Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IB13-R-001G
This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The Exchange Program must be used when any Alpine radio or other component covered by this bulletin is repaired under warranty and may also be used for radio and component repairs not covered under warranty. Contact Alpine directly for pricing and payment methods applicable to radio and component repairs not covered under warranty.
WB13-X-001B
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form
WB13-X-001A
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.
IB09-X-002B
The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various Isuzu Workshop Manuals and bulletins. If a Threebond product is unavailable, we recommend that you utilize the chart below to find equivalent of similar products (when available) from Loctite and Permatex.
IB09-X-004C
The Isuzu Commercial Truck of America (ICTA) Service Technical Assistance Center (TAC) provides diagnostic support to Isuzu dealer technicians repairing Isuzu vehicles in and out of vehicle warranty. A TAC case number will be issued solely for information tracking purposes and future contact reference.
05-06-04-035D
This informational bulletin provides the technician with information on what E85 fuel may due to a non E85 vehicle.
0301S002
THROTTLE BODY MOUNTING BOLT TORQUE SPECIFICATIONS. *TT
0305S001
TRANSMISSION INDICATOR LIGHT MAY BE ON AND DIAGNOSTIC TROUBLE CODE P1870 IS SET IN THE POWERTRAIN CONTROL MODULE (PCM). *TT
0205S003
TRANSMISSION INDICATOR LIGHT MAY BE ON AND DIAGNOSTIC TROUBLE CODE P1870 IS SET IN THE PCM (POWERTRAIN CONTROL MODULE). *TT
0211S003
REAR CUP HOLDER DOES NOT STAY IN THE UP POSITION. *TT
0204S003
REPLACEMENT ODOMETER PROGRAMING. *JG
0201S003
V-6 FAN CLUTCH REPLACEMENT PROCEDURES. *TT
0201S001
MOUNTING POSITION OF SPEEDOMETER DRIVEN GEAR BUSHING WORK SHOP MANUAL REVISION. *JG
IB0004S005
THIS BULLETIN PROVIDES INFORMATION ON THE P1640 AND P1650 OUTPUT DRIVE CODES WHICH REFER TO OUTPUT DRIVER CIRCUIT CONDITIONS RELATED TO THE PCM. *TT
SB0001S005
EXPERIENCING INTERMITTENT ROUGH IDLE AND / OR THE MALFUNCTION INDICATOR LAMP IS ON WITH DIAGNOSTIC TROUBLE CODES P0171, P0174, OR P1171. *TT
SB0011S002
SOME OWNERS MAY COMMENT OF STATIC NOISE IN THE DOOR RADIO SPEAKER WHEN ADJUSTING THE OUTSIDE REAR VIEW MIRRORS. *TT
SB0002S002
SERVICE INFORMATION REGARDING ALL AFFECTED VEHICLES WITH THE P1441 EVAPORATIVE EMISSION CODE THAT HAS BEEN DIAGNOSED WITH NO FAULT FOUND FROM THE APPROPRIATE FLOW CHART IN THE DRIVEABILITY AND EMISSIONS MANUAL. *TT
IB00S005
THIS INFORMATION BULLETIN OUTLINES THE PROPER STEPS TO INDEX THE CAMSHAFTS WITH THE CRANKSHAFT FOR VEHICLES EQUIPPED WITH DIRECT ATTACK DOHC 3.2L / 3.5L V6 ENGINE. IN THE EVENT THAT CAMSHAFT TIMING HAS BEEN DISRUPTED, DUE TO TIMING BELT BREAKAGE OR CAMSHAFTS / CRANKSHAFT BEING ROTATED WITHOUT A TIMING BELT, THIS IS IMPORTANT PRIOR TO TIMING BELT INSTALLATION. *TT
IB00S007
ON SUV VEHICLES WITH AUTOMATIC TRANSMISSIONS, SOME REMOTE STARTER INSTALLATIONS MAY CAUSE THE MALFUNCTION INDICATOR LIGHT TO SET AND STORE P0705. AMERICAN ISUZU MOTORS DOES NOT SELL REMOTE STARTER KITS AND DOES NOT RECOMMEND ANY PARTICULAR INSTALLATION. *TT
SB9901S002
MAINTENANCE SCHEDULE INFORMATION: TIMING BELT REPLACEMENT INTERVAL AND DOHC V6 VALVE ADJUSTMENT SCHEDULE. *TT
SB9914S007
INFORMATION REGARDING THE AVAILABILITY OF THE CHILD SEAT TETHER ANCHOR KIT. *TT
9801L004
WORKSHOP MANUAL REVISIONS ON COOLING FAN ASSEMBLY TORQUE SPECIFICATIONS. *YC
9813L004
SERVICE INFORMATION ON REMOTE KEYLESS ENTRY / SECURITY SYSTEM REPROGRAMMING. *YC
SB9805L003
ON SOME VEHICLES UP TO VIN W7907635, THE FRONT AND REAR OUTPUT FLANGE LOCK NUTS OF THE TORQUE-ON-DEMAND (TOD) 4-WD SYSTEM TRANSFER CASE MIGHT BE WITHOUT STAKING. IN SUCH CASES, THERE IS A POSSIBILITY THAT THE LOCK NUT MAY LOOSEN, RESULTING IN SEPARATION OF THE PROPELLER SHAFT RENDERING THE VEHICLE INOPERATIVE. *TT
9801L002
WORKSHOP MANUAL REVISIONS ON FAN BELT INFORMATION. *YC
9807L001
A NEW TYPE OF LSD LUBRICANT WAS INTRODUED WHICH CONTAINS FRICTION MDIFIERS, NECESSARY FOR PROPER LSD FUNCTION. *YC
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.