103774
Service Bulletin/Repair Instructions
LAMP - DOME
Vehicle report
2006 DODGE RAM 1500
Service bulletins
47 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
101232
Service Bulletin/Repair Instructions
Plate - Planetary
9004009
Service Bulletin/Repair Instructions
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
9004350
Service Bulletin/Repair Instructions
GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
9001784
Service Bulletin/Repair Instructions
Mechanical rocker arm, intake, 1.7 ratio.
9004275
Service Bulletin/Repair Instructions
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
23-015-20
Service Bulletin/Repair Instructions
Disinfectant Solution Recommended for COVID-19
08-049-20
Service Bulletin/Repair Instructions
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
S2021000002
Service Bulletin/Repair Instructions
Valve Body Pressure Testing Plug Inspection
31-003-19
Service Bulletin/Repair Instructions
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-005-19
Service Bulletin/Repair Instructions
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-006-19
Service Bulletin/Repair Instructions
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
3100319
Service Bulletin/Repair Instructions
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100519
Service Bulletin/Repair Instructions
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Service Bulletin/Repair Instructions
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
68332810
Service Bulletin/Repair Instructions
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
68332810A
Service Bulletin/Repair Instructions
Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only.
R2118796A
Service Bulletin/Repair Instructions
Valve Body. These may cause over drive cycling.
RL108213A$
Service Bulletin/Repair Instructions
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
9003215
Service Bulletin/Repair Instructions
Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
9002887
Service Bulletin/Repair Instructions
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
9002828
Service Bulletin/Repair Instructions
Part Description: Insulator in Lever Assembly - Valve Body - Trans Issue Description: The manual valve insulator, attaching rivet and an instruction sheet are now available as a kit. If the insulator requires replacement lease order 68253099AA. Note: Insulator color is not relevant for service
08-069-14
Service Bulletin/Repair Instructions
UConnect Hands Free Module Fails To Respond Due To Module Lock Up This bulletin involves replacing the Hands Free Module (HFM) if required. The HFM fails to operate causing the UConnect Hands Free Communications system to not respond when system activation is attempted by the customer. Further diagnosis may reveal that when the wiTECH® scan tool is used to read Diagnostic Trouble Codes (DTCs) the tool indicates that the module is not responding. Other modules on the bus may display loss of communication with the HFM. If the Hands Free Communication system is unresponsive then the HFM may require electronic reset.To perform a electronic reset, turn off the vehicle and pull the Ignition Off Drain (IOD) fuse. Wait a few minutes before reinstalling the IOD fuse and checking if the HFM is communicating. If the HFM still will not communicate, then normal No Response diagnostic should be performed. If the HFM is working properly, the module should be replaced to prevent this condition from happening again.
9002054
Service Bulletin/Repair Instructions
If replacing the steering linkage or drag link inner tie rod assembly at the pitman arm on a vehicle built before Febuary 14 th, 2008, verify that the pitman arm part number is 68039930AA. The part number is embossed on the pitman arm.~If the pitman arm is not a 68039930AA, it must be replaced with a 68039930AA.~ Issue 2: For 2003 to 2007 MY only. If the OE steering linkage has been replaced with 52122362AA, 52122362AB, 52122362AC, 52122362AD, 52122362AE, or 52122362AF and pitman arm 68039930AA the following service parts are available.
9002519
Service Bulletin/Repair Instructions
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
9002688
Service Bulletin/Repair Instructions
68069384A$, R8069384A$, 68086182A$, R8027067A$, RL002012A$ - Gasket, Cylinder Head Cover Before replacing injectors for Diagnostic Trouble Codes P0201, P0202, P0203, P0204, P0205, and/or P0206, please make sure that the wiring loom and/or connector in the valve cover gasket is not the root cause to your concern. In addition, make sure that the wiring attaching nuts are torqued to their proper value.~
08-002-12
Service Bulletin/Repair Instructions
CHRYSLER/DODGE: TURN SIGNAL SWITCH MALFUNCTION CAUSING THE SIGNALS TO FLASH INCORRECTLY. *KB
08-004
Service Bulletin/Repair Instructions
2003-2008 (DR) RAM TRUCK 1500-STEERING SHUDDER DURING PARKING LOT OR LOW VEHICLE SPEED MANEUVERS. *PE
08-007-08
Service Bulletin/Repair Instructions
NO ENGINE CRANK OR NO ENGINE START DUE TO ELECTRONIC LOCKUP OF THE WCM/SKREEM. *NJ
2304106
Service Bulletin/Repair Instructions
EXTERIOR LAMP - LENS FOGGING. *NJ
0300107
Service Bulletin/Repair Instructions
4WD SYSTEM MAY NOT ENGAGE OR DISENGAGE AS DESIRED WITH (SERV 4WD) MESSAGE ILLUMINATED. *KB
1802707
Service Bulletin/Repair Instructions
MIL ILLUMINATION DUE TO EGR POSITION SENSOR DTC - P0404, P0405, P0406. *KB
2100606
Service Bulletin/Repair Instructions
TRANSMISSION JUMPS OUT OF REVERSE. *TT
15
Service Bulletin/Repair Instructions
REPROGRAM WIRELESS CONTROL MODULE. *AK
41
Service Bulletin/Repair Instructions
2006 RAM TRUCK CROSSMEMBER MODIFICATION. *AK
1804105
Service Bulletin/Repair Instructions
FLASH: ENGINE PERFORMANCE/WHITE SMOKE. *TT
1803505
Service Bulletin/Repair Instructions
FLASH:MIL ILLUMINATION AT START-UP DUE TO DTC P2112 OR P1521. *AK
05035
Service Bulletin/Repair Instructions
RAPID RESPONSE TRANSMITTAL SERVICE ACTION TEST AND REPLACE BATTERY AS NECESSARY. *TS
1900805
Service Bulletin/Repair Instructions
REVISED POWER STEERING SYSTEM BLEEDING PROCEDURES. *SC
2100903
Service Bulletin/Repair Instructions
AUTOMATIC TRANSMISSION DIAGNOSTIC TEARDOWN PROCEDURE. VARIOUS MODELS INCLUDING THE 2004 RAM TRUCK, DURANGO, SEBRING CONVERTIBLE, CHEROKEE, VISION, NEON, AND VOYAGER. *TT *SC
16
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION NOTIFICATION E16 - TRANSMISSION COOLER RETURN FILTER. DELAYED ENGAGEMENT WHEN THE SHIFTER IS PLACED INTO GEAR AFTER THE ENGINE HAS BEEN OFF FOR MORE THAN 12 HOURS. *TT
2101505
Service Bulletin/Repair Instructions
45RFE/545RFE TRANS - DELAYED ENGAGEMENT DUE TO COOLER RETURN FILTER REPLACEMENT. *SC
2101605
Service Bulletin/Repair Instructions
RFE TRANSMISSION - DELAYED ENGAGEMENT AFTER AN EXTENDED OFF PERIOD. *SC
05021
Service Bulletin/Repair Instructions
RAPID RESPONSE TRANSMITTAL #05-021. (POWER WAGON SWAY BAR DISCONNECT SWITCH) *SC
2401305
Service Bulletin/Repair Instructions
AIR CONDITIONING (A/C) COOLING COIL ODOR. *TT
2101205
Service Bulletin/Repair Instructions
NEW 42RLE VARIABLE LINE PRESSURE TRANSMISSION (VLP). *TT
05015
Service Bulletin/Repair Instructions
CYLINDER HEAD COVER GASKETS MAY NOT MEET SPECIFICATIONS. THE CYLINDER HEAD COVER GASKET CONTAINS ELECTRICAL CIRCUITS WHICH CONNECT TO THE FUEL INJECTORS. THE ELECTRICAL CIRCUITS COULD OPEN CAUSING A MALFUNCTION INDICATOR LAMP LIGHT TO ILLUMINATE AND INJECTOR RELATED DIAGNOSTIC TROUBLE CODE TO BE SET. THIS SERVICE ACTION WILL INVOLVE REPLACING THE CYLINDER HEAD COVER GASKET. *TT
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.