modules are required to be flashed for this update to be effective, the following modules are all to be updated along with this HCP&AHCP update:Powertrain Control Module (PCM) Electronic Brake Booster Module (EBBM). Anti-Lock Brake System Module (ABS).
18-003-21
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states.Customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following Diagnostic Trouble Code (DTC) has been set:P06E4 - Control Module Wake-Up Circuit Performance. This software release includes the following software enhancement:Corrections to allow the vehicle to clear the permanent fault codes. Four modules are required to be flashed for this update to be effective, the following modules are all to be updated along with this PCM update:Electronic Brake Booster Module (EBBM). Anti-Lock Brake System Module (ABS). Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) or also known as Power Inverter Module (PIM).
S2008000031 Rev.
Low Charging Voltage Displayed On Cluster
S1908000083 Rev.
Check Engine Light Illuminated, Stop Start Function Inoperative
S1908000195 Rev.
Smog Check Vehicle Inspection Report (VIR) Fails Because Of Permanent Diagnostic Trouble Codes, PDTC
S2023000042
Wind Noise From Upper Corners Of Sliding Doors
S2008000172
Radio Screen Flickering When Using Apple CarPlay Or Android Auto.
S1908000028 Rev.
(Rev. A) Power Inverter Load Ratings
S1908000102
(Rev. A) Power Inverter Load Ratings
S2008000167
Express Window Auto Up Feature Does Not Operate
31-002-20
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
3100220
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S1908000195RevA
Smog Check Vehicle Inspection Report (VIR) Fails Because Of Permanent Diagnostic Trouble Codes, PDTC
S2008000148
Passenger Seat Rear Video Screen Has Horizontal Lines When Playing A DVD Through The External Disc Module
S1908000097 Rev.
(Revision A) Radio Screen Black Or Blank
S2008000143
AUX And USB Ports Halo Lamps Do Not Illuminate At The Rear Seat Entertainment Port Location
S2008000141
Navigation Shows Incorrect Location
S1908000161 Rev.
(Revision A) Active Grill Shutter (AGS) Replacement, DTC U11E9 Loss of Communication With AGS
S2008000130
Radio UConnect GPS Based Trip Computer Missing
S2008000128
Hood Ajar Lamp On, ESS Inoperative, DTC P257E Engine Hood Switch Circuit Low
9003637
USB PORT, Media Hub For Android Auto and Apple Carplay issues, do not replace this part. Android Auto and Apple Carplay applications may not operate with the vehicle if an aftermarket cable is being used. Verify the functionality of these applications using an OEM Apple Lightning cable or an OEM provided USB cable for Android phones before performing any additional troubleshooting. For questions regarding Android Auto or Apply Carplay functionality, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
08-075-20
Video Routing Module (VRM) Enhancements For Rear Seat Entertainment System This bulletin involves updating the VRM software level to 19.38.11. Customers may experience one or more of the following: One or both of the rear screens are not working after rear display replacement.If the rear display is replaced and it does not function, confirm that the Video Routing Module (VRM) software is up to date. Black screen on both rear screens(2017-19 MY Only). Rear Seat Entertainment (RSE) remote control does not pair. When playing a video from a USB stick the video does not resume where itleft off after an ignition cycle(2017-19 MY Only). Video Screens do not turn on(2017-18 MY Only). Radio Uconnect theater button does not work(2017-18 MY Only). USB playback is choppy (2017 MY Only). The video system resets or does not function(2017 MY Only). The remote pairing screen will time out and inform customer the remote(s)have not been paired(2017 MY Only). Remotes frequently do not pair(2017 MY Only). Occasional reset(2017 MY Only). Rear screens can be accidently controlled from the radio outside of theparental control feature(2017 MY Only). Black screen(2017 MY Only). Upon further investigation the technician may find that the following Diagnostic Trouble Code(DTC) has been set(2017-19 MY Only):B15AD-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 1. B15AE-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 2. B15AA-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display1. B15AB-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display2.Low Voltage Differential Signal (LVDS) DTCs (B15AD00, B15AE00, B15AB00, B15AA00) get falsely set when thevehicle is remote started. U11BB-00 - Lost Communication With Video Routing Module(2017-19 MY Only). In addition the following improvement is included. Blueborn cyber security patch(2017-19 MY Only).
0807520
Video Routing Module (VRM) Enhancements For Rear Seat Entertainment System This bulletin involves updating the VRM software level to 19.38.11. Customers may experience one or more of the following: One or both of the rear screens are not working after rear display replacement.If the rear display is replaced and it does not function, confirm that the Video Routing Module (VRM) software is up to date. Black screen on both rear screens(2017-19 MY Only). Rear Seat Entertainment (RSE) remote control does not pair. When playing a video from a USB stick the video does not resume where itleft off after an ignition cycle(2017-19 MY Only). Video Screens do not turn on(2017-18 MY Only). Radio Uconnect theater button does not work(2017-18 MY Only). USB playback is choppy (2017 MY Only). The video system resets or does not function(2017 MY Only). The remote pairing screen will time out and inform customer the remote(s)have not been paired(2017 MY Only). Remotes frequently do not pair(2017 MY Only). Occasional reset(2017 MY Only). Rear screens can be accidently controlled from the radio outside of theparental control feature(2017 MY Only). Black screen(2017 MY Only). Upon further investigation the technician may find that the following Diagnostic Trouble Code(DTC) has been set(2017-19 MY Only):B15AD-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 1. B15AE-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 2. B15AA-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display1. B15AB-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display2.Low Voltage Differential Signal (LVDS) DTCs (B15AD00, B15AE00, B15AB00, B15AA00) get falsely set when thevehicle is remote started. U11BB-00 - Lost Communication With Video Routing Module(2017-19 MY Only). In addition the following improvement is included. Blueborn cyber security patch(2017-19 MY Only).
67567
Safety Recall W46 12-Volt Isolator Post Connection Parts Ordering
S2014000001 Rev
(Revision A) When replacing the fuel line on a 2017-2018 RU 3.6L engine, it will be necessary to install a new fuel pressre sensor connector on to the vehicle harness. Follow the instructions below (or the I-sheet included with the part) when installing the connector repair kit.
S2014000001RevA
(Revision A) When replacing the fuel line on a 2017-2018 RU 3.6L engine, it will be necessary to install a new fuel pressre sensor connector on to the vehicle harness. Follow the instructions below (or the I-sheet included with the part) when installing the connector repair kit.
9004283
TUBE, Fuel Supply If replacing Fuel Supply Tube PN 68421782A$ please refer to STAR Online publication S2014000001 for updated pressure sensor connector pin out information.
S2014000001
When replacing the fuel line on a 2017-2018 RU 3.6L engine, it will be necessary to install a new fuel pressre sensor connector on to the vehicle harness. Follow the instructions below (or the I-sheet included with the part) when installing the connector repair kit. Improper wiring of the replacement connector can result in DTC P018D-Fuel Pressure Sensor High setting in the PCM.
S2021000004
Valve Body Learn Procedure On WiTech Shows The Transmission Is Not In The Proper Gear After Repairs
S2008000095
Service Shifter Is Displayed In the EVIC
S2008000093
Blind Spot Or Park Assist Warnings, False Activation
S2008000075
No Start, Start Stop Inoperative, Cluster Messages to Service Shifter or Service Start Stop System
S1908000210
Hands Free Power Sliding Door And Liftgate Feature Operates Intermittently
S19080000047
Volume Uncontrollable Or Stuck On High
S1908000047
Volume Uncontrollable Or Stuck On High
S1908000079
Travellink Fuel Prices Are Incorrect
S2008000077
VP2R Radio Clock Not Keeping Time
S2008000081
Cruise Control Inoperative.
S2023000030
Squeak Noise Opening Or Closing Front Door
S1909000002
Customer complaint may include an overfilled engine crankcase after an oil change.
S2008000073
VP4 Panasonic Radio USB Software Update Error Codes And Guidelines For Recovery
S1908000048
Chime Stuck On In The Audio System
9004257
FILTER KIT, Engine Oil When refilling oil on a JT, JL, DT, or RU equipped with a 3.6L Pentastar UPGRADE engine, please be advised that the engine oil capacity is 5 quarts of oil.
S1908000101
Remote Phone App Does Not Communicate With Vehicle Radio
S2008000064
Power Sliding Door Will Not Close During The Power Close Cycle
23-015-20
Disinfectant Solution Recommended for COVID-19
S2008000059
Error Code 20 Message On the Radio Screen
S2008000060
Radio Issues With iPhone 11
08-049-20
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
9004244
COOLER, Transmission Oil Work procedure to address fluid leak issue with the transmission oil cooler on the MP (Part # 68249191A$), KL (Part # 68399021A$) and RU (Part # 68217322A$) needs to be followed. Service Instructions for the Condition of a TOC fluid leak: 1) Mark the leakage area if visible to assist in diagnosis and determination of the area where the leak has occurred. 2) If fluid leak was caused by damage or leakage at the transmission oil cooler: - Replace transmission oil cooler - Test drive and verify no additional fluid leaks 3) If fluid leak was caused by leak at quick connect fittings: - Replace transmission oil cooler lines - Test drive and verify no additional fluid leaks
18-039-20
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
08-047-20
Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates This bulletin involves updating the BPCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P1A29 - Cell Supervisory Circuit A Failure. P1A2A - Cell Supervisory Circuit B Failure. P1D3E - Internal Control Module Shut Off Test Error. U0594 - Implausible Data Received from HCP. P2BE5 - Hybrid/EV Battery Pack Current Sensor "C" Circuit Performance. B12B0-85 - Charge Temperature Indicator-Signal Above Allowable Range.
S2019000002
Hands On Steering Wheel Message In EVIC
S1808000175
LED Front Fog Lamps Flicker Or Intermittently Light, Are Dim Or Inoperative. A U11E9, or B16FB-15 may be set
08-042-20
Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processer (AHCP) Diagnostic and System Updates This bulletin involves updating the HCP and the AHCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may one or more of the following DTCs have been set:P0CF3-00 - Control Pilot Circuit Open(North America Only). P0CF4-00 - Control Pilot Circuit Performance(North America Only). P0D57-00 - Proximity Detection Circuit Performance(North America Only). P1C68-00 - Hybrid Perf Engine Speed Above Target Idle Speed During Autostop(APAC China Only).
S2008000019
No Start, No Crank, Mil Lamp ON, DTC?s P1A2A-00, P1A29-00 Cell Supervisory Circuits
S2008000013
Key Programming, Security Pin Request, Pin Invalid
S1805000006
ESC Light Illuminated. DTC C1252-92 VACUUM PUMP CONTROL CIRCUIT And Or P258B ELECTRONIC VACUUM PUMP PERFORMANCE
S1908000097
Radio Screen Black Or Blank
9004022
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
9004171
COVER, Cylinder Head, Left/Right Prior to replacing the cylinder head cover on ANY 3.6L Pentastar Upgrade Engine, verify that there are no steel dowel pins pressed into the cylinder head. If dowels are present in the cylinder head please remove carefully without touching/damaging the cylinder head sealing surface.
9003999
CENTER STACK, Upper (Front Radio Display) 1) If Front Radio Display is experiencing a Black Screen, please verify radio Software is up to date. 2) For concern of a "Yellow Band" on the center stack display, swapping the radio or display will NOT resolve the issue. The issue was corrected in a recently released software update. Please visit Service Library for the latest in diagnostic information. For any questions, please contact: Anmol Shergill (248) 512-1207 - Anmol.Shergill@external.fcagroup.com or Ashikur Rahman (248) 512- 6715 - Ashikur.Rahman@external.fcagroup.com
31-004-19
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
31-005-19
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100319
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100419
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
3100519
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
18-089-19
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
1808919
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
08-095-19
Video Routing Module (VRM) Enhancements For Rear Seat Entertainment System This bulletin involves updating the VRM software level to 19.12.10. Customers may experience the following:Black screen on both rear screens. Rear Seat Entertainment (RSE) remote control does not pair. When playing a video from a USB stick the video does not resume where itleft off after an ignition cycle. Video Screens do not turn on. Radio Uconnect theater button does not work. USB playback is choppy. The video system resets or does not function (Most likely to occur if the vehicle is cold or the battery voltage is too low). Upon further investigationthe technician may find that the following Diagnostic Trouble Code (DTC) has been set:B15AD-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 1. B15AE-00 - Lost Low Voltage Differential Signal (LVDS) Connection With MediaPort 2. B15AA-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display1. B15AB-00 - Lost Low Voltage Differential Signal (LVDS) Connection With Display2.Low Voltage Differential Signal (LVDS) DTCs (B15AD00, B15AE00, B15AB00, B15AA00) get falsely set when thevehicle is remote started. U11BB-00 - Lost Communication With Video Routing Module. In addition the following improvement is included.Blueborn cyber security patch.
9004138
GRILLE, Active Shutter When replacing Active Grille Shutter on vehicles built before April 10th, 2018 rearrange pin configuration in the AGS connector to MY 2019 configuration. Failure to do so will result in U11E9 Loss of Comm with AGS. Please view I-sheet in STAR parts for reference.
04-001-19
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
08-084-19
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7) JL only. Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop.
9001934
LATCH, Liftgate For Liftgate latch not locking and/or unlocking intermittently, please verify there is no glass in the latch from the rear window breaking. Carefully inspect the part for small shards of glass.
9003220
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
9003596
Rear Seat Entertainment System Video Routing Module Please check the Uconnect software portal to verify the latest software is installed. If the VRM Module is not showing up in WiTech (or is unresponsive) and/or the rear screens are not functioning, before replacement follow the steps below: 1.) Check the part number of the Module, this will be the number above the barcode seen in the top corner of the module. if it is 68376134AE contact Mike Galiati at 248-294-8754 before troubleshooting. If no response in 15 minutes, proceed with repair. 2.) Disconnect and reconnect the 26-way power harness, if the module recovers check software is at the latest level 1750.13. 3.) If the Module does not recover in step 1, disconnect the BLUE mini-USB connector to the module and perform step 1 again. If the Module recovers, replace the USB port located next to the BlueRay player. If there are issues while using the Uconnect theater APP, black radio screen/does not open, but the rear screens are functional DO NOT replace the module. This is a radio software issue and not related to the Video Routing Module. If the above tip does not correct the issue, before replacing the Video Routing Module (VRM) for the Rear Seat Entertainment system in the Pacifica, please call Mike Galiati at (248) 294-8754. If no response in 15 minutes, proceed with repair.
9003634
UConnect Theater Remote Before replacing the Remote Control for the Rear Seat Entertainment system due to pairing issues, ensure that the VRM and radio software is at the latest level. If remote pairing still fails at the newer software levels, perform a reset on the remote by simultaneously pressing the Play/Pause, Down, and Screen buttons and holding for about 5 seconds until the remote backlighting flashes. It is also suggested to turn the ignition off, close all the doors, and wait for the cluster to go to sleep. Key the car back to ACC and retry the pairing procedure. For any additional questions regarding part numbers, software levels, or support please call Mike Galiati at (248) 294-8754. If no response in 15 minutes, proceed with repair.
18-001-19 REV B
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following DTCs have been set: P06E9 - Engine Starter Performance, U0418 - Implausible Data Received From Brake System Control Module 1, U0432 - Invalid Data Received From Multi-Axis Acceleration Sensor Module, P06EF - Engine Restart Performance.Software update will help reduce engine crank time, setting a false P06EF, P00FD - Battery -B- State Of Charge Performance, C2222-68 - Improper Powerdown - Event Information, P0607-00 - ECU Internal Performance - ESM, U0402-00 - Implausible Data Received From TCM, U145D-00 - Implausible Data Received From TCM On D-PT, U1465-00 - Implausible Driver Shift Request Signal Received, P0456 - Evap System Small Leak. If no faults were found when performing normal diagnostic, perform this softwareupdate. P258B - Electronic Vacuum Pump Performance. P0503 - Vehicle Speed Sensor 1 Erratic. Customer may also experience one or more of the following:Customer or technician may be unable to read data information from the OBDII connector when using a generic scan tool (APAC only). Rough Idle. Vibration felt in the seat at Idle. Idle undershoot, just before a complete stop. Engine Start Stop (ESS) disabled during an autostart, requiring the driver to key restart. ESS message appears in the Electronics Vehicle Information Center (EVIC) ?Stop/Start Restart Required Fault Detected?. This software release also includes the following software enhancements:Prevent the ESS Aux battery from drying out on vehicles driven in hot regions and conditions. AGS controls modifications to reduce engine compartment temperatures. Limp home RPM correction in a double pedal fault scenario. Improvements to address an occasional engine stall during a panic brake situation from 45 kph (28 mp
TS-WI-0421
Notify dealers and end users of the availability of a improved pinion bracket
TS-WI-0290
Service Bulletin sent to all dealers to inspect L-track bolts for correct torque and to incorporate torque check as part of regular maintenance
TS-WI-0257
Service Bulletin sent to all dealers to update the firmware in the affected vehicles VMI computer. This removes the 1 to 2 second window in the VMIQ software programming immediately prior to the OEM and VMI computers go into 'sleep' mode. During that window, the OEM door operator module may not accept an open or close signal while manual door operation remains unaffected
9003293
A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
D-17-21
Radio Pre-Authorization Program - Select 7.0/8.4/8.4N Radios (New and Exchange) - 2018 Model Year Vehicles
Parts-2
Flywheel to Damper Bolts.
9003756
Rain light sensor Rain sense wipers do not operate: 1. Visual Inspection--> Check if the sensor is visually OK. (all the pins are OK) Check that the Connector is NOT loose (Sensor must get a voltage from 9V to 16V) 2. Functional Checks Rain--> Steering column switch is in auto mode (sensor is active) it is necessary to splash water on the sensitive surface of the sensor to trigger wipes. check the same for different sensitivities When the rain sensitivity is increased (for example from level 0 to level 1), as an acknowledgement a single wipe is seen. (This is not a phantom wipe) and this single wipe is not seen when the rain sensitivity is decreased (from higher level to lower level) Light--> Steering column switch is in auto mode (sensor is active) block the light coming on the sensor from outside of the vehicle (use a opaque object), the head lamps should be activated 3. If the sensor seems functional, it is ideal to remove the silicon gel pad from the sensor, replace it with the new silicon gel pad instead of replacing the whole sensor. When servicing the LRSM please replace the silicon gel pad with a new silicon gel pad (PN 68224945AA) instead of replacing the whole sensor.
9003109
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
9003696
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
05152029
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
23027
Return: Wiring Assy - Engine You have been identified as either having stock, or have stock in transit to your dealership. Please return stock packaged before 2016/07/31 (31 July, 2016)of follow ing part numbers:68176457AF, 68176459AF. Please return suspect parts back to your facing depot using Return Code 02, before 13 September, 2016.
23104
05182535AD - Lamp Assy ?Tail Light LT You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05182535AD . See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
23137
Inspect and Return: Trim Cover Assy - A-Pillar Rt/Lt You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part numbers: 1ZA04DX9AE, 1ZA05DX9AE. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
20244
CBXDP361AA Return: Spacer Kit - Visor You have been identified as either having stock, or have stock in transit to your dealership. Please return stock of part number CBXDP361AA. Replacement part number is CBXDP361AB w hich is in stock and available for order. Please return suspect parts back to your facing depot using Return Code 02, before 16 September, 2016.
Volume 2, Issue
Warranty Operations Newsletter Updates from Warranty Operations
22867
Inspect and Return: Solenoid Module - Transmission You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of follow ing part numbers:52120000AA, 52119435AF, 05078709AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
22892
Return: Lamp Assy - CHMSL& Cargo Light You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of follow ing part numbers:55372082AE, 55372082AD, 55372082AC, 55372082AB, 55372082AA. Replacement part number is 55372082AF w hich is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
22958
1NT30XDVAC - Inspect and Return: Panel - Instrument Panel You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 1N T30XDVAC. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
20616
P/N CBSZR068AA: Inspect & Return: Module Kit - Occupant Restraint You have been identified as either having stock, or have stock in transit to your dealership. Please return part number CBSZR068AA as per the QIR attached. Replacement part can be obtained by ordering the same part number (CBSZR068AA) Please return suspect parts back to your facing depot using Return Code 02, before 02 September, 2016.
23-012-16
Magnesium Inner Liftgate Repair And Appearance Characteristics
2301216
Magnesium Inner Liftgate Repair And Appearance Characteristics
D-16-03
Can/Am Warranty coverage
D1603
Can/Am Warranty coverage
R2108213A
W5A580 (NAG1) Valve Body - complete
R2108213A$
W5A580 (NAG1) Valve Body - complete
9002519
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.