Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
CS2311_TSB_R4
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION: CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2312_TSB_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
TSB_CS2312_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2311_OWNR_PC201
Other
CUSTOMER SATISFACTION CAMPAIGN: POSTCARD OWNER RENOTIFICATION (CS2311) - This document is the owner renotification advising that Kia is conducting Customer Satisfaction Campaign. Kia has developed a new zinc-reinforced ignition cylinder protector hardware upgrade and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Prior notifications stated that this modification had to be performed by July 1, 2025, but the subject vehicles are now eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 19, 2025 through December 31, 2025)
TSB_CS2312
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2312_OWNR
Other
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)
PS797
Other
PITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a “Warning Lamp’ to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)
TSB_TRA046_R5
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.
CS2311_TSB_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 15, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2308_TSB_R6
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked with the use of the key fob.
TSB_TRA046_R4
Service Bulletin/Repair Instructions
This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced.
CS2308_TSB_R5
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGICUPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2311_TSB_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 15, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2308_TSB_R4
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT SOFTWARE LOGIC UPGRADE & DECALL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2311B_OWNRVQ
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia now has an additional vehicle modification available for installation to help deter or thwart attempted thefts. This modification consists of a theft deterrent ignition cylinder protector and will be available to you free of charge for eighteen (18) months from the date of this letter.
CS2311_TSB_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 15, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2311_TSB
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 13, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2308_TSB_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2308A_OWNR2
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN: OWNER RE-NOTIFICATION - This document is the owner re-notification advising that Kia has developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of the original letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to the vehicle to discourage a break-in.
CS2308L_OWNR
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia is now making steering wheel lock devices available directly to certain Kia vehicle owners. These devices can help deter a theft attempt. We are making this device available to customers free of charge and will ship it directly to customers who place orders within eighteen (18) months from the date of this letter.
CS2308_TSB_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2308A_OWNRVQ
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia has developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of this letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to your vehicle to discourage a break-in.
CS2308_TSB_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2308_TSB
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation. Follow the procedure outlined in this publication to apply the improved logic to the "IBU-BCM" system using the KDS ECU Upgrade function as described in this bulletin. For confirmation that the latest reflash has been applied to a vehicle you are working on, verify the ROM ID using the table on page 3 of this bulletin.
TSB_TRA046_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.
TSB_BOD055_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.
WTY018_TSB
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: POWER SLIDING DOOR (PSD) OPERATION INSPECTION AND REPAIR - This bulletin provides information regarding the replacement of certain Power Sliding Door (PSD) system parts associated with the Warranty Extension Program (WTY018) on some 2011-2014MY Sedona (VQ) vehicles produced from April 1, 2010 through April 4, 2014. The power sliding door may not completely latch upon closing in auto-mode. If this occurs, the open-door indicators such as activation of the chimes and illumination of the dashboard telltales and/or dome lights will occur. Inspect and diagnose the power sliding door function to identify the part requiring replacement.
WTY018_OWNR
Service Bulletin/Repair Instructions
WARRANTY EXTENSION: OWNER NOTIFICATION - Kia Motors America, Inc. takes pride in providing you with high quality and dependable vehicles. In order to maintain these standards, Kia is extending the New Vehicle Limited Warranty coverage, to all owners of 2011-2014 MY Sedona vehicles equipped with Power Sliding Doors, for Power Sliding Door difficulty latching issues from 5-years/ 60,000-miles to 15-years/unlimited-miles starting from the date the vehicle was first put into service. The power sliding door may not completely latch upon closing.
WTY018_REIMB
Service Bulletin/Repair Instructions
WARRANTY EXTENSION: REIMBURSEMENT FORM - This document is a Reimbursement Request form that was mailed with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.
WTY018_DP
Service Bulletin/Repair Instructions
WARRANTY EXTENSION: DEALER PRINCIPAL MEMO - Kia Motors America, Inc. is extending the warranty coverage, to all owners of 2011-2014 MY Sedona vehicles equipped with Power Sliding Doors, for Power Sliding Door difficulty latching issues from 5-years/60,000-miles to 15-years/unlimited-miles starting from the date the vehicle was first put into service. The power sliding door may not completely latch upon closing. If, at any time during the extended warranty coverage, the vehicleâs power sliding door does not completely latch upon closing, Kia dealers are to diagnose the cause at no cost to the customer. If the diagnosis indicates the condition is caused by the Remote Controller or Door Latches, which are the main components that can cause this condition, dealers are to replace the part at no cost to the customer.
WTY018_DPSM
Service Bulletin/Repair Instructions
WARRANTY EXTENSION: DEALER PARTS AND SERVICE MANAGER MEMO - Kia Motors America, Inc. is extending the warranty coverage, to all owners of 2011-2014 MY Sedona vehicles equipped with Power Sliding Doors, for Power Sliding Door difficulty latching issues from 5-years/60,000-miles to 15-years/unlimited-miles starting from the date the vehicle was first put into service. The power sliding door may not completely latch upon closing. If, at any time during the extended warranty coverage, the vehicleâs power sliding door does not completely latch upon closing, Kia dealers are to diagnose the cause at no cost to the customer. If the diagnosis indicates the condition is caused by the Remote Controller or Door Latches, which are the main components that can cause this condition, dealers are to replace the part at no cost to the customer.
WTY018_QA
Service Bulletin/Repair Instructions
WARRANTY EXTENSION: QUESTION AND ANSWER - This document is the Question and Answer Guide containing the most frequently asked questions regarding the warranty extension (WTY018).
PS675
Service Bulletin/Repair Instructions
PITSTOP - BRAKE CALIPER LEAK INSPECTION - This PITSTOP provides information related to a brake caliper fluid/oil substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.
TSB_TRA046_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: - TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles on page 2. Refer to the shop manual on KGIS for the specific Kia model for the correct transmission fluid check/fill procedures.
TSB_ELE148
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: HALOGEN HEAD LAMP LOW BEAM BULB CONNECTOR REPLACEMENT - This bulletin provides information regarding the procedure to repair the bulb connector on some 2010MY~ vehicles listed on the table below, which may exhibit a bulb connector concern. To correct this concern, replace the connector with a new and improved part.
PS539
Service Bulletin/Repair Instructions
PITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.
TSBTRA047_R2
Service Bulletin/Repair Instructions
TSB - DRIVESHAFT SERVICEABILITY - This bulletin has been revised most recently to include additional information. This bulletin provides information regarding axle shaft serviceability for Kia vehicles equipped with a six-speed automatic transmission.
PS474
Service Bulletin/Repair Instructions
PITSTOP: TPMS SENSOR POSITION - When diagnosing TPMS-related DTCs, make sure you are investigating the correct sensor. The TPMS positioning from the manufacturer may be different from the positioning shown on a KDS.
TSBBOD107R1
Service Bulletin/Repair Instructions
TSB: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT - This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 through May 06, 2013, which may experience wind noise coming from the front door window/door frame area, at highway speeds, and/or glass run channel deformation caused by improper sealing of the front windows. To correct this concern, follow the procedure outlined in this bulletin to replace the left and right side front door glass run channels.
PS493
Service Bulletin/Repair Instructions
TSB: DEFOGGING LOGIC ? NORMAL OPERATION, DISABLING, AND ENABLING - Starting with 2010MY, all Kia vehicles, except Rio (JB), incorporate a defogging logic to prevent the interior windows from becoming excessively fogged. Depending on the specific model, the HVAC control head monitors ambient temperature and/or cabin humidity to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature or higher cabin humidity, the defogging logic may automatically switch ON the A/C, and/or set the air intake mode to Fresh Air. If the user changes these settings, the defogging logic will take control again after 3 to 5 minutes, depending on the procedure in this publication.
TSB-GEN085R1
Service Bulletin/Repair Instructions
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners, which are designed to lock into place once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.? Some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.? It is critical for technicians to be aware that ALL such locking fasteners, regardless of type, are for ?one time use? only.
TSB-GEN085
Service Bulletin/Repair Instructions
TSB: MANDATORY REPLACEMENT OF LOCKING/SECURITY HARDWARE - By design, certain fasteners utilized in various Kia models are strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.?
TSB-TRA055
Service Bulletin/Repair Instructions
TSB: INHIBITOR SWITCH DIAGNOSIS INFORMATION - This bulletin gives information regarding the steps to take regarding the diagnosis of the Inhibitor Switch.
TSB-SC135R1
Service Bulletin/Repair Instructions
TSB: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: EVAPORATIVE CANISTER INSPECTION AND/OR REPLACEMENT (SC135) - This bulletin provides information to inspect and/or replace the evaporative canister assembly on some Optima (TF) vehicles, produced from September 2, 2010 through November 29, 2014, some Optima Hybrid (TF HEV) vehicles, produced from February 15, 2011 through November 29, 2014, some Rondo (UN) vehicles, produced from April 1, 2009 through July 30, 2010, and some Sedona (VQ) vehicles, produced from April 1, 2009 through June 17, 2014. The subject vehicles originally sold or currently registered in one of twenty-eight (28) salt belt states may experience a leak detection warning of the evaporative emission systems, along with DTC(s) P0442 or P0455. For vehicles originally sold or currently registered in one of the twenty-eight (28) salt belt states, (AK, CT, DC, DE, IA, IL, IN, MA, MD, ME, MI, MN, MO, NH, NJ, NY, OH, PA, RI, VT, WI, WV, KS, KY, NE, ND, SD and UT), the evaporative canister will be inspected, and if no leak is found, the mounting bracket will be replaced with a new improved part. If a crack in the evaporative canister is found, the canister will be replaced with a new improved part. Before conducting the procedure, verify the vehicle is included in the list of affected VINs. For vehicles in other states, Kia is extending the warranty on the evaporative canister from 5 years/60,000 miles to 10 years/120,000 miles, whichever occurs first starting from the date of first service. Follow the procedures outlined in this bulletin to resolve the concern.
PS266R1
Service Bulletin/Repair Instructions
PITSTOP: HVAC RECEIVER/DRYER - DESICCANT REPLACEMENT - IN THE EVENT OF A HVAC SYSTEM CONCERN IN WHICH METAL PARTICLES OR SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO BE REPLACED. THIS IS DUE TO THE FACT THAT IT MAY BE IMPOSSIBLE TO REMOVE ALL METAL CONTAMINANTS FROM THE RECEIVER/DRYER DURING THE A/C FLUSHING PROCEDURE. REFER TO THE INCLUDED TABLE FOR DETAILED INFORMATION ON COMPONENT REPLACEMENT BY MODEL. IF YOU SUSPECT A PLUGGED EXPANSION VALVE, THE INLET SCREENS CAN BE CLEANED. IF THE VALVE IS NOT EQUIPPED WITH AN INLET SCREEN AND IS RESTRICTED, THE EXPANSION VALVE MAY ALSO NEED TO BE REPLACED.
SC135OWNER
Service Bulletin/Repair Instructions
OWNER NOTIFICATION LETTER (SC135) - DEAR KIA OWNER, KIA MOTORS AMERICA, INC. IS CONDUCTING A VOLUNTARY EMISSIONS SERVICE CAMPAIGN / WARRANTY EXTENSION PROGRAM REGARDING THE EVAPORATIVE CANISTER IN YOUR VEHICLE.
SC135DEALERP
Service Bulletin/Repair Instructions
DEALER PRINCIPAL MEMO (SC135) - ATTENTION: ALL DEALER PRINCIPALS, KIA MOTORS AMERICA, INC. IS CONDUCTING A VOLUNTARY EMISSIONS SERVICE CAMPAIGN / WARRANTY EXTENSION PROGRAM TO INSPECT THE EVAPORATIVE CANISTER. KIA HAS DETERMINED THAT THE FOLLOWING KIA VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN STATES WHERE HEAVY AMOUNTS OF ROAD SALT ARE USED, MAY EXHIBIT AN EVAPORATIVE CANISTER LEAK DUE TO PROLONGED EXPOSURE TO ROAD SALT
SC135DEALERPSM
Service Bulletin/Repair Instructions
DEALER PARTS & SERVICE MANAGER MEMO (SC135) - ATTENTION: ALL DEALER PARTS AND SERVICE MANAGERS, KIA MOTORS AMERICA, INC. IS CONDUCTING A VOLUNTARY EMISSIONS SERVICE CAMPAIGN / WARRANTY EXTENSION PROGRAM TO INSPECT THE EVAPORATIVE CANISTER. KIA HAS DETERMINED THAT THE FOLLOWING KIA VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN STATES WHERE HEAVY AMOUNTS OF ROAD SALT ARE USED, MAY EXHIBIT AN EVAPORATIVE CANISTER LEAK DUE TO PROLONGED EXPOSURE TO ROAD SALT
SC135QA
Service Bulletin/Repair Instructions
Q AND A (SC135/WTY009) - EVAPORATIVE CANISTER VOLUNTARY EMISSIONS SERVICE CAMPAIGN / WARRANTY EXTENSION PROGRAM
TSBSC135
Service Bulletin/Repair Instructions
TSB: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: EVAPORATIVE CANISTER INSPECTION AND/OR REPLACEMENT (SC135) - THIS BULLETIN PROVIDES INFORMATION TO INSPECT AND/OR REPLACE THE EVAPORATIVE CANISTER ASSEMBLY ON SOME OPTIMA (TF) VEHICLES, PRODUCED FROM SEPTEMBER 2, 2010 THROUGH NOVEMBER 29, 2014, SOME OPTIMA HYBRID (TF HEV) VEHICLES, PRODUCED FROM FEBRUARY 15, 2011 THROUGH NOVEMBER 29, 2014, SOME RONDO (UN) VEHICLES, PRODUCED FROM APRIL 1, 2009 THROUGH JULY 30, 2010, AND SOME SEDONA (VQ) VEHICLES, PRODUCED FROM APRIL 1, 2009 THROUGH JUNE 17, 2014. THE SUBJECT VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN ONE OF TWENTY-EIGHT (28) SALT BELT STATES MAY EXPERIENCE A LEAK DETECTION WARNING OF THE EVAPORATIVE EMISSION SYSTEMS, ALONG WITH DTC(S) P0442 OR P0455. FOR VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN ONE OF THE TWENTY-EIGHT (28) SALT BELT STATES, (AK, CT, DC, DE, IA, IL, IN, MA, MD, ME, MI, MN, MO, NH, NJ, NY, OH, PA, RI, VT, WI, WV, KS, KY, NE, ND, SD AND UT), THE EVAPORATIVE CANISTER WILL BE INSPECTED, AND IF NO LEAK IS FOUND, THE MOUNTING BRACKET WILL BE REPLACED WITH A NEW IMPROVED PART. IF A CRACK IN THE EVAPORATIVE CANISTER IS FOUND, THE CANISTER WILL BE REPLACED WITH A NEW IMPROVED PART. BEFORE CONDUCTING THE PROCEDURE, VERIFY THE VEHICLE IS INCLUDED IN THE LIST OF AFFECTED VINS. FOR VEHICLES IN OTHER STATES, KIA IS EXTENDING THE WARRANTY ON THE EVAPORATIVE CANISTER FROM 5 YEARS/60,000 MILES TO 10 YEARS/120,000 MILES, WHICHEVER OCCURS FIRST STARTING FROM THE DATE OF FIRST SERVICE. FOLLOW THE PROCEDURES OUTLINED IN THIS BULLETIN TO RESOLVE THE CONCERN.
TSBELE100R3
Service Bulletin/Repair Instructions
COMBINATION TSB / SERVICE ACTION: UVO SYSTEM UPGRADE (SA222) - THIS BULLETIN PROVIDES THE PROCEDURE FOR UPGRADING THE UVO SYSTEM ON SOME 2014~2016MY SOUL (PS), SORENTO (XMA)/(UMA), OPTIMA (TF HEV), FORTE (YD), SPORTAGE (SL) 2015~2016MY SEDONA (YP), AND 2014-2015(MY) OPTIMA (QT/TF) VEHICLES TO ADDRESS INCOMING RING VOLUME TOO LOUD COMPLAINTS WHEN USING CERTAIN SMARTPHONES (NON-IPHONE). ADDITIONALLY, IN 2014MY VEHICLES THE UPGRADE WILL ALSO IMPROVE BLUETOOTH CONNECTIVITY AND VOICE RECOGNITION (VR). FOR VEHICLES NOT ON THE AFFECTED VEHICLES LIST, BUT WITH A CUSTOMER CONCERN AS DESCRIBED ABOVE, PERFORM THE FOLLOWING PROCEDURE OUTLINED IN THIS BULLETIN AND SUBMIT A WARRANTY CLAIM PER "CUSTOMER CONCERN" (STANDARD TSB) CLAIM INFORMATION ON PAGE 10.
TSB-ELE-100R2
Service Bulletin/Repair Instructions
COMBINATION TSB / SERVICE ACTION: UVO SYSTEM UPGRADE (SA222) - THIS BULLETIN PROVIDES THE PROCEDURE FOR UPGRADING THE UVO SYSTEM ON SOME 2014~2016MY SOUL (PS), SORENTO (XMA), OPTIMA (TF/QF), FORTE (YD) AND SPORTAGE (SL) VEHICLES TO ADDRESS INCOMING RING VOLUME TOO LOUD COMPLAINTS WHEN USING CERTAIN SMARTPHONES (NON-IPHONE). ADDITIONALLY, IN 2014MY VEHICLES THE UPGRADE WILL ALSO IMPROVE BLUETOOTH CONNECTIVITY AND VOICE RECOGNITION. FOR VEHICLES NOT ON THE AFFECTED VEHICLES LIST, BUT WITH A CUSTOMER CONCERN AS DESCRIBED ABOVE, PERFORM THE FOLLOWING PROCEDURE OUTLINED IN THIS BULLETIN AND SUBMIT A WARRANTY CLAIM PER "CUSTOMER CONCERN" (STANDARD TSB) CLAIM INFORMATION ON PAGE 10.
PS443
Service Bulletin/Repair Instructions
TSB - USE OF AFTERMARKET USB CHARGING CABLES IN USB/12V PORTS - This article provides information regarding the use of USB ports and 12V power outlets to connect/charge mobile phones. Customers may experience issues with their head units that may be related to the use of aftermarket USB charging cables, including; * Electrical interference and limited or no functionality when attempting to play music, or when charging a device through the USB port * Excessive static or noise when listening to the audio source * Malfunctions and screen freeze of the head unit screen * Slow down of the system response while device is plugged in * Music will not play from iPhone 5 or 6 with Kia iPod cable and aftermarket adapter * No or limited functionality when trying to play music from an Apple device
TSBSST041
Service Bulletin/Repair Instructions
TSB: KDS - AUDIO UPDATE MODULE (AUM) - THE GDS AUDIO UPDATE MODULE (AUM) WAS INTRODUCED IN FOURTH QUARTER OF 2013. THIS SPECIAL SERVICE TOOL (SST) WAS DEVELOPED TO IMPROVE THE EFFICIENCY AND EFFECTIVENESS OF UPDATING 2010MY, AND LATER, KIA AUDIO HEAD UNITS USING A GDS, AND NOW, THE SAME FUNCTIONALITY IS AVAILABLE ON KDS. SOME TECHNICIANS MAY NOT BE AWARE OF THE BENEFITS THE AUM TOOL HAS TO OFFER. THE AUM ELIMINATES THE NEED FOR MULTIPLE USB FLASH DRIVES FOR SPECIFIC VEHICLE MODELS AND APPLICATIONS WHICH, IF MISAPPLIED, MAY RESULT IN AN IMPROPER AUDIO SYSTEM SOFTWARE UPDATE AND/OR LOCKED UP HEAD UNIT. ADDITIONALLY, FIELD REPORTS HAVE INDICATED THAT USB DRIVES FOR AUDIO UPDATES ARE EASILY LOST OR MISPLACED.
PS-417
Service Bulletin/Repair Instructions
KIA: CRANKSHAFT POSITION SENSOR (CKP) VARIATION HAS NOT LEARNED CAUSING MISFIRE OF ENGINE AND MALFUNCTION INDICATOR LIGHT (MIL) TO COME IN DASH. MODEL ALL. NO YEARS LISTED. *PE
TSBELE089
Service Bulletin/Repair Instructions
TSB: NAVIGATION HEAD UNIT SD CARD REPLACEMENT - THIS BULLETIN DESCRIBES THE SD CARD EXCHANGE/REPLACEMENT PROCEDURE RELATED TO ERROR MESSAGES THAT MAY BE DISPLAYED ON THE NAVIGATION SCREEN WHEN THE INCORRECT SD CARD IS INSERTED. NOTE: ONLY NEW MODELS (DURING PDI INSPECTION OR AT THE POINT OF PURCHASE) OR COMPATIBILITY MISMATCHES THAT OCCUR AFTER HEAD UNIT REPLACEMENT WILL BE CONSIDERED FOR THIS PROGRAM.
TSBTRA051R1
Service Bulletin/Repair Instructions
TSB: 6 SPD A/T SOLENOID REPLACEMENT MULTIPLE DTCS - THIS BULLETIN PROVIDES INFORMATION RELATING TO THE REPLACEMENT OF VARIOUS SHIFT SOLENOIDS ON 6-SPEED AUTOMATIC TRANSAXLES WITH DTCS P0741, P0743, P0748, P0753, P0758, P0763, P0768, P0773, P1778 AND P2709. REPLACE THE SOLENOIDS IF CURRENT OR HISTORY CODES ARE PRESENT; DO NOT REPLACE THE TRANSAXLE. TO REDUCE VEHICLE REPAIR TIME, THIS PROCEDURE CAN BE PERFORMED WITH THE TRANSAXLE INSTALLED IN THE VEHICLE. REFER TO KGIS FOR SOLENOID PACK REMOVAL AND REINSTALLATION PROCEDURES FOR THE SPECIFIC YEAR AND MODEL OF THE VEHICLE.
PS400
Service Bulletin/Repair Instructions
PITSTOP: SMART PEDAL FEATURE - THE SMART PEDAL IS AN INTEGRAL PART OF THE ENGINE MANAGEMENT SYSTEM (EMS) FUNCTIONALITY WHICH MONITORS AND PREVENTS THE SIMULTANEOUS ACTIVATION OF ACCELERATOR AND BRAKE PEDALS. WHEN ENGAGED, THE FEATURE REDUCES ENGINE POWER TO IDLE. MOST CUSTOMERS WILL NEVER NOTICE THE SMART PEDAL FEATURE WHEN ACTIVE, HOWEVER, CUSTOMERS WHO TEND TO REST THEIR FOOT ON THE BRAKE PEDAL WHILE DRIVING MIGHT DESCRIBE A HESITATION OR DELAY SYMPTOM AND NOT REALIZE THAT THE EMS ELECTRONIC CONTROL MODULE IS INTERVENING, AS DESIGNED.
SC114DEALERP
Service Bulletin/Repair Instructions
DEALER PRINCIPAL MEMO: ATTENTION: ALL DEALER PRINCIPALS - KIA MOTORS AMERICA, INC. WILL BE CONDUCTING A VOLUNTARY SERVICE CAMPAIGN, TO UPDATE THE ENGINE CONTROL UNIT (ECU) IN CERTAIN 2012-2014 MY SORENTO, 2012-2013 MY OPTIMA, AND 2012-2013 MY SPORTAGE VEHICLES EQUIPPED WITH THE 2.4L OR 2.0L TURBO GDI ENGINES, WHICH MAY EXPERIENCE THE CHECK ENGINE LIGHT OR MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION DUE TO THE DIAGNOSTIC TROUBLE CODE (DTC) P0087.
TSB-BOD107
Service Bulletin/Repair Instructions
TSB: COMBINED TSB/SERVICE ACTION: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT (SA167) - This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 through May 06, 2013, which may experience wind noise coming from the front door window/door frame area, at highway speeds, and/or glass run channel deformation caused by improper sealing of the front windows.
107
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PS306
Service Bulletin/Repair Instructions
PITSTOP: SECOND ROW SEAT RELEASE MECHANISM INOPERATIVE - When diagnosing a concern relating to a difficult to release or inoperative second row seat tumble feature, review this Article for instructions.
TSB-TRA051
Service Bulletin/Repair Instructions
TSB: 6 SPD A/T SOLENOID REPLACEMENT ? DTC P0741 - This bulletin provides information relating to the replacement of the Damper Clutch (D/C) Solenoid on 6-speed automatic transaxles with DTC P0741 (active or history), instead of replacing the transaxle. To reduce vehicle repair time, this procedure can be performed with the transaxle installed in the vehicle.
VOLUME 17 ISS 4
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-ENG133R2
Service Bulletin/Repair Instructions
TSB: SERVICE ACTION: ECM UPGRADE ? MIL ON WITH DTC P0638 AND ETC MOTOR CLEANING (SA153) - This bulletin provides information related to the ECM software upgrade for some 2011-2013MY Sorento 3.5L MPI vehicles, produced from October 25, 2009 through January 31, 2013, and 2011, 2012 & 2014MY Sedona 3.5L MPI vehicles, produced from March 03, 2010 through July 12, 2013, which may experience a Malfunction Indicator Lamp illuminated with the ECM (Electronic Control Module) system-related DTC P0638.
TSB-BOD101R1
Service Bulletin/Repair Instructions
TSB: FRONT DOOR GLASS RUN CHANNEL REPLACEMENT -This bulletin provides information on some Sedona (VQ) vehicles, produced from June 15, 2005 to May 06, 2013, which may experience wind noise coming from the sides of the windshield, at highway speeds, and/or glass run channel deformation caused by improper sealing of the front windows.
101
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-ENG137R1
Service Bulletin/Repair Instructions
TSB: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC005) - This bulletin provides information related to extracting ?in use performance tracking? emissions data from the engine control unit (ECU) in certain vehicles sold in California.
137
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSBTRA049
Service Bulletin/Repair Instructions
TSB: 6-SPEED A/T TRANSMISSION ADAPTIVE VALUES RESET/RELEARN - THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET AND RELEARN THE ADAPTIVE VALUES AFTER TRANSMISSION REPLACEMENT OR REPROGRAMMING/REPLACEMENT OF THE ECM/PCM.