Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSB_ENG263
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: MISFIRE CONCERN DUE TO OVERRUNNING ALTERNATOR DECOUPLER - This bulletin provides information to address unresolved misfire events on some 2020–2024MY Forte (BDm) produced from January 1, 2019 through September 30, 2024, and 2020–2022MY Soul (SK3) vehicles produced from November 1, 2018 through May 31, 2022 equipped with a Gamma 1.6L T‑GDI engine. In certain cases, misfire symptoms may persist after completing normal diagnostic procedures and replacing ignition‑related components (spark plugs, ignition coils, and fuel injectors). If misfire concerns remain after these repairs are performed, excessive torsional oscillation of the Overrunning Alternator Decoupler (OAD) pulley may be the contributing factor. This bulletin provides the procedure to replace the OAD pulley with the updated Overrunning Alternator Pulley (OAP) kit and associated damper components.
CS2312_TSB_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
TSB_ELE422
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: INFOTAINMENT SYSTEM SOFTWARE UPDATE USING UPDATE.KIA.COM - This bulletin provides information and service procedures for updating the infotainment systems on applicable Kia vehicles using the Kia Navigation Updater available at update.kia.com. The software update may improve system performance, enhance existing features, and apply the latest operating software for supported vehicles (2021-2026MY All Models).
TSB_CS2312_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
TSB_CS2312
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
CS2312_OWNR
Other
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)
PS797
Other
PITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a “Warning Lamp’ to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)
TSB_TRA046_R5
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.
TSB_ENG222_R8
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the table on pages 9 and 10 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
TSB_ELE378
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: KIA CONNECT MODEM RESET (SA611) - This bulletin outlines the procedure for resetting the modem in certain 2016-2025MY Kia vehicles listed on page 3 that are equipped with Kia Connect Services. The affected vehicles may encounter the following issues: remote Start/Climate Control function not working, vehicle Status on the Kia Access App not updating, connected routing not functioning properly.
TSB_ENG222_R7
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
TSB_CHA121_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FRONT STRUT BEARING & SPRING PAD REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the front strut bearing and upper spring pad on both front (LH and RH) strut assemblies on certain 2019-2024MY Forte (BDm) vehicles produced from July 09, 2018 through present, 2020-2024MY Soul (SK3) vehicles produced from November 15, 2018 through present, and 2021-2024 Seltos (SP2) vehicles produced from November 20, 2019 through present. The affected vehicles may exhibit an intermittent noise when turning the steering wheel both when driving and when the vehicle is not in motion.
TSB_CHA121_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FRONT STRUT BEARING & SPRING PAD REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the front strut bearing and upper spring pad on both front (LH and RH) strut assemblies on certain 2019-2024MY Forte (BDm) vehicles produced from July 09, 2018 through present, 2020-2024MY Soul (SK3) vehicles produced from November 15, 2018 through present, and 2021-2024 Seltos (SP2) vehicles produced from November 20, 2019 through present. The affected vehicles may exhibit an intermittent noise when turning the steering wheel both when driving and when the vehicle is not in motion.
TSB_TRA109
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: IVT OIL PRESSURE SENSOR REPLACEMENT: This bulletin provides information to replace the Intelligent Variable Transmission (IVT) Oil Pressure Sensor (OPS) on some 2018-2024MY vehicles listed on page 3 equipped with IVT. The affected vehicles may exhibit a malfunction indicator lamp (MIL) illuminated on the instrument cluster with DTCs P084500, P084600, and/or P0867XX present with no drivability concerns due to a failed IVT oil pressure sensor.
CS2305_TSB_R5
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 13, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked with the use of the key fob.
TSB_TRA046_R4
Service Bulletin/Repair Instructions
This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced.
TSB_ELE303_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: AVN 5.0 WIDE NON-RESPONSIVE RADIO ICON (AM, FM, SXM) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2024MY Kia vehicles (refer to model list on page 3) to remedy a 'non-responsive' or 'inoperative' radio (FM, AM, SXM, etc. ) concern. The affected AVN unit on the vehicles may not respond when pressing the 'RADIO' hard key/button on the AVN unit or when selecting the 'RADIO' icon on the AVN menu screen.
TSB_CHA121
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FRONT STRUT BEARING & SPRING PAD REPLACEMENT - This bulletin provides information to replace the front strut bearing and upper spring pad on both front (LH and RH) strut assemblies on certain 2019-2024MY Forte (BDm) vehicles produced from July 09, 2018 through present, 2020-2024MY Soul (SK3) vehicles produced from November 15, 2018 through present, and 2021-2024 Seltos (SP2) vehicles produced from November 20, 2019 through present. The affected vehicles may exhibit an intermittent noise when turning the steering wheel both when driving and when the vehicle is not in motion.
CS2305_TSB_R4
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 13, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
TSB_BOD212_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: PARTIAL SEAT TRACK REPLACEMENT FOR INOPERATIVE FRONT SEAT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to inspect and repair an inoperative front seat mechanism on some 2019-2024MY Forte (BDm) vehicles produced from June 18, 2018 through Present and some 2018-2023MY Rio (SC) vehicles produced from January 2, 2017 through August 16, 2023. Symptoms of an inoperative front seat include the inability of the seat to move forward and backward, which may be caused by a pin getting stuck on a rail.
TSB_CLI053_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: HVAC BLOWER MOTOR CONNECTOR REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the Heating, Ventilation, and Air Conditioning (HVAC) blower motor connector on some 2019-2023MY Forte (BDm) vehicles produced from July 09, 2018 through present, which may experience the air conditioning function inoperative. The blower motor connector pins may have poor pin tension. Poor pin tension occurs when the female pin is slightly open which will not allow for a proper electrical connection. While driving, the road conditions can cause the connector pin to slightly move within the connector and will intermittently make contact with the male pin. This can cause excessive circuit resistance, causing the blower motor to become inoperative. Follow the procedure outlined in this publication to replace the HVAC blower motor connector.
TSB_ELE303
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: AVN 5.0 WIDE NON-RESPONSIVE RADIO ICON (AM, FM, SXM) - This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2023MY Kia vehicles to remedy a 'non-responsive' or 'inoperative' radio (FM, AM, SXM, etc.) concern. The affected AVN unit on the vehicles may not respond when pressing the 'RADIO' hard key/button on the AVN unit or when selecting the 'RADIO' icon on the AVN menu screen. Follow the procedure outlined in this publication to update the software on 5th Generation AVN wide units using the applicable USB Flash Drive A or B for the applicable vehicle.
TSB_CLI053
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: HVAC BLOWER MOTOR CONNECTOR REPLACEMENT - This bulletin provides information to replace the Heating, Ventilation, and Air Conditioning (HVAC) blower motor connector on some 2019-2023MY Forte (BDm) vehicles produced from July 09, 2018 through present, which may experience the air conditioning function inoperative. The blower motor connector pins may have poor pin tension. Poor pin tension occurs when the female pin is slightly open which will not allow for a proper electrical connection. While driving, the road conditions can cause the connector pin to slightly move within the connector and will intermittently contact the male pin. This may cause excessive circuit resistance, causing the blower motor to become inoperative.
TSB_ELE209_R4
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the service reminder setting, which may have been auto-set by the Kia Vehicle Inspection and Delivery application (KVID) at time of Pre-Delivery Inspection (PDI). Beginning with the 2023MY, Oil Life Monitoring (OLM) has been applied to all models, except Forte (BDm), Stinger (CK), Telluride (ON) and Soul (SK3). Refer to TSB ENG241 for additional information. As of 08/11/2023, the service reminder auto-set feature by KVID has been disabled for ALL models NOT equipped with OLM.
CS2305C_OWNR2
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN: OWNER RE-NOTIFICATION - This document is the owner re-notification advising that Kia has developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of the original letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to the vehicle to discourage a break-in.
CS2310_TSB_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: KIA GENUINE REMOTE START CONTROL MODULE UPGRADE FOR ANTI-THEFT LOGIC COMPATIBILITY (CS2310) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 7. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature.
CS2305_TSB_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 13, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2310_TSB
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN CUSTOMER SATISFACTION: KIA GENUINE REMOTE START CONTROL MODULE UPGRADE FOR ANTI-THEFT LOGIC COMPATIBILITY (CS2310) - This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 6. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature.
TSB_TRA102_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: IVT SOFTWARE LOGIC IMPROVEMENT AND/OR IVT REPLACEMENT - This bulletin provides the procedure to update the Transmission Control Module (TCM) software logic and, if necessary, replace the Intelligent Variable Transmission (IVT) assembly on certain 2019-2021MY model vehicles listed in the chart below, which may exhibit an MIL ON with the DTC(s) listed below and a lack/delay in acceleration due to transmission slippage.
TSB_ENG243
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: LOOSE CRANKSHAFT PULLEY PARTIAL REPAIR - This bulletin provides information regarding a loose crankshaft pulley condition on certain 2020-2023MY Forte (BDm) vehicles equipped with a 1.6L T-GDI and 6-speed manual transmission, produced from May 15, 2019 through present, where excessive engine loads may cause the crankshaft pulley bolt to back out, causing the crankshaft pulley to come loose. If this condition occurs, a loose crankshaft pulley may cause the alignment dowel pin to shear and the crankshaft pulley to separate from the crankshaft.
TSB_BOD314
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: OVERHEAD CONSOLE SUNGLASS DOOR-LATCH REPAIR - This bulletin provides information to repair the overhead console lamp assembly and sunglass door latch on some 2012-2023MY model vehicles listed in the table below, which may encounter the sunglass case of the overhead console lamp not closing properly.
CS2305_TSB_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 13, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
CS2305_TSB_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 10, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation.
CS2305C_OWNRBDM
Service Bulletin/Repair Instructions
CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia has developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of this letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to your vehicle to discourage a break-in.
CS2305_TSB
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 10, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation.
PS677_R2
Service Bulletin/Repair Instructions
PIT STOP: LOG FILE COLLECTION FOR AVN 5.0/W AND DISPLAY AUDIO 2.0 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.
TSB_FUE052_CLSD
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN CLOSED: FUEL TANK INLET CHECK VALVE (ICV) MODIFICATION - FUE052 Superseded by FUE056
TSB_CLI048_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR: COMPRESSOR FIELD COIL ASSEMBLY INSPECTION AND REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding A/C Compressor Field Coil Assembly inspection and replacement on some 2017-2018MY Forte (YDm) and 2019-2023MY Forte (BDm) vehicles.
TSB_TRA046_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.
TSB_ENG219_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: MAINTENANCE REMINDER FEATURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.
TSB_ELE209_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode."
PS672_R1
Service Bulletin/Repair Instructions
PITSTOP: REAR OCCUPANT ALERT (ROA) W/REAR DOOR LOGIC - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding the Rear Occupant Alert (ROA) with Rear Door Logic system on all 21MY~ models equipped with this feature. This system is designed to help prevent a rear passenger from being left inside the vehicle when exiting. The "Check Rear Seats" message will display on the cluster when driver opens the front door, if during vehicle operation the rear doors (one or both) were opened and closed.
TSB_TRA102
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: IVT SOFTWARE LOGIC IMPROVEMENT AND/OR IVT REPLACEMENT - This bulletin provides the procedure to update the Transmission Control Module (TCM) software logic and, if necessary, replace the Intelligent Variable Transmission (IVT) assembly on certain 2019-2021MY model vehicles listed in the chart below, which may exhibit an MIL ON with the DTC(s) listed below and a lack/delay in acceleration due to transmission slippage. To correct this concern, if necessary, apply the improved software logic to the CVT system using the KDS ECU Upgrade function as described in this bulletin and replace the IVT assembly.
PS613_R1
Service Bulletin/Repair Instructions
PITSTOP: INSTRUMENT CLUSTER REPLACEMENT AND MILEAGE SETTING WITH KDS - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This pitstop provides the KDS service procedure for mileage setting on the models listed below with newly replaced instrument clusters. Certain models allow for mileage setting with the KDS, which prevents the need to send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS. Make sure the KDS software is also updated to the latest version. Mileage setting should be performed by using the KDS only, as described in this bulletin.
TSB_ENG222_R6
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
PS576_R2
Service Bulletin/Repair Instructions
PITSTOP: BATTERY DEALER (SHIPPING)/CUSTOMER MODE SWITCH - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding a new interface related to the electronic Dealer (Shipping) / Customer Mode Switch setting on all applicable models.
TSB_ENG222_R5
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
TSB_ENG222_R4
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
TSB_ELE231_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FRONT VIEW CAMERA REPLACEMENT FOR DTC C160449 & C160649 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW).
SC199_TSB_R1
Service Bulletin/Repair Instructions
VOLUNTARY EMISSIONS SERVICE CAMPAIGN: IVT SOFTWARE LOGIC IMPROVEMENT AND/OR IVT REPLACEMENT (SC199) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. (This bulletin was previously referred to as SA424 or ELE 200.) This bulletin provides the procedure to update the Transmission Control Module (TCM) software logic and, if necessary, replace the Intelligent Variable Transmission (IVT) on certain 2019-2021MY vehicles listed in the chart below. The affected vehicles may exhibit the illumination of MIL with the DTC(s) listed below in addition to a lack of acceleration or delay in accelerating due to transmission slippage.
TSB_CHA111
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: REPLACEMENT OF MOBIS C-MDPS SMALL BEARING - This bulletin provides the procedure to replace the small bearing of the Column Motor Driven Power Steering (C-MDPS) unit on the vehicles listed below, which may exhibit an abnormal noise when steering left and right. This may be caused by foreign substances in the MDPS worm shaft small bearing. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Small Bearing and does not affect the steering effort.
TSB_CHA084_R8
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU, WORM GEAR AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly and does not affect the steering effort.
TSB_BOD055_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.
TSB_ENG222_R3
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2019MY vehicles (refer to table below for applicable model and engine), which may exhibit a symptom of excessive oil consumption.
TSB_ELE231_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FRONT VIEW CAMERA REPLACEMENT FOR DTC C160449 & C160649 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW).
PS704
Service Bulletin/Repair Instructions
PITSTOP: FRONT RADAR SENSOR MOUNTING INSPECTION (PS704) - This pitstop provides information regarding front radar sensor alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.
PS677_R1
Service Bulletin/Repair Instructions
PIT STOP: LOG FILE COLLECTION FOR AVN 5.0/W AND DISPLAY AUDIO 2.0 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.
TSB_ELE231_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FRONT VIEW CAMERA REPLACEMENT FOR DTC C160449 & C160649 - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles listed below. Due to an internal control chip concern inside the camera, the vehicle may exhibit an MIL on with DTC C160449 and/or C160649.
TSB_FUE052
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: FUEL TANK INLET CHECK VALVE (ICV) MODIFICATION - This bulletin provides information on the modification of the fuel tank Inlet Check Valve (ICV) on some 2019-2021MY Forte (BDm) vehicles produced from July 9, 2018 through December 2, 2020, which may exhibit fuel spit-back from the Fuel Filler Neck, after the tank has been filled up, and the nozzle clicks off.
TSB_ELE209_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.
TSB_CHA084_R7
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU, WORM GEAR AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.
PS576_R1
Service Bulletin/Repair Instructions
PITSTOP: BATTERY DEALER / CUSTOMER MODE SWITCH - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding a new interface related to the electronic Dealer / Customer Mode Switch setting on multiple models.
PS677
Service Bulletin/Repair Instructions
PITSTOP: LOG FILE COLLECTION FOR AVN 5.0/W & DISPLAY AUDIO 2.0 - This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.
TSB_ELE209_R1
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.
TSB_ENG216_R2
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC21) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to extracting âÃÂÃÂin use performance trackingâÃÂàemissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.
TSB_ELE225
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: LED HEADLAMP REPLACEMENT (SA455) - This bulletin provides the procedure to replace the LED headlamp(s) on certain 2021MY Kia Forte (BDm) vehicles produced from October 28, 2020 through November 24, 2020. The LED headlamps installed on certain 2021MY Forte (BDm) vehicles may be assembled with the inappropriate LED Drive Module (LDM) and may turn ON the indicator lamp in the instrument cluster via IBU. The condition has no effect on normal operation for the low or high beams.
TSB_ENG216_R1
Service Bulletin/Repair Instructions
TSB - DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC21) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to extracting âin use performance trackingâ emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.
PS663
Service Bulletin/Repair Instructions
PITSTOP: MFC, CONCERNS FOR DISABLED OPERATION - This Pitstop provides information regarding concerns with disabled operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.
PS299_R4
Service Bulletin/Repair Instructions
PITSTOP: CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. When servicing windshield wipers on the below listed vehicles, including during PDI, ensure to raise the wiper arms to a vertical position to avoid damaging the paint on the rear edge of the hood.
TSB_ELE209
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.
PS675
Service Bulletin/Repair Instructions
PITSTOP - BRAKE CALIPER LEAK INSPECTION - This PITSTOP provides information related to a brake caliper fluid/oil substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.
TSB_ENG219
Service Bulletin/Repair Instructions
TECHNICAL SERVICE BULLETIN: MAINTENANCE REMINDER FEATURE - This bulletin provides information on setting the "Service Interval Reminder" feature available on most Kia vehicles. If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance.