PIT5801F
Service Bulletin/Repair Instructions
This preliminary information communicates diagnostic tips for air leveling suspension system.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
PIT5801F
This preliminary information communicates diagnostic tips for air leveling suspension system.
PIP4902W
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIT5869B
This PI provides a diagnostic tip when fuse F4DR is opening and dealerships are to inspect the wiring at the center console lid.
PIC6551C
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
PIT6446A
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position after curbview assist is used.
PIT5099J
PI to help diagnose A/C concern
PIT5509N
This PI provides diagnostic tips for diagnosing electric trailer brakes issues.
PIT5966F
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and how to reset/clear the message.
PIT6522
This PI advises dealers that if the K160 Brake System Control Module sets DTC P0606 along with P0562 and/or P25A2, additional diagnostic aids should be followed before replacing parts. The PI provides guidance to inspect for low voltage conditions, wiring, terminal concerns, and module communication issues that may cause false or intermittent EBCM DTCs.
PIT6132E
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed. Engineering is working on a new HVAC door seal material to correct the noise.
PIT6477C
This preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated bleed with the scan tool dues to a issue with the software in the scan tool
PIT5509M
This PI provides diagnostic tips for diagnosing electric trailer brakes issues.
N262552620
Certain vehicles may have a condition that could cause the cylinder 2 glow plug to fail. If this failure occurs, the Malfunction Indicator Light (Check Engine Light) will illuminate and a diagnostic trouble code will set. This special coverage covers the condition described above for a period of 15 years or 150,000 miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after May 11, 2026, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to May 11, 2026, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to replace the cylinder 2 glow plug as necessary. The repairs will be made at no charge to the customer.
PIC6423A
Pi created to provide GM dealers with information on gathering information for projection issue
PIC6551B
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
PIT6507
This PI communicates information on a SPS programming issue causing Serial Data Authentication Configuration to fail.
PIT3271Q
This preliminary information communicates information about how to determine if a wheel and tires size change is available.
PIT6347B
This Preliminary information communicates an issue with ABS SES MIL / Service Brake System / Service StabiliTrak / BSCM DTC P0606 P0562 and dealers to perform additional battery and connection testing.
PIP4902V
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIP6104
This Preliminary information communicates the steps on how to save a GDS2 Session Log and upload to a Technical Assistance Case in CX Connect.
PIT6425D
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no DTC'ss
N252516900-01
Emission Recall. General Motors has decided to conduct a Voluntary Emission Recall. Certain vehicles listed above may have a condition which can cause the fuel pump power control module to fail. If this were to occur, fuel flow to the engine could be interrupted. Dealers will replace the fuel pump power control module.
PIT6415A
PI to explain normal operation for a concern that the outside rearview mirrors may not fold when the doors are locked, due to the personalization settings for Auto Door Unlocking.
N252516900
Emission Recall. Additional VINs moved to Open status.
PIT5985K
This PI provides diagnostics tips to dealership techs when trying to diagnose a CAN Bus communication issue after an event like a lightning strike, battery jump started backwards, failure over the air update, etc.
N252494003-02
Certain vehicles listed above, may have a condition where the connecting rod and/or crankshaft engine components in these vehicles may have manufacturing defects that can lead to engine damage and engine failure. This special coverage covers if an engine failure occurs in the vehicle as a result of the condition described above for a period of 10 years or 150,000 miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after May 23, 2025, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to May 23, 2025, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to replace the engine. The repairs will be made at no charge to the customer.
PIT6400A
This PI Communications information on an alternative product dealers can use to perform 19-NA-255: Wax Coating on Frame Peeling, Metal Shows Corrosion/Rusting due to issue with getting product from current supplier listed in the bulletin.
PIT6425C
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no DTC's
PIT5993F
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
PIT6344A
This Preliminary information communicates an issue with blower motor speed changing when air flow is blocked by snow.
PIP6098
This PI advised dealer technicians of possible causes of diesel fuel contamination in gasoline powered vehicles and advises of warranty direction.
PIP4902U
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIT5828E
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
PIT6276B
This Preliminary information communicates an issue with a service keyless entry message caused by aftermarket door handle covers and they should be removed.
PIT6132D
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed. Engineering is working on a new HVAC door seal material to correct the noise.
PIT5214G
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer’s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
25-NA-339
Under Field Actions N252494000, N252494001, the service procedure includes performing a PICO test on vehicle engines within the identified suspect VIN population. If the engine passes the PICO test, the engine oil will be changed from 0W20 to Mobil 1 Supercar 0W40 dexosR. From that point forward, the engine must use 0W40 dexosR oil products for all future oil change services.
PIT6446
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position after curbview assist is used.
PIT5993E
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
PIT6132C
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed. Engineering is working on a new HVAC door seal material to correct the noise.
PIT6234A
This Preliminary information communicates an issue with an aftermarket device wired into the vehicle and cause the vehicle to turn off when shifted into gear. This PI provides a diagnostic tip to inform dealership to inspect for this aftermarket device.
PIT6425B
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no DTC's
PIT6425A
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no DTC's
PIC6551A
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
N242454441 -03
Certain vehicles listed above, may have a condition where the transmission control valve has worn, resulting in a gradual loss of pressure within the valve. The effects can cause harsh shifting, setting a service engine soon message, reduced engine performance or P0747 diagnostic trouble code. Dealers are to install a new control valve body. The repairs will be made at no charge to the customer.
PIT6440
The Driver Information Center may display a message of Transport Mode On after the ignition is cycled.
PIP6068C
This preliminary information advises dealers that Engine Control Module designation E90 is on a ordering restriction through technical assistance.
PIT6434
This PI is to inform technicians of a possible battery draw caused by the K36 chassis control module. Techs are to update the calibrations of the chassis control module using the service programming system.
PIT5941C
This Preliminary information communicates a issue where the rear windshield wipers will not be in the park position and will cause the rear back glass not to open with the switch or the RKE fob. This explains how to repair that concern.
N252508341
Certain vehicles listed above, may have a condition that could cause the engine coolant control valve to fail an onboard vehicle diagnostic test. If this condition were to occur, the Malfunction Indicator Lamp (Check Engine Light) will illuminate, and a diagnostic trouble code will set. Additionally in some cases, the engine cooling fans may run after the engine is switched off. Dealers are to replace the engine coolant control valve as necessary. The repairs will be made at no charge to the customer.
PIT5800D
This Preliminary information communicates and issues with Fuse F49 blowing causing a SES MIL and a Service Theft Deterrent System message displayed in the DIC. It instructions dealership to inspect the 12 volt power accessory port for shorting out.
13598
New Vehicle Monitoring Programs Section in IVH
PIT5479H
This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston.
PIP6068B
This preliminary information advises dealers that Engine Control Module designation E90 is on a ordering restriction through technical assistance.
22-NA-080
This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
25-NA-110
This bulletin advises the techs that the front and or rear shocks need to be replaced as a set and not 1 at a time to avoid the road and ride performance not to be compromised.
N252510321-01
We identified an issue within SPS that prevented the correct software to be loaded to these vehicles. As a result, we have re-opened these VINs. Please perform the ECM update again which will allow the remedy software to be installed. Then, submit a new claim with a new warranty claim code. If the claim has not been submitted yet, please perform the ECM update again prior to submitting the claim. Thank You.
N252510321-02
Certain vehicles will receive a software update to add to the existing Check Engine Light a Driver Information Center (DIC) warning message if DTC P0016 sets. Dealers will reprogram the Engine Control Module (ECM). Owners who have accepted applicable terms and conditions will have the opportunity to accept these software changes using wireless over-the-air (OTA) technology without having to bring their vehicle to a dealership. Alternatively, owners may have their vehicle serviced at a GM dealer to receive these software updates.
PIP5845B
This P/I is to advise to inspect the stacked plate heat exchanger as possible root cause for any trans concern.
PIT5854D
This Preliminary information communicates information on vehicle speed being limited due to aftermarket lower kit being installed on the vehicle.
PIP6068A
This preliminary information advises dealers that Engine Control Module designation E90 is on a ordering restriction through technical assistance.
PIP4902T
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIC5650M
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775.
PIT6415
PI to explain normal operation for a concern that the outside rearview mirrors may not fold when the doors are locked, due to the personalization settings for Auto Door Unlocking.
PIP5601B
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
PIP5601C
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
PIP5774B
This Preliminary information communicates A vehicle may have a concern of any of the following DTC's set P3189 P318A P318B P318C P318D P318E P318F P3190. Informs dealer to perform a crankshaft variation relearn, Also notes that SI may not isolate.
N252494003-01
Certain vehicles listed above, may have a condition where the connecting rod and/or crankshaft engine components in these vehicles may have manufacturing defects that can lead to engine damage and engine failure. This special coverage covers if an engine failure occurs in the vehicle as a result of the condition described above for a period of 10 years or 150,000 miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after May 23, 2025, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to May 23, 2025, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to replace the engine. The repairs will be made at no charge to the customer.
PIT5832V
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
N252494770-01
Amendments to the Song-Beverly Act (SBA) California warranty law provides vehicle owners with an opportunity to submit a written notice to GM before filing a lawsuit seeking a vehicle repurchase. If such a notice is not provided to GM, then the vehicle owner is prevented from seeking civil penalties in litigation. Vehicle owners of the affected vehicles will be mailed an owner’s manual and warranty insert containing this information in English and Spanish.
PIT6401
This Preliminary information communicates a diagnostic tip on how to resolve a issue of the horn sounding when vehicle doors are being closed and the key in vehicle reminder set to off.
PIC6086J
This PI communicates a procedure to clean oil leaking from the rain sensor.
N252494770
Amendments to the Song-Beverly Act (SBA) California warranty law provides vehicle owners with an opportunity to submit a written notice to GM before filing a lawsuit seeking a vehicle repurchase. If such a notice is not provided to GM, then the vehicle owner is prevented from seeking civil penalties in litigation. Vehicle owners of the applicable vehicles will be mailed an owner’s manual and warranty insert containing this information in English and Spanish.
PIT6400
This PI Communications information on an alternative product dealers can use to perform 19-NA-255: Wax Coating on Frame Peeling, Metal Shows Corrosion/Rusting due to issue with getting product from current supplier listed in the bulletin.
PIP6068
This preliminary information advises dealers that Engine Control Module designation E90 is on a ordering restriction through technical assistance.
PIT6398
This PI involves DTC U3000 SYM49 Set falsely In The Serial Data Gateway Module and dealerships are to reset the module by cycling the battery.
PIT6180A
This Preliminary information communicates assistance in locating the Rear seat belt comfort guides in the parts catalog.
PIP4902S
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
25-NA-156
This service bulletin provides information on Tire Sidewall Irregularities.
00-06-01-026R
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
PIT5074R
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
N252494003
Certain vehicles listed above, may have a condition where the connecting rod and/or crankshaft engine components in these vehicles may have manufacturing defects that can lead to engine damage and engine failure. This special coverage covers if an engine failure occurs in the vehicle as a result of the condition described above for a period of 10 years or 150,000 miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after May 23, 2025, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to May 23, 2025, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to replace the engine. The repairs will be made at no charge to the customer.
PIT5966E
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and how to reset/clear the message.
22-NA-182
This service bulletin advises the technician to check if the transmission cooler lines are twisted to correct customer concerns of Harsh Shift, Shudder, Surge, Stall, Transmission Overheating and/or High Transmission Fluid Temperature.
23-NA-170
This bulletin advises the tech to inspect deeper into what may be to main cause of an engine failure.
23-NA-153
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
25-NA-118
This service bulletin provides information for the technicians to use a Customer Concern Verification sheet to facilitate the questions needing to be answered by the customer regarding Automatic Emergency Braking (AEB) issues.
15-NA-010
This service bulletin provides information to dealership personnel for new vehicles with less than 1,000 miles that may not pass California smog inspection or smog inspection in other states.
PIT6373
This Preliminary information communicates possible normal rear heater performance operation at idle.
PIT6056A
This Preliminary information communicates how to erase a DTC that is falsely setting due to a software concern with the Image Processing Module
25-NA-100
This warranty administration bulletin provides policy information on vehicles outside of a California Emissions State who move to and register their vehicle in a California Emission State may be entitled to the 7 year, 70,000-mile Emission Select State Component Limited Warranty.
PIT6110F
This Preliminary information communicates an issue with the SES MIL and DTC P062B /P060C and engineering is currently investigating.
PIT6144G
This Preliminary information communicates A diagnostic tip from root causing DTC: C1197 SYM 92 caused by a pinched air inlet hose to the suspension compressor air leveling system or internal software concern
PI0281L
This preliminary informational (PI) bulletin provides information to dealership personnel that may be helpful when addressing underbody component corrosion with customers.
24-NA-022
This technical bulletin provides repair information to correct a customer concern of SUV Second Row Seat Bolt Torque Pattern.
PIP6008E
This Preliminary information communicates a possible retainer ring dis-lodged for a DTC P2714, may not have reverse as well.
21-NA-166
This informational bulletin provides information on the turn signal stalk not cancelling and/or mis cancelling.
24-NA-139
This service bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Malfunction Indicator Lamp (MIL) Illuminated – DTC P023F or P129F Set.
PIT5551R
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
24-NA-229
This bulletin provides a procedure on how to check for a battery drain utilizing the Picoscope and how to measure the load on the system that may be causing a drain.
07-00-89-037W
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
PIT5986D
This Preliminary information communicates a diagnostic tip for a thump, click, pop, clunk type noise that is heard from the front end. Dealers are to inspect for something contacting the grill shutters as they open and close.
PIT5851F
This Preliminary information communicates an issues with the odometer being incorrect after a programming event and how the dealership can resolve the issue.
25-NA-087
This service bulletin provides information on the proper Reflective High Temperature Heat and/or Insulating Tape to use for certain repairs, such as Wiring Harness Repairs.
13-08-116-001K
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
23-NA-185
This service bulletin helps diagnose/reduce possible CCND issues on Transfer Cases - Service 4WD on DIC, Intermittent Failures, Noise Concerns, Driveline/Steering Vibration/Shudder, Intermittent DTCs/MIL Illuminated, Engagement/Disengagement/Ratcheting Concerns.
25-NA-052
This bulletin advises the technician to flush the cooling system multiple times if oil has been found in the cooling system and replace the parts that may be contaminated due to oil in system.
PIT6110E
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently investigating.
24-NA-098
This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
25-NA-065
This informational bulletin instructs the tech when fuel/fluid is needed to be tested and where it can be sent for analysis.
08-03-10-006I
This service bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion.
15-06-03-001F
This service bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.
19-NA-255
This service bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
PIE0812A
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to the vehicle having loss of power and/or having the MIL illuminated on DIC.
PIT5993D
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
17-NA-073
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
24-NA-099
This bulletin provides a service procedure to replace the sway bar bracket retainers if found the cause of the clunking noise from front of vehicle.
PIE0820A
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to the power sliding console being inoperative.
PIE0820
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the power sliding console being inoperative.
PIT5981B
This Preliminary information communicates a tip when diagnosing an inoperative air leveling suspension system and to repair any loss of comm DTC's with the power window motors first.
PIT6144F
This Preliminary information communicates A diagnostic tip from root causing DTC: C1197 SYM 92 caused by a pinched air inlet hose to the suspension compressor air leveling system or internal issue with compressor assembly.
05-03-07-009L
This service bulletin provides information on Wheel Alignment Specifications, Requirements and Recommendations for GM Vehicles.
11-00-89-005Y
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIT6344
This Preliminary information communicates an issue with blower motor speed changing when air flow is blocked by snow.
PIT5734H
This Preliminary information communicates an issue with poor heater performance and advises dealerships to inspect the heater core inlet and outlet hoses for being twisted or kinked.
05-08-51-001L
This informational bulletin provides a procedure on how to remove the paint stain that may present itself under the shipping film.
16-NA-109
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
PIP6008D
This Preliminary information communicates a possible retainer ring dis-lodged for a DTC P2714, may not have reverse as well.
PIT5551Q
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
PIT6276A
This Preliminary information communicates an issues with a service keyless entry message caused by aftermarket door handle covers and they should be removed.
25-NA-032
This bulletin provides information to the tech on how to diagnosis the EGR system from possible issue that may cause the DTCs to set and cause the customers concern of a MIL Illuminated.
07-00-89-037V
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
24-NA-264
This bulletin helps aid the tech in possible noise that may be normal or abnormal depending on the concern noted.
PIT6144E
This Preliminary information communicates A diagnostic tip from root causing DTC: C1197 SYM 92 caused by a pinched air inlet hose to the suspension compressor air leveling system or internal issue with compressor assembly.
PIT6132B
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed. Engineering is working on a new HVAC door seal material to correct the noise.
PIT5479G
This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston installation. This grease can be cleaned off and the rest of the service completed.
PIT5990C
This Preliminary information communicates an issue with a wind noise while driving at highway speeds and dealers are to inspect the body harness pass through for being full seated into the cowl.
PIP5175F
This Preliminary Information communication provides information to the technician about vehicles that may have a delayed engagement into drive, shudder at a launch, or the transmission is slipping when shifting into 1st, 2nd, 3rd or 4th gears. This may be due to loose stator support to pump cover bolts causing a leak at the stator support to pump cover gasket. Technician will check for the bolts to be loose. If any of the bolts are loose or the gasket is misaligned or leaking, the transmission pump cover must be replaced and the 1234 clutch plates should be inspected for being distressed and repaired as needed.
10-08-110-001L
This service bulletin provides information on proper use of floor mats.
21-NA-043
This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
22-NA-074
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
22-NA-244
This warranty administration service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.
23-NA-064
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships.
PIT6144D
This Preliminary information communicates A diagnostic tip from root causing DTC: C1197 SYM 92 caused by a pinched air inlet hose to the suspension compressor air leveling system or internal issue with compressor assembly.
21-NA-135
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content.
N242454441-02
Certain vehicles listed above, may have a condition where the transmission control valve has worn, resulting in a gradual loss of pressure within the valve. The effects can cause harsh shifting, setting a service engine soon message, reduced engine performance or P0747 diagnostic trouble code. This special coverage covers the condition described above for a period of 15 years or 150,000 miles (240,000km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after November 26, 2024, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to November 26, 2024, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to install a new control valve body. The repairs will be made at no charge to the customer.
PIE0812
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to the vehicle having loss of power and/or having the MIL illuminated on the Driver Information Center (DIC).
01-08-42-001Q
This service bulletin provides information on Exterior Lamp Condensation and Water Leak Information and Replacement Guidelines.
PIP6008C
This Preliminary information communicates a possible retainer ring dis-lodged for a DTC P2714, may not have reverse as well.
PIT5832U
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
PIT5985J
This Preliminary information communicates diagnostic tips on how to resolve a issues with vehicles that will not power up after a can bus 2 issue, lightning strike, or a failed over the air update.
21-NA-155
This informational bulletin advises the technician to check for faults that may be caused by the trailer otherwise found by a possible faulty trailer connector.
24-NA-239
This informational bulletin provides a guide on how to diagnose and test for vibrations utilizing the PicoScope.
22-NA-150
This technical bulletin provides a procedure to program the Reductant Control Module and Setup and Perform the Reductant Fluid Tank Level Reset.
24-NA-173
This bulletin advises the technician that if the code sets, verify the sensor then inspect the engine oil pump for a sticking valve that may cause the MIL to illuminate.
09-06-04-026Z
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
22-NA-218
This informational bulletin advises the technician on normal noises produced by the engine and to explain this to the customer.
PIP6008B
This Preliminary information communicates a possible retainer ring dis-lodged for a DTC P2714, may not have reverse as well.
PIT5828D
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
20-NA-166
This service bulletin advises the technician of possible coolant entering the areas of the engine, either through failed parts or defects in the castings, that may be the cause of the concerns related to the MIL or the engine running rough.
20-NA-132
This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
07-00-89-037U
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
24-NA-073
This technical bulletin provides a procedure to inform drivers that under certain driving conditions such as hilly or mountainous roads accompanied with frequent braking, that the original equipment front brake pads may wear prematurely.
21-NA-091
This service bulletin provides information for customers/dealers/technicians on Normal Camera Display Operation - Flashing Diamond - Spot - or UFO like image on Camera Display.
PIT6134F
This Preliminary information communicates an issue with premature brake pad life and engineering is working on release new pad lining material.
21-NA-028
This technical bulletin provides a procedure to replace the rear diff fluid to correct the rear clutches from chattering, which create a moan type noise.
PIT6265B
This Preliminary information communicates to dealership technicians that if they encounter a vehicle with this issue, they can contact TCSC to have the software for the MDI backdated to communicate properly.
18-NA-263
This warranty administration bulletin provide policy information for variable diagnostic time allowances on select labor operations (U.S. Only).
PIT5985G
This Preliminary information communicates diagnostic tips on how to resolve a issues with vehicles that will not power up after a can bus 2 issue, lightning strike, or a failed over the air update.
PIT5832S
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
N242454441-01
Certain vehicles listed above, may have a condition where the transmission control valve has worn, resulting in a gradual loss of pressure within the valve. The effects can cause harsh shifting, setting a service engine soon message, reduced engine performance or P0747 diagnostic trouble code. This special coverage covers the condition described above for a period of 15 years or 150,000 miles (240,000km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after November 26, 2024, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to November 26, 2024, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to install a new control valve body. The repairs will be made at no charge to the customer.
PIT5801E
This Preliminary information communicates an issue with how to properly inspect and ensure the air lines for the air suspension system are fully seated.
PIT5074Q
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIT5962B
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
PIT5923C
This Preliminary information communicates the proper component naming and labor operation codes for the air leveling system RPO F47and the Electronic Suspension Control System RPO Z95
PIT5993C
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
08-07-30-035I
This service bulletin provides information on the harmful effects of ethylene glycol in transmission fluid.
21-NA-275
This service bulletin provides repair information to correct customer concerns of Wheel Lock Up, ABS Event, Loud Bang and a Flashing “D” on Driver Information Center (DIC) when Lightly or Moderately Accelerating Forcing an 8-7 or 8-6 Downshift.
N242454441
Certain vehicles listed above, may have a condition where the transmission control valve has worn, resulting in a gradual loss of pressure within the valve. The effects can cause harsh shifting, setting a service engine soon message, reduced engine performance or P0747 diagnostic trouble code. This special coverage covers the condition described above for a period of 15 years or 150,000 miles (240,000km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after November 26, 2024, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to November 26, 2024, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to install a new control valve body. The repairs will be made at no charge to the customer.
17-NA-271
This service bulletin provides a procedure to clean the back side of the rims and rotors and to correct the customer concern of wheel clicking.
22-NA-238
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative.
19-NA-219
This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
22-NA-168
This bulletin provides diagnostic information when checking the exhaust system for leaks.
23-NA-167
This informational bulletin provides information on Outside Rear View Mirror Defog or Defrost Times Different for Passenger and Driver Mirrors.
PIT6279B
This Preliminary information communicates an issue where the odometer mileage is incorrect after performing a module setup procedure and a FSE will be dispatched to the vehicle to correct the odometer error.
PIT6134E
This Preliminary information communicates an issue with premature brake pad life and engineering is working on release new pad lining material.
PIT6265A
This Preliminary information communicates to dealership technicians that if they encounter a vehicle with this communication issue, they can contact TCSC to have the software for the MDI backdated to communicate properly.
PIT6276
This Preliminary information communicates an issues with a service keyless entry message caused by aftermarket door handle covers and they should be removed.
PIT6279
This Preliminary information communicates an issue where the odometer mileage is incorrect after performing a module setup procedure and a FSE will be dispatched to the vehicle to correct the odometer error.
04-06-01-029K
This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules.
PIT5832R
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
PIT5985F
This Preliminary information communicates diagnostic tips on how to resolve a issues with vehicles that will not power up after a can bus 2 issue, lightning strike, or a failed over the air update.
PIE0804A
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to a Chirp, Squeal, and/or Whine Type Noise Heard from Front of Vehicle During a Cold Start and/or While in Operation.
PIP4723J
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIT5698E
This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
PIT6134D
This Preliminary information communicates an issue with premature brake pad life and engineering is working on release new pad lining material.
PIT6147A
This Preliminary information communicates information on how to select bootloader part number if there are issues SPS programming the IPC.
PIT6243
This Preliminary information communicates how to find and address aftermarket Equipment that prevents Supercruise from engaging.
PIT6265
This Preliminary information communicates to dealership technicians that if they encounter a vehicle with this issue, they can contact TCSC to have the software for the MDI backdated to communicate properly.
21-NA-184
This service bulletin provides a procedure to update the calibrations after Window Regulator electronics or window motor replacement.
PIP6008A
This Preliminary information communicates a possible retainer ring dis-lodged for a DTC P2714, may not have reverse as well.
PIT5941B
This Preliminary information communicates a issue where the rear windshield wipers will not be in the park position and will cause the rear back glass not to open with the switch or the RKE fob. This explains how to repair that concern.
PIT6110D
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is working on a fix.
PIT6134C
This Preliminary information communicates an issue with premature brake pad life and engineering is working on release new pad lining material.
PIT6234
This Preliminary information communicates an issue with an aftermarket device wired into the vehicle and cause the vehicle to turn off when shifted into gear. This PI provides a diagnostic tip to inform dealership to inspect for this aftermarket device before further diagnostics is performed.
PIT5569C
This Preliminary information communicates direction and examples when diagnosing multiple DTCs, one of which includes U**** Byte 71 DTC.
PIP6015
This Preliminary information communicates to the dealer a process for accessing the procedure to add attachments to a GM technical assistance case using the dealer case management tool.
24-NA-225
This bulletin provides information on how to look for and test for DEF or water in the fuel system and what the specs should be.
24-NA-040
This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC.
10-00-89-009F
This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S).
24-NA-196
This informational bulletin advises the tech and the customer of a normal DEF operation while under high load conditions and when the time is right to fill the DEF at that time frame.
24-NA-219
This technical bulletin provides a procedure to correct the condition of Striker to Liftglass Latch Creak Noise.
PIT6255
This Preliminary information communicates a diagnostic tip when experiencing an error when trying to perfom a trim height learn or review pressure data in GDS
01-06-01-011Q
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
PIP5621E
This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
99-00-89-019Z
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program.
07-00-89-037T
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
23-NA-154
This bulletin provides information on Warranty Administration – Required Operating Procedures - 8 Points (U.S. Only).
24-NA-167
This technical bulletin provides repair information to correct a customer concern of Shake and/or Shudder During Steady Speed and/or Light Throttle Acceleration Between 25 and 50 MPH (40 and 80 KM/H).
PIT5551P
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
04-06-04-051J
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
PIE0804
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on hearing one or more of the following noises coming from the front of the vehicle during a cold start and/or while in operation.
23-NA-219
This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
20-NA-138
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
08-07-30-026I
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
PIP5949A
This Preliminary information communicates to the dealer, a potential rough running condition following an autostop event that is caused by the incorrect crankshaft position sensor.
18-NA-146
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
PIT5966D
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and how to reset/clear the message.
PIT6132A
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed. Engineering is working on a new HVAC door seal material to correct the noise.
PIT5985E
This Preliminary information communicates diagnostic tips on how to resolve a issues with vehicles that will not power up after a can bus 2 issue, lightning strike, or a failed over the air update.
PIT6110C
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is working on a fix.
PIT5099H
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIC6086H
This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
PIT5509L
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System” message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system that is being used. The Chassis Control Module can be sensitive to a variety of trailer wiring issues. The technician will need to make a trailer tester using Electric Trailer Brake Magnets and 7-way trailer connector to determine if it is a vehicle or trailer issue. If the concern is not duplicated with the tester installed, the vehicle is operating correctly and the focus should be on the trailer wiring or 7 way connector.
PIT6212
This Preliminary information communicates an issue with the Hydrastar Electric Over Hydraulic trailer brake system causing a voltage spike into the trucks electrical system which is causing DTC C1114 to set.
07-00-89-036K
This service bulletin provides information on Enhancing Field Product Reports with Digital Pictures.
21-NA-281
This service bulletin provides diagnostic information for technicians in cases of an ETRS system fault or a no start condition - If the vehicle needs to be moved, it is recommended to use wheel dollies, tire skates or the NEW Manual Park Release tool DT-52910.
02-00-89-002X
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
PIC5650L
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIP5964D
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated and code P023F or P129F is found.
PIT3271P
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT6134B
This Preliminary information communicates an issue with premature brake pad life and engineering is working on release new pad lining material.
PIP5832A
This Preliminary information communicates to the dealer an issue where a vehicle may be exhibiting an engine noise condiion. The dealer is instructed on how to isolate the noise to a specific area of the engine for further diagnosis.
PIT5851E
This Preliminary information communicates an issues with the odometer being incorrect after a programming event and how the dealership can resolve the issue.
PIT5854B
This Preliminary information communicates information on vehicle speed being limited due to aftermarket lower kit being installed on the vehicle.
PIT5990B
This Preliminary information communicates an issue with a wind noise while driving at highway speeds and dealers are to inspect the body harness pass through for being full seated into the cowl.
21-NA-149
This service bulletin provides repair information for Engine Wire Harness Chafing to correct customer concerns of IPC Gauges Sweep, IPC Warning Message, SES/Check Engine/MIL, No Start/ No Crank, Runs Rough, Stalls, Reduced Engine Power, Various DTCs.
N222389722
Certain vehicles may have a condition in which a transmission control body screen detaches from the spacer plate when the vehicle is operated in extremely cold weather conditions. Dealers are to reprogram the Transmission Control Module.
24-NA-174
The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect.
General Communication
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
05-03-08-002J
This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
N242441450
Service Update. On certain vehicles listed above, the vehicle may not re-start after an auto stop event. Dealers will reprogram the engine control module.
18-NA-073
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
23-NA-044
This service bulletin provides information on AGM batteries that require less frequent charging in storage.
PIT5481J
This Preliminary Information communication provides information to the technician with additional information on the functionality of Lane Keep Assist. Starting with 2016 model year Lane Keep Assist Regular Production Option Code (UHX) replaced Lane Departure Warning Regular Production Option Code (UFL). Lane Keep Assist is designed to assist the driver in keeping the vehicle from drifting out of a driving lane that has clearly identified markings. The electric power steering provides a gentle steering correction if a lane marking has been crossed and the driver has not actively responded.
PIT5918B
This Preliminary information communicates an issue where GM Accessory Illuminated Emblem may cause an issue with the left headlight/turn signal and dealership are to disable the Accessory Illuminated Emblem until a fix is available.
PIT5985D
This Preliminary information communicates diagnostic tips on how to resolve a issues with vehicles that will not power up after a can bus 2 issue, lightning strike, or a failed over the air update.
PIT6033A
This Preliminary information communicates an issue with a clunk pop squeak type noise from the rear of the vehicle and dealerships are to inspect the torque of the rear sway bar links.
PIT6036A
his Preliminary information communicates an issue that when an engine mount is replaced there may be additional parts replaced along with the engine mount and dealership are to reference the parts catalog to determine if additional parts are needed.
PIT6110B
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is working on a fix.
PIT5801D
This Preliminary information communicates an issue with how to properly inspect and ensure the air lines for the air suspension system are fully seated.
PIT5923B
This Preliminary information communicates the proper component naming and labor operation codes for the air leveling system RPO F47and the Electronic Suspension Control System RPO Z95
PIT6015B
This Preliminary information communicates an issue with how to properly inspect and ensure the air lines for the air suspension system are fully seated.
PIT5832P
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
PIT6144A
This Preliminary information communicates A diagnostic tip from root causing DTC: C1197 caused by a pinched air inlet hose to the suspension compressor air leveling system.
PIC6551
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
PIP5569B
This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer of a repair kit they received that will prevent this issue when installed correctly.
PIT5195H
This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
PIT5800C
This Preliminary information communicates and issues with Fuse F49 blowing causing a SES MIL and a Service Theft Deterrent System message displayed in the DIC. It instructions dealership to inspect the 12 volt power accessory port for shorting out.
PIT5832M
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
PIT5832N
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication configuration did not complete correctly.
PIT5986B
This Preliminary information communicates a diagnostic tip for a thump, click, pop, clunk type noise that is heard from the front end. Dealers are to inspect for something contacting the grill shutters as they open and close.
PIT5993B
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
PIT6102A
This Preliminary information communicates the possibility of their IP speaker(s) either blown or inoperative.
PIT6134A
This Preliminary information communicates an issue with premature brake pad life and engineering is working on release new pad lining material.
PIT6180
This Preliminary information communicates assistance in locating the Rear seat belt comfort guides in the parts catalog.
19-NA-237
This service bulletin explains how to identify possible DEF system contamination.
01-00-89-010S
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
16-NA-244
This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
16-NA-380
This service bulletin provides a diagnostic aid procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
23-NA-011
This Informational bulletin advises the technician of possible areas the oil may leak from the engine.
24-NA-043
This bulletin advises the tech that there are extra characters on the fuel injector and to ignore the last numbers when identifying flow rate.
07-06-01-016J
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
23-NA-141
This informational bulletin advises the technician that the engine and related parts will be debited if found that the tech did not properly prepare the engine block from dirt and debris in bolt holes or if found that the block was damaged by the tech.
00-06-01-012N
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
05-06-04-022V
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
16-NA-222
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
09-06-04-026Y
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
01-06-01-011P
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
18-NA-103
This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.
21-NA-271
This bulletin advises the technician of a possible kinked coolant hose that might be causing the customers concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P026A Set.
18-NA-306
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
20-NA-090
This informational bulletin provides a way for the technician to identify if the ECM has been modified.
20-NA-082
This informational bulletin explains why more DEF is being used in diesel engines due to new emission standards.
PI0754G
This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
16-NA-158
This service bulletin describes the U.S. Dealer Special Tool Loan Program process.
18-NA-279
This service bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
12-01-37-001G
This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
24-NA-141
GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
20-NA-038
This informational bulletin explains the difference in AFM and DFM engines and what is and is not activated during this occurrence.
00-03-10-002M
This service bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
23-NA-142
This technical bulletin provides a procedure for the techs to replace the forward check ball and separator plate if found the cause of the customers concern of No Forward Gear When Shifting from Park to Drive and/or Reverse to Drive.
17-NA-157
This service bulletin explains the difference in oil filters for gas engines with new oil pump control systems and the possibilities of what may happen using the incorrect filter.
22-NA-248
This technical bulletin provides service information to correct a customer concern of HVAC Heat Intermittently Inoperative, DTCs B2B05 and/or B2B06 Set.
99-04-20-002O
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
04-06-04-051I
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
16-NA-383
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
22-NA-070
This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
18-NA-099
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
22-NA-018
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only).
19-NA-218
This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
18-NA-125
This service bulletin provides information for engine oil life monitor operation calculation.
21-NA-068
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with RPO ATH and AVJ.
20-NA-016
This Warranty Administration bulletin provides information on customer vehicles concern results in a manufacturer repurchase from the customer, GM depends on the dealership to host and administer the repurchase closing and intake of the returning vehicle.
23-NA-032
The informational bulletin advises the tech to use the glow plug bore cleaner to reduce the chance of soot building up on the glow plug causing a premature failure.
08-07-30-035H
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
19-NA-136
This service bulletin provides a diagnostic procedure to aid in correcting a customer concern of a Howling, Whining/Whirring Noise, Shudder/Vibration and/or Grinding Noise While in 4HI, 4HI Auto and/or During Parking Lot Maneuvers in Auto Mode.
16-NA-119
This warranty administration bulletin provides policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
09-00-89-008G
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
18-NA-067
This service bulletin provides information for cleaning brake dust off of aluminum or chrome wheels.
18-NA-361
This technical bulletin provides a procedure to flush the cooler lines to validate if there is excessive debris in the fuel system caused by a failed part.
22-NA-106
This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires.
06-00-89-029V
This service bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
10-08-110-001K
This service bulletin provides information on proper use of floor mats.
13-08-116-001J
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
15-00-89-004G
This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
23-NA-125
This service bulletin provides information for dealers/technicians on Over The Air (OTA) and In Market Enhancement (IME) FAQs.
24-NA-070
This bulletin provides a procedure to program the ECM if the DTC is set and/or the start/stop doesn't restart after a stop.
00-03-10-006P
This service bulletin provides information for dealers/technicians on Tire Radial Force Variation (RFV).
17-NA-052
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed.
22-NA-258
This technical bulletin provides a procedure to program the TCM and replace the control valve body if the conditions are found to be the cause of the failure of the valve body.
24-NA-062
This technical bulletin provides repair information to correct a customer concern of the E88 Front Floor Console Bin Lamp Inoperative.
10-08-45-001H
This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
PIP5964C
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated and code P023F or P129F is found.
23-NA-103
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC).
PIP5964B
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
24-NA-060
This service bulletin provides repair information to correct a customer concerns of Radio Software issues.
22-NA-057
This technical bulletin provides a procedure replace the tappet that is located on the fuel door.
07-00-89-037S
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
11-00-89-005X
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIP5964A
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
PIP5596A
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
23-NA-043
This service bulletin provides a procedure to replace the valve lifter and guides to correct customer concerns of Poor Engine Performance, Engine Misfires, Malfunction Indicator Lamp (MIL) Illuminated - DTC P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308 Set.
24-NA-020
This service bulletin provides a repair procedure to correct customer concerns of Service Emissions System Displayed on DIC, MIL Illuminated with DTC P249C and/or P20E8 Set.
PIP5964
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
PIT4322P
This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
20-NA-018
This service bulletin provides information for dealers/technicians on MDI 2 Required When Programming Vehicles with Vehicle Intelligence Platform (VIP).
19-NA-044
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
16-NA-338
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
23-NA-055
This service bulletin provides information on the EL-52800 Diagnostic & Charge Battery Station (DCBS) â FAQs.
23-NA-189
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present on network communication circuits.
21-NA-132
This informational bulletin provides Changes to the Automatic Stop/Start feature for Certain 2021 Escalade models, Silverado 1500, Suburban, Tahoe, Sierra 1500, Yukon models Equipped with RPO NSS.
PI0281K
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
02-08-42-001J
This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
PI1394B
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
PIT6084A
This PI states that a vehicle may exhibit a concern of the cross traffic alert indicators not displaying on the radio screen. While this is a customer dissatisfier, it does not pose a safety concern due to the fact that the customer will still be alerted to an approaching vehicle by the seat vibration. Dealers are advised that engineering is working on a resolution and it will be available by the end of 2023.
PIT5828C
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
PI0592I
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
23-NA-127
This technical bulletin provides a procedure to correct the condition of Second Row Seat Loose and/or Clicking.
18-NA-180
This Warranty Administration Bulletin Provides High Voltage Battery Exchange Process Information.
PIT5074P
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIT5962A
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
PIT6097B
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones.
PIT6102
This Preliminary information communicates the possibility of their IP speaker(s) either blown or inoperative.
PIT6097A
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones.
PIT6097
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones.
PIT5851D
This Preliminary information communicates an issues with the odometer being incorrect after a programming event and how the dealership can resolve the issue.
23-NA-206
This service bulletin provides information for dealers/technicians on History DTCs To Ignore / NO SES / NO Malfunction Indicator Lamps / NO Warning Messages.
PIT5214F
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
22-NA-251
This service bulletin provides a procedure to replace the front wheel drive shaft to correct a customer concern of a Squeak/Chirp Noise from Front Axle in 2wd.
PIT6084
This PI states that a vehicle may exhibit a concern of the cross traffic alert indicators not displaying on the radio screen. While this is a customer dissatisfier, it does not pose a safety concern due to the fact that the customer will still be alerted to an approaching vehicle by the seat vibration. Dealers are advised that engineering is working on a resolution and it will be available by the end of 2023.
03-00-91-001I
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns.
PIP5949
This Preliminary information communicates to the dealer, a potential rough running condition following an autostop event that is caused by the incorrect crankshaft position sensor.
20-NA-159
This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
22-NA-225
This information bulletin advises the technician the difference between a welch cap leak and the output seal of the t-case or transmission leaking ATF, causing the customer concern of a Red Fluid Leak from Center of Vehicle Located by Rear of Transmission or Transfer Case Area.
PIE0764A
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to a binding, moan and/or chatter type sound heard from the rear of the vehicle when making slow parking lot maneuvers.
05-00-89-029F
This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
01-06-01-011O
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
17-NA-170
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
PIT5966C
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and how to reset/clear the message.
99-00-89-019Y
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program.
02-00-89-002W
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
10-00-89-006J
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
PIT5099G
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIT5698D
This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
22-NA-015
This informational bulletin provides graphs to help identify possible issues that may cause shaking and shudders and what may be the cause of said issue.
PIT5941A
This Preliminary information communicates a issue where the rear windshield wipers will not be in the park position and will cause the rear back glass not to open with the switch or the RKE fob. This explains how to repair that concern.
23-NA-155
This technical bulletin provides a procedure to correct the condition of Accessory Roof Rack Cross Rail, Luggage Carrier Cross Rail Key Stuck in Lock, Lock Stuck or Inoperable.
PIT5869A
This Preliminary information communicates an issues with an SES MIL, A/C blowing warm air and DTC's B1AA3 U3018 U3505 due to Fuse F4DR open. Dealers are to inspect the wiring in the front floor console.
PIP5621D
This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
22-NA-187
This informational bulletin advises the tech to inspect the transfer case motor electrical connectors for possible damage or corrosion that might be caused by a damage grommet inside the electrical connector.
PIT6050
This Preliminary information communicates to dealership technicians that if they receive a radio with the 2 stickers as noted above, the radio was remanufactured with missing components and will need to order another radio unit from the ESC to properly repair the vehicle at this time.
09-00-89-016H
This Warranty Administration bulletin provides information on the proper use of the labor operation 0600014.
23-NA-138
This informational bulletin advises the tech the possible causes of the DTCs that set and how to maintenance the issue.
PIP5628G
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
N23-241182
(There may be future updates under this same release number.) Your vehicle keeps getting better. This software update includes the following if your vehicle is equipped: Refinements: Updates made to improve the Super Cruise driver assistance technology and the Adaptive Cruise Control functionality. Updates to improve the connectivity within Apple CarPlay & Android Auto. A variety of other minor software updates to make your driving and in-vehicle experience better.â Better Never Stopsâ¢
15-00-89-004F
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
10-06-05-002M
This informational bulletin provides information on Clean Exhaust Filter See Owner Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
01-00-89-010R
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
03-06-04-017T
This service bulletin provides information on availability of Diesel Fuel additives.
04-06-04-051H
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
N23-241156
'(There may be future updates under this same release number.) Your vehicle keeps getting better. This vehicle software update includes the following: Refinements: â¢Updates made to the overall vehicle software update process. Better Never Stopsâ¢
09-06-04-026X
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
22-NA-232
This informational bulletin advises the technician of a possibly noise coming from the transmission oil pump.
17-NA-066
This service bulletin provides information for automatic transmission Oil Cooler Flush and flow test.
22-NA-209
This technical bulletin provides repair information to correct a customer concern of Articulating Running Board Inoperable.
PIP5358C
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
21-NA-026
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
23-NA-085
This technical bulletin provides a procedure to correct the condition of Service Restraint System Message / Air Bag Warning MIL / DTC B14DC Set.
99-09-40-005I
This service bulletin provides information on availability for a seat belt extender.
PIP4902R
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
01-06-01-011N
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
99-08-51-001F
This service bulletin provides information on Paintless Dent Repair Process.
21-NA-005
This technical bulletin provides a procedure to replace the air bag and air bag harness to correct a condition of Airbag Malfunction Warning and Airbag Malfunction Indicator Illuminated with DTC B0001-1B due to corrosion.
23-NA-042
This service bulletin provides repair information to update radio software to correct customer concerns of Software related issues.
23-NA-108
This service bulletin provides repair information to dealers to Replace Video Processing Module (VPM) When Programming Fails.
23-NA-007
This service bulletin provides repair information to correct a customer concern of Black Radio Display Screen (Triangle and Camera with Slash Through it) with DTCs B1A62 82 and 86 Setting Current in Video Processing Module (VPM).
PIT5966B
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and how to reset/clear the message.
21-NA-061
This service bulletin provides information for dealers on Using EL-52545 When Diagnosing PEPs Transmitter Key Fobs.
PIT4261J
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
04-07-30-013E
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use.
02-00-89-002V
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
23-NA-099
This service bulletin provides repair information to correct a customer concern of Black Radio Display Screen (triangle and camera with the slash through it) with DTCs B1A62 82 and 86 setting current in Video Processing Module (VPM).
08-07-30-026H
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
12-03-10-001E
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel).
PIC5650K
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
23-NA-087
This technical bulletin provides multiple procedures and information in regard to possible waterleaks.
22-NA-153
This technical bulletin provides a step by step procedure to replace the pressure relief valve due to Flutter Noise from Right Rear Corner of the Vehicle.
01-08-42-001P
This service bulletin provides information on Exterior Lamp Condensation and Water Leak Information and Replacement Guidelines.
11-00-89-005W
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIP5628F
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
12-03-10-001D
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel).
04-00-89-015Z
This bulletin provides information on Warranty Administration â Required Operating Procedures - 8 Points (U.S. Only).
21-NA-227
This informational bulletin provides a possibly source of corrosion in the RDM electrical wiring harness and connector.
22-NA-247
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely set for eBoost applications.
08-07-30-035G
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
10-08-110-001J
This service bulletin provides information on proper use of floor mats.
11-00-89-005V
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PI0281J
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
22-NA-098
This technical bulletin has you remove flash and reinstall clip to correct condition of Arm Rest Does Not Lock in Position and Slides Back and Forth.
03-06-04-017S
This service bulletin provides information on availability of Diesel Fuel additives.
00-06-01-012M
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
00-06-01-026Q
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
21-NA-106
This service bulletin provides information for the technician that may experience a condition when after performing a DTC Clear/Reset on the TCM during diagnosis or after completion of a transmission repair or replacement, the DTCs did not clear or appear to reset on the next engine start.
22-NA-009
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
07-06-01-016I
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
10-06-05-002L
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
PIP5776H
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
15-NA-017
This Warranty Administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment.
23-NA-026
This technical bulletin provides repair information to correct a customer concern of LM2 Engine Calibration Update for DTC P003A.
22-NA-127
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues.
N212355140-01
Service Update- Certain vehicles may have a condition where the engine control module calibrations can be enhanced to improve the accuracy of certain diagnostic tests. Dealers are to reprogram the engine control module.
PI0754F
This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
22-NA-220
This technical bulletin provides a procedure to replace the fuel feed line if found the cause of the failure which set the DTC.
99-04-20-002N
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
PIT4322N
This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
01-08-42-001O
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
PIP5628E
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIP5900
This Preliminary information communicates to the dealer a diagnostic and repair direction to a possible engine crankshaft bearing failure.
21-NA-284
This technical bulletin provides repair information to correct a customer concern of the 60% rear seat will not fold down.
22-NA-115
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention.
23-NA-006
This technical bulletin informs the dealer to add foam to the base of the clips to correct the condition of Instrument Panel Trim Plate Applique Loose.
00-00-90-002M
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks.
07-03-16-004E
This service bulletin provides information for tire pressure monitoring (TPM) system concerns.
PIE0721A
This engineering information (EI) ends the need for gathering information from technicians in regards to the roof panel joint finish molding being detached and/or loose from the roof retaining clip.
21-NA-095
This technical bulletin provides a procedure to seal the exhaust at the UFSCR and Tailpipe flange.
N212355140
Service Update Bulletin - Certain vehicles may have a condition where the engine control module has an incorrect calibration. Dealers are to reprogram the engine control module.
02-00-89-002U
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
21-NA-244
This service bulletin provides a repair procedure to correct a customer concern of a No Fob detected message on Driver Information Center (DIC) and/or No Crank / No Start condition.
22-NA-087
This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated with DTC P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 Set.
21-NA-081
This technical bulletin provides a procedure to locate a possible short in the engine wiring harness.
22-NA-257
This service bulletin provides information on Dealer Installed LPO Wheel Installation and Return Process.
09-00-89-008F
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
PIP5540J
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
21-NA-124
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
PIP5632G
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4902Q
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIT3271N
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
22-NA-052
This service bulletin provides repair information to correct a customer concern of DTC B1038 SYM64 set in the BCM and Door Ajar Message on Driver Information Center (DIC).
22-NA-216
This bulletin advises the technician to Inspect the position of the head gasket locating tabs to determine if the head gasket(s) has been possibly installed backwards to correct a concern of an Engine Thermostat Tick Noise and/or Running Hot.
22-NA-222
This technical bulletin provides a procedure to remove the conduit from the harness for the accelerometer to correct the condition of Message âService Suspension Systemâ Displayed and/or DTC C102Exx.
22-NA-227
This technical bulletin provides repair information to correct a customer concern of the Rear Washer System Inoperative, or Boot to Washer Hose Disconnection and Possible Hose Leaking.
22-NA-214
This service bulletin provides a procedure to repair a customer concern of Stop/Start System Inhibited / IBS / Battery Monitor with Module Malfunction Indicator Light (MIL) Illuminated - DTC U152D, P15FF, P305D, P305E, U01B0 Set.
22-NA-205
This service bulletin provides information on Module Harvesting.
PIE0721
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the roof panel joint finish molding being detached and/or loose from the roof retaining clip.
PIT5940A
This Preliminary information communicates that a customer may notice that the gridlines on the backup camera are very dim. They may mention that this occurred after an OTA update. The dealer technician is advised to perform no repairs. The technician is advised that engineering is looking into a resolution and the resolution will be communicated through this PI or a bulletin when it becomes available.
21-NA-006
This bulletin provides a possible location of a bad connection at the reductant fluid tanks electrical connector.
10-00-89-006I
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
99-00-89-019X
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program.
20-NA-219
This technical bulletin provides repair information to correct a customer concern of a gurgle or sloshing noise heard coming from the front sunroof drain hose areas.
PIE0705A
This engineering information (EI) closure ends the need for further information from the field in regards on the rear washer hose being disconnected.
22-NA-195
This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
PIT5698C
This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
03-06-04-017R
This service bulletin provides information on availability of Diesel Fuel additives.
PI0592G
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
21-NA-077
This informational bulletin provides information for dealers/technicians on Aero Shutter Related Diagnostic Codes.
22-NA-190
This technical bulletin provides repair information to correct a customer concern of Rear Hatch Liftgate Window Glass Inoperative.
05-06-04-022T
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
06-00-89-031H
This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
07-06-01-016H
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
13-08-116-001H
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
15-00-89-004E
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
01-00-89-010Q
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
05-00-89-072F
This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
09-06-04-026W
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
PIP5621C
This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
00-06-01-012L
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
01-06-01-011M
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
03-06-04-017Q
This service bulletin provides information on availability of Diesel Fuel additives.
04-06-04-051G
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
10-06-05-002K
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
00-06-01-026P
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
11-00-89-005U
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
22-NA-022
This Informational bulletin advises the technician of a possible oil leak at the front cover and how to diagnose it to verify if it is coming from the seal or not.
22-NA-179
This technical bulletin provides the procedure to align the right rear door to correct the condition of Right Rear Door Alignment.
05-00-89-029E
This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
22-NA-176
This technical bulletin provides information on a possible bolt and guide pin that may be missing from the control valve which will need to be installed to correct the repair.
22-NA-181
This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
PIP5640A
This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
22-NA-174
This service bulletin provides information on Terms and Conditions/Privacy Statement App (TCPS App) Guide for infotainment systems in a default factory demo mode.
11-00-89-005T
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
20-NA-065
This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
22-NA-159
This informational bulletin provides information for dealers/technicians on visible gap at hem flange where front door skin wraps around and meets door shell.
PIE0709A
This engineering information (EI) closure ends the need for further information from the field in regards to having assist step insert loose, falling off and/or warped.
PIP5792E
This Preliminary information communicates to the dealer technician that if a customer comments that their vehicle equipped with a 6L80, 6L90, 8L90, 10L80, or 10L1000 transmission has a harsh shift, shudder, stall or high transmission fluid temperature concern they should inspect for a twisted transmission cooler line. Technicians are instructed to disconnect the cooler line and untwist it then reconnect the cooler line and inspect the cooler line for being misshaped. Technicians are instructed to replace the cooler line if it is misshaped.
04-00-89-015X
This bulletin provides information on Warranty Administration â Required Operating Procedures - 8 Points (U.S. Only).
PIT5926A
This Preliminary information communicates information on correcting a rattle noise from the underbody exhaust heat shield.
PIT5569B
This Preliminary information communicates direction and examples when diagnosing multiple DTCs, one of which includes U**** Byte 71 DTC.
PIT4261H
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
22-NA-082
This technical bulletin provides repair information to correct a customer concern of Malfunction Indicator Lamp Illuminated with DTC P06DD, P2B60, P26BB, P1098 Set.
PIE0685A
This engineering information (EI) closure ends the need for further information regarding oil leaking from the lower oil pan seal area.
PIT5926
This Preliminary information communicates information on correcting a rattle noise from the underbody exhaust heat shield
22-NA-135
This warranty admin bulletin covers information on Essential Tools that include Consumable Parts.
12-01-37-001F
This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
21-NA-188
This service bulletin provides service information/procedures on continuous improvement Radio Software Version V158 Update to address customer comments on software related issues.
PIC5260F
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
PIT5854A
This Preliminary information communicates information on vehicle speed being limited due to aftermarket lower kit being installed on the vehicle.
PIE0709
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to having assist step insert loose, falling off and/or warped.
22-NA-126
This service bulletin provides repair information to correct a customer concern of Automatic Emergency Braking (AEB) Forward Collision Icon Lamp On with No DTCs Present.
PIT5681C
This Preliminary information communicates the location of the GM Accessory Performance Brake System Rotor Specifications
PIT5448H
This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
PIP5792D
This Preliminary information communicates to the dealer technician that if a customer comments that their vehicle equipped with a 6L80, 6L90, 8L90, 10L80, or 10L1000 transmission has a harsh shift, shudder, stall or high transmission fluid temperature concern they should inspect for a twisted transmission cooler line. Technicians are instructed to disconnect the cooler line and untwist it then reconnect the cooler line and inspect the cooler line for being misshaped. Technicians are instructed to replace the cooler line if it is misshaped.
PIT5913A
This Preliminary information communicates a condtion where SD card removed is being displayed on the radio display intermittently. ThisPI advises that engineering is working on a fix for this issue
22-NA-027
This technical bulletin advises to replace the camshaft cover if found within the Julian date and the cause of a customer concern of possible oil consumption with or without DTC P06DD.
PIE0705
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on the rear washer hose being disconnected.
PIT5099F
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIP5358B
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
PIP5856
This Preliminary information communicates provides information to the technician on the use of R-99 or R-95 Renewable diesel fuel.
22-NA-110
THis informational bulletin advises the tech not to replace the exhaust system if they smell plastic or rubber.
22-NA-111
This informational bulletin provides information on Information On Common Customer Trailer Side Faults.
20-NA-142
This Technical bulletin provides a repair to correct a condition of Shudder/Surging While Driving.
20-NA-218
This service bulletin provides repair information to correct a customer concern of Possible Crank No Start or Extended Crank with DTC P12A6.
N212353390
Service Update Bulletin. Certain vehicles that had the Serial Data Gateway Module (SDGM) replaced in service, may not have been programmed correctly resulting in an incomplete registration of the new module. Dealers are to reprogram the SDGM.
PIE0661C
This engineering information (EI) closure ends the need for further information from the field in regards to a Forward Collision Icon Message Illuminated on Driver Information Center (DIC) and/or No DTCs Set.
14-06-04-004H
This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
PIT5913
This Preliminary information communicates a condtion where SD card removed is being displayed on the radio display intermittently. ThisPI advises that engineering is working on a fix for this issue
12-00-89-003B
This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
PIE0677B
This engineering information (EI) closure ends the need for further information from the field in regards to Power Floor Console Armrest will not lock in place and/or the console lid slides back and forth freely.
PIP5776G
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIP5794B
This Preliminary information communicates diagnostics to the dealer involving a vehicle shudder concern caused by the camshaft actuator system that can be mistaken for a transmission issue.
PIC5260E
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
01-00-89-010P
This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
PI0281I
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
01-00-89-010O
This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
22-NA-044
This service bulletin provides repair information to correct a customer concern of Check Engine MIL Illuminated in DIC Set by Body Control Module with DTC P0607.
PIE0679A
This engineering information (EI) closure ends the need for further information from the field in regards to a Popping Noise Heard On Hard Turns and/or Going Over Speed Bumps, Creaking Noise While Turning Wheel Left and/or Right, Clicking Noise Heard On Slow Sharp Turns.
PIE0676A
This engineering information (EI) closure ends the need for further information from the field in regards to Engine Coolant Reservoir Being Overfilled with Discolored Coolant, Shudder, Shake, Vibration, Harsh Shift, Delayed Shift and/or Slipping Transmission Performance.
PIE0680A
This engineering information (EI) closure ends the need for further information from the field in regards to Driver Headlamp Stays On When Vehicle is Shut Off, Headlamp will Change in Color, Turn Signal Flickers and/or Stays On, GMC Logo Does Not Illuminate.
PIP4670J
This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
PIE0685
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to oil leaking from the lower oil pan seal area.
04-06-04-051F
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
21-NA-243
This technical bulletin provides repair information to correct a customer concern of Short Range Radar (SRR) with DTC U3000 49 Set.
21-NA-082
This technical bulletin provides a procedure to install foam on window motors to prevent them from rubbing on the panels causing a noise.
PIE0661B
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a Forward Collision Icon Message Illuminated on Driver Information Center (DIC) and/or No DTCs Set.
PIT3271M
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
22-NA-047
Information bulletin explains a possible coolant leak coming from the cylinder head bolt areas.
PIE0678B
This Engineering Information (EI) Closure ends the need for further information from the field regarding No Heat from Driver Side Inboard Dash Duct and/or Weak Heat On Driver Side.
PIE0680
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Driver Headlamp Stays On When Vehicle is Shut Off, Headlamp will Change in Color, Turn Signal Flickers and/or Stays On, GMC Logo Does Not Illuminate.
21NA173
This technical bulletin provides a procedure to update the EOCM if found the cause of the customers concern.
PIE0679
Engineering Information.
PIC6450
This Preliminary information communicates a process to correct the concern of Unable to contact OnStar after the 3G EOL on 2015-2022 model year vehicles in the United States.
PIP5653M
This Preliminary information communicates that engineering is investigating a repair for a chirp noise associated with the front axle assembly.
21NA135
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content.
PIT3271L
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
060089029U
Information.
090604026V
Information.
21NA149
This technical bulletin provides repair information to correct a customer concern of Engine Wire Harness Chafing.
22NA022
This Informational bulletin advises the technician of a possible oil leak at the front cover and how to diagnose it to verify if it is coming from the seal or not.
22NA044
Check Engine MIL Illuminated in DIC Set by Body Control Module with DTC P0607
PIE0677A
Engineering Information.
PIP5653L
This Preliminary information communicates that engineering is investigating a repair for a chirp noise associated with the front axle assembly.
080089014G
This service bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
21NA095
This technical bulletin provides a procedure to seal the exhaust at the UFSCR and Tailpipe flange.
22NA015
This informational bulletin provides graphs to help identify possible issues that may cause shaking and shudders and what may be the cause of said issue.
22NA018
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only).
990089019W
This Warranty Administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information.
PIE0672B
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Check Engine Lamp illuminated on Driver Information Center (DIC) and DTC P0607 Set in BCM to determine root cause.
PIE0677
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Power Floor Console Armrest will not lock in place and/or the console lid slides back and forth freely.
070601016G
This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
150089004D
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
18NA067
This service bulletin provides information for cleaning brake dust off of aluminum or chrome wheels.
PI0653F
This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center.
PIE0671B
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a Rattle Type Noise Heard Coming from Rear Liftgate.
21NA275
This service bulletin provides repair information to correct customer concerns of Rear Wheel Lock Up, ABS Event, Loud Bang and a Flashing ?D? on Driver Information Center (DIC) when Lightly or Moderately Accelerating Forcing an 8-7 or 8-6 Downshift.
20NA090
This informational bulletin provides a way for the technician to identify if the ECM has been modified.
22NA016
This technical bulletin provides repair information to correct a customer concern of Transmission Control Module Offline Event.
PIC6384H
This Preliminary information communicates a parts restriction is in place for the Body Control Module on 2020 Cadillac CT4, CT5, Chevrolet Corvette, Suburban, Tahoe and GMC Yukon.
PIE0676
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Engine Coolant Reservoir Being Overfilled with Discolored Coolant, Shudder, Shake, Vibration, Harsh Shift, Delayed Shift and/or Slipping Transmission Performance.
PIT4322M
This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
21NA284
This technical bulletin provides repair information to correct a customer concern of the 60% rear seat will not fold down.
18NA103
This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.
18NA073
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
22NA012
This service bulletin provides information for dealers/technicians on Stone Chip/Membrane Damage, Broken Connector and/or Sensor Retaining Tabs, and/or Paint Damage of Park Assist Sensors.
PIP4902P
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
21NA131
This service bulletin provides repair information to correct a customer concern of Memory Seat Module Does Not Adjust.
PIP4723F
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIP5632F
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
20NA110
This service bulletin provides service information for a DEF pump that is unable to build pressure after replacement.
PIE0658A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards the HVAC is stuck in defrost mode and can not change to vent or any other option.
PIE0659A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards the Service 4WD message displayed on the driver information center (DIC).
22NA009
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
070316004D
This service bulletin provides information for tire pressure monitoring (TPM) system concerns.
16NA380
This service bulletin provides a diagnostic aid procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
030604017P
This service bulletin provides information on availability of Diesel Fuel additives.
16NA222
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
100605002J
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
000090002L
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks.
050604022S
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
1308116001G
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
19NA218
This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
PIP5828A
This Preliminary information communicates to technicians the need to reflash the reductant controller for a P205B intermittently setting.
20NA189
This technical bulletin provides repair information to correct a customer concern of Transmission Control Module Offline Event.
21NA005
This technical bulletin provides a procedure to replace the air bag and air bag harness to correct a condition of Airbag Malfunction Warning and Airbag Malfunction Indicator Illuminated with DTC B0001-1B due to corrosion.
PIP5832
This Preliminary information communicates to the dealer an issue where a vehicle may be exhibiting an engine noise condiion. The dealer is instructed on how to isolate the noise to a specific area of the engine for further diagnosis.
20NA166
This informational bulletin advises the technician of possible coolant entering the areas of the engine, either through failed parts or defects in the castings, that may be the cause of the concerns related to the MIL or the engine running rough.
20NA228
This technical bulletin provides a procedure to replace the fuel filter and perform a filter life procedure if found the reason for a failed fuel filter life reset during ECM transfer of data.
PIT5874
This Preliminary information communicates an issue with the GDS2 scan tool not being able to communication with the front view camera module and provides a work around until GDS2 is fixed.
PIT5828A
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
21NA281
This service bulletin provides diagnostic information for technicians in cases of an ETRS system fault or a no start condition - If the vehicle needs to be moved, it is recommended to use wheel dollies, tire skates or the NEW Manual Park Release tool DT-52910.
PIT5868
This Preliminary information communicates an issues will low or poor heater performance on the drivers side. Dealers are to inspect the HVAC temperature door linkage and if ok replace the heater core.
PIT5869
This Preliminary information communicates an issues with an SES MIL, A/C blowing warm air and DTC's B1AA3 U3018 U3505 due to Fuse F4DR open. Dealers are to inspect the wiring in the front floor console.
PIP5828
This Preliminary information communicates to technicians a P205B intermittently setting is under investigation by engineering and to clear the code and release the vehicle.
21NA267
This bulletin advises the technician of a possible location that a leak may occur from the SCT pipe.
21NA271
TGhis bulletin advises the technician of a possible coolant hose that might be kinked causing the customers concern.
21NA272
This service bulletin provides information on Engine Oil Consumption Guidelines.
21NA237
THis technical bulletin provides a procedure to perform a cooling system flush to remove possible debris from the cooling system pipes.
21NA091
This service bulletin provides information for customers/dealers/technicians on Normal Rearview Camera Display Operation - Flashing Diamond - Spot - or UFO like image on Rear View Camera Display.
PIE0662A
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Reductant Tank Temperature Sensor Performance and/or Service Emissions System Message on Driver Information Center (DIC), DTC P205B Set.
20NA178
This service bulletin provides repair information to correct a customer concern of Service Driver Assist and/or Take Steering Messages on Start-up, Advanced Driver Assist Systems (ADAS) Features Not Available with DTCs U1614, U1615, U1616 Set.
PIE0671
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a Rattle Type Noise Heard Coming from Rear Liftgate.
21NA197
This technical bulletin provides repair information to correct a customer concern of Power to the 110V/120 Outlet is Interrupted During an Auto Stop/Start Event.
PIT5867
This Preliminary information communicates a diagnostic tip on how to resolve a issue with DTC: U300 SYM 49
030310007K
This service bulletin provides information for dealers/technicians on Tire/Wheel Characteristics (Vibration, Balance, Shake, Flat Spotting) of GM Original Equipment Tires.
19NA104
This service bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
030091001H
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
21NA244
This service bulletin provides a repair procedure to correct a customer concern of a No Fob detected message on Driver Information Center (DIC) and/or No Crank / No Start condition.
21NA243
This technical bulletin provides repair information to correct a customer concern of Short Range Radar (SRR) with DTC U3000 49 Set.
PIT5854
This Preliminary information communicates information on vehicle speed being limited due to aftermarket lower kit being installed on the vehicle.
PIT5841A
This Preliminary information communicates information on a No Crank / No Start concern caused by a No Fob Detected message caused by an internal fault of the BCM. Dealer is to replace the BCM to correct this concern.
PIC6444
This Preliminary information communicates a possible SIM issue with vehicles in the middle east.
PIT3099U
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
20NA114
This informational bulletin provides information for dealers/technicians on the false setting of DTC U0212.
20NA132
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
PIC5650J
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIT5698B
This Preliminary information communicates additional information on how a LIN bus operates and diagnostic tips when working on a LIN bus.
PIP5776F
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIP5653K
This PI communicates that engineering is investigating a correction to a noise originating in the front of the vehicle.
PIC6384G
This Preliminary information communicates a parts restriction is in place for the Body Control Module on 2020 Cadillac CT4, CT5, Chevrolet Corvette, Suburban, Tahoe and GMC Yukon.
21NA119
This technical bulletin provides repair information to correct a customer concern of Tire Pressure Monitor System Sensors Display Dashes with Trailer Connected.
21NA152
This service bulletin provides information for dealers/technicians on glass ultraviolet (UV) Ray protection and tint percentage.
PIE0624A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Liftgate Ajar Lamp illuminated on Driver Information Center (DIC) with the Liftgate being closed.
N212333800
Emission Recall. General Motors has decided to conduct a voluntary emissions recall involving certain vehicles equipped with a performance air intake system (LPO RVK or 5W7). The Engine Control Module (ECM) may not have been programmed with the calibrations appropriate for the performance air intake system installed on the engine in these vehicles. Dealers will reprogram the ECM.
010842001N
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
PIP5776E
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIT4261G
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
990420002L
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
PIP5632E
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIE0625A
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on a turn signal not canceling and/or mis-canceling.
21NA132
This informational bulletin provides Changes to the Automatic Stop/Start feature for Certain 2021 Escalade models, Silverado 1500, Suburban, Tahoe, Sierra 1500, Yukon models Equipped with RPO NSS.
21NA129
This technical bulletin provides repair information to correct a customer concern of rear seat (60 Percent) and/or (40 Percent) chucking movement, and noise is present at rear latch to striker.
080730035E
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
110089002E
This service bulletin provides information on GM Accessories ? Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.
PIP5792B
This Preliminary information communicates to the dealer technician that if a customer comments that their vehicle equipped with a 6L80, 6L90, 8L90, 10L80, or 10L1000 transmission has a harsh shift, shudder, stall or high transmission fluid temperature concern they should inspect for a twisted transmission cooler line. Technicians are instructed to disconnect the cooler line and untwist it then reconnect the cooler line and inspect the cooler line for being misshaped. Technicians are instructed to replace the cooler line if it is misshaped.
21NA126
This technical bulletin provides repair information to correct a customer concern of Rear Access Open Message Illuminated in DIC when Liftgate is Closed.
PIE0643
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Malfunction Indicator Lamp (MIL) illuminated on Driver Information Center (DIC).
PIP5752M
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
070089037Q
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
21NA124
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
PIC6384F
This Preliminary information communicates a parts restriction is in place for the Body Control Module on 2020 Cadillac CT4, CT5, Chevrolet Corvette, Suburban, Tahoe and GMC Yukon.
PIT5681B
This Preliminary information communicates the location of the GM Accessory Performance Brake System Rotor Specifications
N212327470
Service Update. Certain vehicles, equipped with an Infotainment System, may have a condition during cold temperature conditions where the Infotainment screen is blacked out. Dealers will reprogram the radio.
18NA306
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
PIP5792A
This Preliminary information communicates to the dealer technician that if a customer comments that their vehicle equipped with a 6L80, 6L90, 8L90, 10L80, or 10L1000 transmission has a harsh shift, shudder or stall concern they should inspect for a twisted transmission cooler line. Technicians are instructed to disconnect the cooler line and untwist it then reconnect the cooler line and inspect the cooler line for being misshaped. Technicians are instructed to replace the cooler line if it is misshaped.
PIE0639
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to one or more camera views showing intermittent behavior and/or totally inoperable.
20NA219
This technical bulletin provides repair information to correct a customer concern of a gurgle or sloshing noise heard coming from the front sunroof drain hose areas.
070089037P
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
100089006H
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
PIE0637
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to one or more of the following condition Stalls, Crank with no star, Check Engine Lamp illuminated on the Driver Information Center (DIC).
PIE0638
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to having a No Start, Forward Collision Alert, Adaptive Cruise Control and/or Lane Keep Assist Inoperable condition.
PIP5776D
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIT4322L
This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
18NA279
This service bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
PIE0623
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Malfunction Indicator Lamp illuminated on the Driver Information Center (DIC).
PIT5841
This Preliminary information communicates information on a No Crank / No Start concern caused by a No Fob Detected message caused by an internal fault of the BCM. Dealer is to replace the BCM to correct this concern.
21NA044
This technical bulletin provides repair information to correct a customer concern of SUV Vehicle Software Configuration Management Update (VeSCoM).
PIP5738C
This Preliminary information communicates to the dealer technician that the 10L80 transmission part restriction has ended. Technician may now order these transmissions through the regular GM CCA parts process or PQC process for required dealers (Canada).
PIP5805
This Preliminary information communicates that the performance air cleaner kit (cold air intake system) can only be installed on vehicles that had the option ordered for the vehicle when it was produced. This performance air filter kit can not be installed on vehicles that were not ordered / produced with this option. This document also reinforces, the vehicles that did have the kit ordered and installed, a calibration is needed to make the kit work properly or DTC's may set.
20NA218
This service bulletin provides repair information to correct a customer concern of Possible Crank No Start or Extended Crank with DTC P12A6.
PIE0595A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to paint concerns with the front and/or rear fascias.
20NA159
This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
PIE0634
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to concerns with the front center floor power console function and/or appearance issues.
PIE0632
This engineering information (EI) requests dealership personnel involve GM Engineering in the event an Owner is in Receipt of a PAI (Proactive Alert Identifier) "SAC003" and/or the Dealer is informed of excessive Parasitic Drains on an in-inventory vehicle.
19NA044
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
21NA109
This service bulletin provides diagnostic information for a customer concern of engine vibration.
PIC6384E
This Preliminary information communicates a parts restriction is in place for the Body Control Module on 2020 Cadillac CT4, CT5, Chevrolet Corvette, Suburban, Tahoe and GMC Yukon.
16NA338
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
21NA103
This service bulletin provides information regarding Witness Marks from Panel Adjustments Made During Manufacturing and that it is considered a normal condition.
PIP5776C
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
000601026N
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
N202316750
Service Update - Certain 2021 model year Chevrolet Suburban, Tahoe, and GMC Yukon, Yukon XL vehicles may have been built with 3rd row head restraints that will not stay up after being folded forward, due to an internal spring tab breaking. Dealers will replace the structural core of the 3rd row headrests only.
PIP5752L
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
21NA068
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with RPO ATH and AVJ (U.S. Only).
20NA233
This technical bulletin provides repair information to correct a customer concern of Long Range Radar setting DTC U3000 49.
050308002I
This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
PIP5654A
This Preliminary information communicates to the dealer technician that the valve body Part Unique Number (PUN) may contain the letter O or the number 0.
PIP5801A
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506,P3189, P318A, P318B, P318C, P318D, P318E, P318F, P3190 Possible broken valve spring.
20NA038
This informational bulletin explains the difference in AFM and DFM engines and what is and is not activated during this occurrence.
PIP5801
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506,P3189, P318A, P318B, P318C, P318D, P318E, P318F, P3190 Possible broken valve spring.
18NA146
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
PIE0624
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Liftgate Ajar Lamp illuminated on Driver Information Center (DIC) with the Liftgate being closed.
PIP5794A
This Preliminary information communicates diagnostics to the dealer involving a vehicle shudder concern caused by the camshaft actuator system that can be mistaken for a transmission issue.
020089002T
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
070089036J
This service bulletin provides information on Enhancing Field Product Reports with Digital Pictures.
21NA057
This technical bulletin provides a procedure to replace the video player and reprogram to correct the condition of Non-Responsive Touch on Rear Seat Infotainment Left Screen .
21NA081
This technical bulletin provides a procedure to locate a possible short in the engine wiring harness.
21NA082
This technical bulletin provides a procedure to install foam on window motors to prevent them from rubbing on the panels causing a noise.
PIT5791A
This Preliminary information communicates a condition where the radio may display a :connection not availale, please call OnStar agent". This bulletin advises that Engineering is working on a software solution that will prevent the message from displaying when listening to non-SXM sources, but still allow the message to display when a loss of connectivity exists and the user is attempting to play Sirius XM.
18NA099
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
PIE0625
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards on a turn signal not canceling and/or mis-canceling.
PIT5828
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
PIP5794
This Preliminary information communicates diagnostics to the dealer involving a vehicle shudder concern caused by the camshaft actuator system that can be mistaken for a transmission issue.
21NA073
This technical bulletin provides a procedure to replace the steering gear if found the cause of the customers concern.
21NA061
This service bulletin provides information for dealers on Using EL-52545 When Diagnosing PEPs Transmitter Key Fobs (North America ONLY).
PIP5787A
This Preliminary information communicates Some customers may comment that the SES lamp is illuminated or was Illuminated and turned off. During inspection Technician may notice DTC, P0106 (Manifold Absolute Pressure Sensor Performance), P0108 (Manifold Absolute Pressure Sensor Circuit High) and/or P00C7 (Intake Air Pressure Measurement System Sensor and Multiple Sensors Correlation) codes active or stored in history. This condition may be caused by a faulty Manifold Absolute Pressure (MAP) sensor.
PIP5792
This Preliminary information communicates to the dealer technician that if a customer comments that their vehicle equipped with a 6L80, 6L90, 8L90, 10L80, or 10L1000 transmission has a harsh shift, shudder or stall concern they should inspect for a twisted transmission cooler line. Technicians are instructed to disconnect the cooler line and untwist it then reconnect the cooler line and inspect the cooler line for being misshaped. Technicians are instructed to replace the cooler line if it is misshaped.
PIP5738B
This Preliminary information communicates to the dealer technician that the 10L80 transmission has been place on a part restriction. Dealers are to contact the Product Quality Center before replacing the transmission assembly.
110089005Q
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIP5787
This Preliminary information communicates Some customers may comment that the SES lamp is illuminated or was Illuminated and turned off. During inspection Technician may notice DTC, P0106 (Manifold Absolute Pressure Sensor Performance), P0108 (Manifold Absolute Pressure Sensor Circuit High) and/or P00C7 (Intake Air Pressure Measurement System Sensor and Multiple Sensors Correlation) codes active or stored in history. This condition may be caused by a faulty Manifold Absolute Pressure (MAP) sensor.
PIE0618
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards
1008110001I
This informational bulletin provides information on proper use of floor mats.
20NA138
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
19NA255
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
21NA060
This service bulletin describes the TLC/SPS2 Module Programming Requirements for Vehicles Using GM?s New Vehicle Intelligence Platform (VIP) Module Architecture.
21NA043
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
21NA050
This technical bulletin provides repair information to correct a customer concern of paint chipping or peeling on front fascia, at interface of front fender and fascia near headlamp.
16NA109
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
20NA123
This service bulletin provides repair information to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated with DTCs U1961, U1983 setting.
21NA002
This informational bulletin provides a test procedure, for a possible faulty DEF Heater.
PIP5776B
This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIE0592B
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards one or more camera views showing, intermittent behavior and/or totally inoperative.
PIC6384D
This Preliminary information communicates a parts restriction is in place for the Body Control Module on 2020 Cadillac CT4, CT5, Chevrolet Corvette, Suburban, Tahoe and GMC Yukon.
150089004C
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
21NA026
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
N202317390 01
Customer Satisfaction Program (Revised Service Procedure). Certain vehicles may have a condition in which the brake system control module (BSCM) may set and latch an internal fault in the module?s on-board diagnostics (OBD) buffer. When the fault is present, no malfunction indicator lamp (MIL) is illuminated and there is no driver information center (DIC) message. If an over the air (OTA) software update is pushed to an OBD module and the customer accepts it through the Infotainment system, the update will fail because the presence of the active fault will block the OTA update. The customer may notice that the OTA update has failed with an error message on the DIC. This fault is not visible through dealer tools. Dealers are to reprogram the BSCM.
20NA237
This service bulletin provides V152 radio software update information to correct customer concerns of various software issues.
20NA238
This service bulletin provides V153 radio software update information to correct customer concerns of various software issues.
21NA006
This bulletin provides a possible location of a bad connection at the reductant fluid tanks electrical connector.
N202321230
Service Update. On certain vehicles the clamp may not be properly aligned and positioned on the hose, or the hose is rolled over on the pump port. The improper assembly can quickly develop into a significant leak early in the truck?s life. As the coolant level drops, a Low Coolant Warning or potential for engine overheat with DIC message is possible. Dealers are to inspect for both the vertical and horizontal hose at the auxiliary coolant pump, and repair as needed.
20NA208
This technical bulletin provides repair information to correct a customer concern of Assist Step Running Boards Inoperable and Not Functioning with Door Operation.
N202319250
Service Update - Certain 2021 vehicles have a condition where, if an over the air (OTA) update was sent to an affected vehicle, the update would fail. Customers will see the update is available, but after accepting and attempting to install, they will receive an update failed message. Dealers will replace the radio.
PIE0597A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards the power liftgate inoperative.
PIE0599B
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
N202315510
Customer Satisfaction Program - vehicles may have a condition in which the trailering label has zeroedout information on the label. Information such as Gross Combined Weight Rating (GCWR), Conventional Trailering Weight Rating(TWR) and Max Tongue Weight may show a zero instead of the proper amounts. Install the updated label. Because this label can easily be installed by the customer, and to reduce their inconvenience,labels and installation instructions will be mailed to customers of record.
PIE0601A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Service Engine Soon Lamp being illuminated.
PIT5799A
This Preliminary information communicates a cocnern where a flashing spot can intermittently show up on the radio display while in reverse. The PI advises that engineering is investigating the concern.
20NA235
This service bulletin provides information to aid a dealer/customer concern of Radio Unwanted Phantom Touch or Non-Responsive to Touch After Cleaning/Disinfecting Radio Display.
010601011L
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
N202319660 01
Service Update. Certain vehicles may present a broken engine valve spring. This may cause the engine to run rough, an engine knocking or ticking noise, a check engine light illumination, or a possible vehicle stall. Dealers are to perform the inspection procedure contained within this bulletin.
N202310850 02
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
17NA166
This technical bulletin provides a procedure to measure vibration and install engine mounts to correct a Rough Idle in Drive concern.
090604026S
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
PIC6423
This Preliminary Information communication requests information from the technician about vehicles that may have Bluetooth or phone projection issues. Dealer should request as much information from the customer on the concern as possible and fill in the questionaire.
N202310850 01
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
N202310850 Reope
Customer Satisfaction Program (VINS re-opened, software updated). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
040089015V
This bulletin provides information on Warranty Administration ? Required Operating Procedures - 8 Points (U.S. Only).
16NA019
This informational bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares.
N202310850
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
PIE0599A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
18NA263
This warranty administration bulletin provide policy information for variable diagnostic time allowances on select labor operations (U.S. Only).
PIE0601
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Service Engine Soon Lamp being illuminated.
PIT5761
This Preliminary information communicates an issue with a gurgle noise from the sunroof drains and advises customers to turn on the HVAC blower to clear the drain.
N202317390
Customer Satisfaction Program (Programming Suspended/Resumed) - Certain vehicles may have a condition in which the brake system control module (BSCM) may set and latch an internal fault in the module?s on-board diagnostics (OBD) buffer. When the fault is present, no malfunction indicator lamp (MIL) is illuminated and there is no driver information center (DIC) message. If an over the air (OTA) software update is pushed to an OBD module and the customer accepts it through the Infotainment system, the update will fail because the presence of the active fault will block the OTA update. The customer may notice that the OTA update has failed with an error message on the DIC. This fault is not visible through dealer tools. Dealers are to reprogram the BSCM.
20NA078
This technical bulletin provides a procedure to replace the 4 5 6 clutch housing if the bushing was found worn and the cause of the customers concern.
N202319660
Service Update. Certain vehicles may present a broken engine valve spring. This may cause the engine to run rough, an engine knocking or ticking noise, a check engine light illumination, or a possible vehicle stall. Dealers are to perform the inspection procedure contained within this bulletin.
PIP5752G
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
060089031F
This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
PIT5782A
This Preliminary information communicates and issue with programming a replacement side object detection module and engineering is working on the issue.
PIT5800
This Preliminary information communicates and issues with Fuse F49 blowing causing a SES MIL and a Service Theft Deterrent System message displayed in the DIC. It instructions dealership to inspect the 12 volt power accessory port for shorting out.
PIT5784A
This Preliminary information communicates and issue with customers misunderstanding weather they need to bluetooth pair the factory provided headphones.
PIE0599
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
PIT5797
This Preliminary information communicates and issue with the hands free liftgate feature being inoperative after the vehicle has been turned off for an extended time. Dealers are to reprogram the BCM to correct this concern.
030604017O
This Informational Bulletin provides information on availability of Diesel Fuel additives.
PIT5795
This Preliminary information communicates and issue with a either a Service Leveling or Service Headlight message displayed on the DIC. When checking for DTC's a U0132 for Lost Communication with K5 Automatic Level Control Module (ALCM) may be set in several modules. When trying to communicate with the Automatic Level Control Module there will be no communication. Engineering is working on a fix.
PIT5796
This Preliminary information communicates and issue where the drivers memory seat will not move to its full travel and dealers are to perform a SPS setup procedure to the K40D Drivers Seat Adjuster Memory Module.
000310002L
This service bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
PIT3271K
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
990851001E
Thins informational bulletin provides information on Paint-less Dent Repair Process.
PI0754D
This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
PIE0592A
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards one or more camera views showing, intermittent behavior and/or totally inoperative.
PIE0597
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards the power liftgate inoperative.
PIP5759A
This Preliminary information communicates 6.2L engine restriction, Contact TAC
PIT5766A
This Preliminary information communicates there is a Part Restriction for the Automatic Leveling Control Module and to contact the PQC to order the part.
PIT5791
This Preliminary information communicates a condition where the radio may display a :connection not availale, please call OnStar agent". This bulletin advises that Engineering is working on a software solution that will prevent the message from displaying when listening to non-SXM sources, but still allow the message to display when a loss of connectivity exists and the user is attempting to play Sirius XM.
PIE0595
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to paint concerns with the front and/or rear fascias.
PIP5752F
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
20NA196
This service bulletin provides information and a service procedure for dealers/technicians on OnStar Over the Air Update for TTY / TDD Operation and Continuous Improvement Changes.
1308116001F
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
PIP5752E
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
N202317390 Repro
Customer Satisfaction Program. Reprogramming resumed message.
PIP5752D
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
PIP5759
This Preliminary information communicates 6.2L engine restriction, Contact TAC
050604022R
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
PIE0592
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards one or more camera views showing, intermittent behavior and/or totally inoperative.
20NA160
This service bulletin provides information for dealers/technicians on Normal Characteristic - Wireless Phone Projection Audio Cuts Out Every 10 Seconds on New/Unsold Vehicles.
PIP5752C
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
PIP5752B
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
060089026Q
This warranty administration bulletin provides information on Warranty Administration - Customer Concern Not Duplicated (CCND) Labor Operation Numbers.
PIP5738A
This Preliminary information communicates to the dealer technician that the 10L80 transmission has been place on a part restriction. Dealers are to contact the Product Quality Center before replacing the transmission assembly.
20NA204
This technical bulletin provides a procedure to program the ECM if found the cause of the customers concern.
PIP5731
This Preliminary information communicates During inspection of the vehicle for an unrelated concern the technician may notice that one or more of the following Cylinder Deactivation Performance DTC(s) P3498, P3499, P349A, P349B, P349C, P349D, P349E, or P349F may be set in history. and not requesting MIL. If any of these DTCs are requesting the MIL, please follow appropriate service information for diagnosis & repair. This condition may be caused by the ECM hardware disabling the cylinder deactivation outputs for an ignition cycle due to low voltage transient during crank & inadvertently causing one of the DTCs to set during an ignition cycle.
20NA201
This technical bulletin provides repair information to correct a customer concern of Liftgate Unwanted Opening Due to Hands-Free Calibration Sensitivity.
PIP5733E
This Preliminary information communicates Possible Crank no start or extended crank with DTC p12A6 set current or history. Under Investigation
110089005P
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIP5733D
This Preliminary information communicates Possible Crank no start or extended crank with DTC p12A6 set current or history. Under Investigation
PIP5752A
This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
N202311260
Service Update Bulletin - Certain 2021 model year Chevrolet Suburban, Tahoe, and GMC Yukon vehicles may have a kink in the rear camera washer hose. Dealers will inspect for functionality of the full display mirror (FDM) camera wash, and, if necessary, add a protective sleeve and trim the hose.
20NA157
This bulletin provides information on the Transport Mode On Message Being Displayed in the Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message ON and OFF.
20NA190
This technical bulletin provides repair information to correct a customer concern of Service Power Steering Message Displayed in DIC, DTC?U3000?44 Set.
N202310870
Service Update Bulletin. Certain vehicles may have a standoff flange on the front license plate mounting bracket that is too long and may interfere with the front fascia when being installed. The license plate bracket can be installed but bows away from the front fascia and in some cases, the front license plate bracket cannot be installed. Dealers are to install the front license plate bracket.
16NA361
This informational bulletin explains possible normal condition of a flare from 1st to 2nd, even if the trans had been repaired for the flare and its still noticed.
N202310520
Service Update - certain vehicles may have a condition where the engine oil cooler line is not fully seated into the quick connect at the radiator. Dealers are to inspect the engine oil cooler lines at the quick connector on the radiator to confirm they are fully seated.
PIT5758A
This Preliminary information communicates an issues with front park assist false alerts caused by a software issues. Engineering has released updated software.
PIP5733A
This Preliminary information communicates Possible Crank no start or extended crank with DTC p12A6 set current or history. Under Investigation
PIT5759A
This Preliminary information communicates an issue with the SIR MIL turning on and DTC B14DC setting. Engineering is root causing the concern.
PIT5759
This Preliminary information communicates an issue with the SIR MIL turning on and DTC B14DC setting. Engineering is root causing the concern.
PIT5757
This Preliminary information communicates and issue with the front License Plate Bracket not fitting to the fascia correctly and advises dealership how to correct the fit issue.
PIT5758
This Preliminary information communicates an issues with front park assist false alerts caused by a software issues. Engineering is working on new software to correct this concern.
20NA137
This informational bulletin provides information for dealers/technicians on the 2021 Chevrolet Suburban, Tahoe, GMC Yukon and Yukon XL New Model Features.
PIP5738
This Preliminary information communicates to the dealer technician that the 10L80 transmission has been place on a part restriction. Dealers are to contact the Product Quality Center before replacing the transmission assembly.
PIP5726
This Preliminary Information communication advises the technician that the Product Quality Center has a part restriction for the Engine Control Module. The dealer technician is advised to call the GM Product Quality Center for further assistance
090089002R
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
20NA083
This technical bulletin provides a procedure to check the oil level for correct reading and oil pressure switch is in working order.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.