17-NA-073
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
Vehicle report
1999 GMC YUKON DENALI
Service bulletins
15 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
PIT3098G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a lean to the left or right. Technician will need to measure fender wheel-opening heights, front and rear, to quantify vehicle lean. Fender wheel-opening heights are related to, but distinct from, trim height. The front wheel-opening height is known as P height, and the rear wheel-opening height is known as R height. Adjust and heights that are out of specification. After all adjustments are done, perform a front-end alignment and check headlight aim.
PIP3366C
Service Bulletin/Repair Instructions
This Preliminary information communicates to the dealer technician thatLight Duty Trucks equipped with automatic transmissions and 4 wheel drive may exhibit a condition of grinding/ratcheting type noise when shifting the automatic transmission into park while the transfer case is in 4 wheel drive low (4LO) range. Dealers technician's are advised this condition should be deemed a normal characteristic of 4WD low operation.
PIT3098F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a lean to the left or right. Technician will need to measure fender wheel-opening heights, front and rear, to quantify vehicle lean. Fender wheel-opening heights are related to, but distinct from, trim height. The front wheel-opening height is known as P height, and the rear wheel-opening height is known as R height. Adjust and heights that are out of specification. After all adjustments are done, perform a front-end alignment and check headlight aim.
Recalls
Service Bulletin/Repair Instructions
Vehicle Recalls
99-08-51-007F
Service Bulletin/Repair Instructions
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
PI0281D
Service Bulletin/Repair Instructions
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
130089009
Service Bulletin/Repair Instructions
Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
00-00-89-027G
Service Bulletin/Repair Instructions
This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
01119A
Service Bulletin/Repair Instructions
ROLL-OUT FOR THE GEN III SMALL BLOCK ENGINES WITH IRIDIUM SPARK PLUGS. ALSO INCLUDES 2003/2004 M/L VANS. *TT
3005
Service Bulletin/Repair Instructions
93-00 FULL SIZE UTILITIES (GMT 400 OLD STYLE ONLY) AC BLOWS WARM AND THE HIGH SIDE PRESSURE IS TOO HIGH. *MJ
180901
Service Bulletin/Repair Instructions
CUSTOMERS MAY COMPLAIN THAT THEIR CENTER CONSOLE LOCK IS NOT OPERATIONAL. *SLC
000863007
Service Bulletin/Repair Instructions
SOME CUSTOMERS MAY COMMENT THAT THE HOOD SHEET METAL FLUTTERS OR VIBRATES WHEN DRIVING AT VARIOUS SPEEDS. *TT
00074
Service Bulletin/Repair Instructions
SOME VEHICLES MAY HAVE THE POTENTIAL OF EXHIBITING A BATTERY DRAIN CONDITION WHEN A VEHICLE THEFT EVENT CAUSES A PHONE CALL TO BE INITIATED BY THE ONSTART AUTOMATIC THEFT NOTIFICATION FEATURE, AND THE CALL IS NOT COMPLETED. *TT
99092
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN ON VEHICLES EXHIBITNG VARIATIONS IN FRONT SUSPENSION ALIGNMENT THAT CAN RESULT IN VEHICLE PULL EITHER TO THE RIGHT OR TO THE LEFT. *TT
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.