Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
9100226
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
9100196
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
S2209000004
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
9004509
Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
Y22 Combo Rev1
Customer Satisfaction Notification Y22 Driver Airbag Emblem
Y22 Combo
Customer Satisfaction Notification Y22 Driver Airbag Emblem
9004009
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
72301
SAFETY RECAL W09 DRIVER AIR BAG EMBLEM Updated Dealer Instructions
71063
Warranty Bulletin D-20-21 (X91) Active Head Restraint - Select 2010 Dodge Journey (JC), Dodge Avenger/Chrysler Sebring (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan/Chrysler Town & Country (RT) (Rev. A)
70726
Warranty Bulletin D-20-21 (X91) Active Head Restraint - Select 2010 Dodge Journey (JC), Dodge Avenger/Chrysler Sebring (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan (RT)
23-015-20
Disinfectant Solution Recommended for COVID-19
08-049-20
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
18-039-20
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
31-003-19
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-004-19
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
31-005-19
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-006-19
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
3100319
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100419
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
3100519
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
9003220
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
TS-WI-0290
Service Bulletin sent to all dealers to inspect L-track bolts for correct torque and to incorporate torque check as part of regular maintenance
TS-WI-0249
Instructions to inspect the EO label on the fuel tank for accuracy and replace as required any affected label
9003687
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
9003681
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
SB-1234
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
RL108213A$
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
9002887
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
08-046-14 REV. B
Service Bulletin 08-046-14 REV. A Superseded By Customer Satisfaction Notification (CSN) P25 Refer to service procedures outlined in CSN P25.
08-046-14REV.B
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
0804614
Service Bulletin 08-046-14 REV. A Superseded By Customer Satisfaction Notification (CSN) P25 Refer to service procedures outlined in CSN P25.
0804614REVB
Service Bulletin 08-046-14 REV. A Superseded By Customer Satisfaction Notification (CSN) P25 Refer to service procedures outlined in CSN P25.
08-046-14 REV. A
Power Window-Vent Switch - Interim CSN Repair This Bulletin involves disconnecting the switch for the rear power vent window, if requested by the customer. A customer may inquire about Safety Recall P25 and request to have their Power Quarter Vented Window Switch disconnected or a customer may have noticed a burning odor or have seen smoke coming from the power vented window switch on the drivers door. Once the proper amount of parts are available, all of the customer will be notified. In the meantime, the switch can be disconnected, to satisfy the customer.
0804614-1
Power Window-Vent Switch - Interim CSN Repair
08-046-14
Customer Request Rear Window Vent Switch Disconnected This Bulletin involves disconnecting the switch for the rear power vent window, if requested by the customer. A customer may inquire about Safety Recall P25 and request to have their Power Quarter Vented Window Switch disconnected or a customer may have noticed a burning odor or have seen smoke coming from the power vented window switch on the drivers door. Once the proper amount of parts are available, all of the customer will be notified. In the meantime, the switch can be disconnected, to satisfy the customer.
08-042-14
Flash: Dead Battery This Bulletin involves updating the Fold and Stow Module (FSM) with new software because the FSM stays awake resulting in a continuous electrical draw. The customer may experience a dead battery.
08-031-13
Flash: Audio Distortion From The Front Door Speakers When The Rear Aux Port Is Used This bulletin involves re-flashing the Amplifier with updated software. The customer may experience audio distortion from the front door speakers when the rear AUX port is in use. The distortion may occurs when playing certain media with a lot of high frequency content. The equalization doesn't have a settings for rear AUX mode and defaulted to the AM mode. The AM mode equalization has a boost for high frequencies. This increase boost can cause the Amp to distort the sound.
9002519
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
09-001-13
Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
SB-08-045-11
CHRYSLER: THE POWER SLIDING DOOR FAILS, INTERMITTENTLY, TO CLOSE. *PE
23-009-11
CHRYSLER GROUP: WHEN THE SLIDING DOOR IS FULLY OPEN AND IS BEING CLOSED THE DOOR MAY BIND. 2009-2010 TOWN & COUNTRY. *RM
SB-21-008-10
CHRYSLER/DODGE/JEEP: TRANSFER GEAR BEARING NOISE. A HIGH PITCH NOISE OR GROWL COMING FROM THE LEFT SIDE OF THE VEHICLE.. APPLIES TO VEHICLES EQUIPPED WITH 62TE AUTOMATIC TRANSMISSION (SALES CODE DG2) BUILT 1/1/10-7/28/10. *PE
SB-23-014-10
CHRYSLER: SLIDING DOOR WILL NOT LATCH IN THE FULL OPEN POSITION. INVOLVES INSPECTING THE RIGHT AND/OR LEFT SLIDING DOOR OPERATION AND IF NECESSARY ADJUSTING THE SLIDING DOOR LATCH POSITION. APPLIES TO VEHICLES BUILT BEFORE 4/30/10. *PE
SB-05-001-10
CHRYSLER/DODGE: ETC LIGHT ILLUMINATED OR DIAGNOSTIC TROUBLE CODE P2122 AND/OR P2127 SET. THIS BULLETIN INVOLVES DISCONNECTING THE WIRE HARNESS CLIP NEAR THE ETC SENSOR. SOME CUSTOMERS MAY EXPERIENCE AN ETC LIGHT ILLUMINATION. UPON FURTHER INSPECTION THE DTC'S P2122-ACCELERATOR PEDAL POSITION SENSOR 1 CIRCUIT LOW AND/OR P2127-ACCELERATOR PEDAL POSITION SENSOR 2 CIRCUIT LOW HAVE BEEN SET. THIS CONDITION COULD BE CAUSED BY THE WIRING TO THE APP SENSOR BEING HELD TOO TIGHT, CAUSING THE WIRING TO BECOME LOOSE RESULTING IN THE ETC LIGHT ILLUMINATION. MODELS TOWN AND COUNTRY/GRAND CARAVAN. *PE
RT-10-007
DODGE: ETC LIGHT ILLUMINATED OR DIAGNOSTIC TROUBLE CODE P2122 AND/OR P2127 SET. VEHICLES EQUIPPED WITH POWER ADJUSTING PEDALS OR POWER ADJUSTING PEDALS WITH MEMORY (SALES CODE XPP OR XAM) MAY HAVE BEEN BUILT WITH THE WIRING TO THE APP SENSOR BEING HELD TOO TIGHT. MODELS GRAND CARAVAN/TOWN AND COUNTRY. *PE
SB-19-001-10
CHRYSLER: POWER STEERING RETURN LINES. INVOLVES INSPECTING AND IF NECESSARY REMOVING AND REPLACING THE GEAR TO COOLER POWER STEERING RETURN HOSE WITH A KEVLAR BRAIDED RETURN HOSE. MAY EXPERIENCE LEAKS IN POWER STEERING RETURN LINE, AT COLD START UP IN TEMPERATURES BELOW-40%C (-40%F) AND INCREASED STEERING EFFORTS OR NOISY POWER STEERING PUMP. *PE
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.